Model V-EP Attic sprinkler from Viking allows for design with lower flow rates

by Products

The Viking Corporation has announced availability of a new specific application sprinkler designed to protect challenging attic spaces. The 5.6 K-factor “Model V-EP” VK690 allows for an enhanced system design which eliminates the need for additional branch lines, reducing installation and materials costs. In addition, the sprinkler can reduce flow and pressure requirements compared to other attic protection schemes.

When used in conjunction with Viking’s existing Model VK697 5.6 K-factor attic upright sprinkler, the new Model V-EP attic sprinkler can protect up to 80 ft roof spans using 3 branch lines, and up to 100 ft spans with a 5 branch line design, with roof pitches ranging from 2½:12 through 6:12. Additionally, the VK697 and VK690 used together allow for flows as low as 20 gallons per minute and a minimum operating pressure of 13 psi. Thorough design criteria may be found on the sprinkler’s technical data sheet.

The cULus Listed sprinkler is available in brass or corrosion resistant ENT plating. With a thread size of 1/2” NPT or 15 mm BSPT, the 5.6 (80) K-factor sprinkler can be ordered with an intermediate temperature rating of 200° F (93° C).

The product joins Viking’s complete line of attic sprinklers, which also includes back-to-back, single directional, and HIP style sprinklers.

www.vikinggroupinc.com

Interactive Valve and System Configurator from Viking Group

by Products

Viking Group has introduced a digital tool that assists its users in the configuration of Viking valve and trim selections. The new “Valve and System Configurator” simplifies the complex process of identifying and ordering the proper valve and trim combination for virtually any fire protection challenge.

The configurator, which can be accessed at http://webtools.vikingcorp.com/valveconfig/, allows customers to interactively build a complete system riser for Viking’s wet, dry, deluge and precaution systems. Additional systems, including flow control, pressure regulation, and Firecycle®, will be added in the spring.

“Viking offers hundreds, if not thousands, of valve and trim combinations,” said Jeff Norton, Vice President of Marketing for Viking Group. “Our digital solutions team worked tirelessly to ensure that this tool saves time and produces just the right solution for our customers’ needs.”

In the configurator, customers first select their desired system type. Next, the configurator walks the user through selecting an appropriate valve, trim set, and available system options. Throughout the configuration process, a representative 3D model of the system is dynamically rendered, allowing the specific system to be analysed from any angle.

After all the selections are made, a summary is generated with a complete bill of materials including part number, description, and quantity. This list can be sent to Viking SupplyNet automatically for quoting.

Finally, a zip file is provided that contains all related technical documentation for the system riser, including technical data sheets, trim diagrams, and friction loss charts.

For more information about the Viking Valve & System Configurator, visit http://www.vikinggroupinc.com.