Winter fire safety in NSW: Government campaign urges smoke alarm checks

NSW sees winter rise in fire-related deaths and injuries

The New South Wales Government has launched Fire and Rescue NSW’s annual Winter Fire Safety campaign, highlighting a seasonal increase in home fire incidents and associated risks.

According to the New South Wales Government, the campaign began as winter temperatures led to a 13 percent increase in house fires during colder months.

Between 1 June and 30 August 2024, over 1,000 fires occurred in homes across the state, resulting in 12 fatalities and injuries to more than 100 people.

Smoke alarm failures linked to nearly half of winter fires

Fire and Rescue NSW reported that 44 percent of winter home fires in 2024 occurred in dwellings where either no smoke alarm was installed or the device failed to activate.

It added that 42 percent of fires during this period began in household kitchens.

Across all of 2024, there were 3,674 residential fires in NSW, resulting in 25 deaths.

In 45 percent of these cases, no working smoke alarm was present.

Lithium-ion battery safety a continuing concern

The campaign also draws attention to hazards related to lithium-ion batteries.

Fire and Rescue NSW stated that 115 battery-related incidents were recorded in the state during 2024 so far.

Of these, 42 incidents were linked to e-bikes and e-scooters.

The service warned that charging, storing or disposing of these devices incorrectly may cause fires or explosions.

Community support efforts launched alongside campaign

Fire and Rescue NSW said that its crews would be visiting households to carry out free safety checks and offer guidance on preventing winter fire risks, including battery charging behaviour.

Firefighters will also install smoke alarms at no cost where needed.

The public can request a free home fire safety visit and alarm installation at any time through the Fire and Rescue NSW website.

Minister for Emergency Services Jihad Dib said:
“This winter the NSW Government wants to ensure households have a working smoke alarm installed.

“They can give residents the crucial seconds needed to get everyone out safely.

“In my own community of Bankstown, dozens of fires broke out in homes last winter, and more than half of those homes didn’t have a working smoke alarm installed.

“If you need help, our firefighters are here for you.

To test a smoke alarm please book a safety visit through the Fire and Rescue NSW website or by calling your local fire station.”

Fire and Rescue NSW Commissioner Jeremy Fewtrell said:
“The risk of fires in our homes increases during the colder months as we try to stay warm and cook more hot meals.

“Keep looking when cooking – never leave cooking unattended and don’t throw water onto a fat fire as it will intensify the flames – use a fire blanket or extinguisher instead.”

Targeted data shows high-risk areas across NSW

Fire and Rescue NSW published a breakdown of the number of winter house fires in 2024 by local government area (LGA), along with the proportion of incidents in homes without functioning smoke alarms.

Canterbury-Bankstown experienced the most fires (63), with 51 percent of homes lacking a working alarm.

Wollongong had 30 house fires, and 60 percent were reported to have no operational smoke alarm.

Other LGAs with high fire counts included Blacktown (53), Central Coast (45), and Cumberland (43), each reporting a large share of fires occurring in homes without functioning alarms.

Winter fire safety in NSW: Summary

The New South Wales Government has launched Fire and Rescue NSW’s Winter Fire Safety campaign.

It reported a 13 percent increase in house fires during winter 2024 compared to the rest of the year.

Between June and August 2024, there were over 1,000 home fires across NSW.

These incidents resulted in 12 deaths and more than 100 injuries.

In 44 percent of winter home fires, there was no working smoke alarm or the device failed.

Kitchen fires made up 42 percent of the total during this period.

Throughout 2024, 3,674 residential fires occurred in the state.

These led to 25 deaths, and 45 percent of homes affected had no operational smoke alarm.

Fire and Rescue NSW recorded 115 lithium-ion battery incidents in 2024 so far.

Of those, 42 were related to e-bikes and e-scooters.

The agency warned against unsafe charging, storage and disposal practices.

Free safety checks and smoke alarm installations are being offered by firefighters across NSW.

The campaign encourages residents to book a fire safety visit through the service’s website.

Hochiki Europe donates match tickets to Medway Soccer Academy

Football ticket competition supports Gillingham youth initiative

Hochiki Europe has reported that it awarded 35 tickets to a Gillingham FC home match to Medway Soccer Academy as part of its “Golden Ticket” competition.

The grassroots academy, based in Gillingham, Kent, was selected for its provision of affordable football sessions for local children.

The initiative was founded in 2019 by Matt Waters and operates on a £4 “pay and play” model.

Hochiki team visit academy training with Gillingham FC player

Hochiki Europe stated that Marketing Manager Craig Taylor and Marketing Project Specialist Kara Martin visited the academy during a training session held at a local community park.

They were joined by Gillingham FC midfielder Ethan Coleman.

According to the company, Coleman spent over an hour speaking with children and coaches, discussing his professional experience and responding to questions from the group.

The children reportedly asked about Coleman’s pre-match routines, football inspirations and personal interests.

Parents highlight academy’s affordability and impact

Hochiki Europe said that Kara Martin also spoke with parents in attendance at the training session.

The parents reportedly described the academy as an important activity for families who could not commit to regular team schedules.

They also emphasised the academy’s role in improving children’s confidence and social engagement.

Martin said: “Matt’s unwavering commitment to the community is inspiring.

“Many of these children would otherwise miss out on the experience of a live football match.”

Training session ends with raffle and ticket presentation

Hochiki Europe reported that the visit concluded with a penalty shootout involving academy participants.

Children who scored during the shootout were entered into a raffle to win a future Gillingham FC training experience.

The company stated that Ethan Coleman presented Matt Waters with a golden envelope containing the 35 tickets to the Gillingham FC vs Swindon Town match, which took place on 26 April.

Matt Waters said: “We are incredibly grateful to Hochiki Europe for this amazing opportunity.

“This means the world to our children, many of whom have never experienced a live football game.

“It’s a testament to the hard work of our volunteer coaches and the dedication of our young players.”

Hochiki Europe donates match tickets to Medway Soccer Academy: Summary

Hochiki Europe donated 35 match tickets to Medway Soccer Academy through its “Golden Ticket” competition.

The academy was founded in 2019 by Matt Waters and offers £4 “pay and play” sessions for local children.

The donation was awarded during a visit from Hochiki staff and Gillingham FC midfielder Ethan Coleman.

Coleman spoke with children and coaches about his football career.

Parents at the session said the academy provides accessible and supportive activities for local families.

The event included a penalty shootout and a raffle for a future training experience.

The 35 tickets were for the Gillingham FC vs Swindon Town match on 26 April.

Waters said the donation recognised the work of the volunteer coaches and young players.

Hochiki Europe is the Rainham End sponsor of Gillingham Football Club.

C-TEC CAST fire alarm systems now covered by extended warranty

Warranty introduced across full range of CAST-powered systems

C-TEC has confirmed that all CAST-powered life safety products manufactured from 1 May 2025 will now be covered by a 5-year warranty.

According to the company, the extended warranty includes the XFP and ZFP CAST addressable fire systems, the EVAC-ALERT BS 8629 evacuation alert system, the HUSH-PRO BS 5839-6 Grade C residential fire alarm systems and the CAST-PRO combined detection and alarm devices.

The manufacturer stated that this decision reflects confidence in its design, production and testing processes, all of which take place in-house in the UK.

Manufacturing process and quality assurance behind decision

C-TEC’s Manufacturing Director Peter Butterworth said: “We are incredibly proud of our manufacturing capabilities and our continued investment in cutting-edge technology and third-party certification.”

Butterworth added: “The decision to offer a 5-year warranty on our CAST-powered systems stems from the confidence we have in our manufacturing process quality and employee expertise.”

He said: “Every single one of our products is designed, manufactured and tested here at C-TEC to give us complete control over our processes and give our customers the confidence that our systems will work seamlessly in any situation.”

Warranty applies from 1 May 2025 for all CAST products

C-TEC stated that the extended warranty is effective only for CAST products manufactured after 1 May 2025.

The company explained that CAST (C-TEC Addressable System Technology) is its proprietary life safety protocol, designed to support quick installation, maintenance and operation.

C-TEC noted that all its key product lines are powered by CAST, including both commercial fire detection and residential alarm systems.

Sales director cites benefit for domestic and international users

Charlotte Manley, Sales Director at C-TEC, said: “Our CAST-powered life safety systems are proving to be a huge success not just in the UK but overseas too.”

Manley added: “The addition of a 5-year warranty across the entire range, combined with the EN54-13 system certification we have had on our XFP and ZFP CAST fire systems for some time, will hopefully provide the reassurance everyone in the supply chain needs that our systems are the right choice for multiple applications.”

She said: “Whatever the situation, CAST can help and I would urge anyone with an upcoming original project to get in touch as we have some very special project pricing available for first time CAST purchasers.”

C-TEC CAST fire alarm systems now covered by extended warranty: Summary

C-TEC has introduced a 5-year warranty on all CAST-powered fire safety systems.

The warranty applies to products manufactured after 1 May 2025.

Covered systems include the XFP and ZFP CAST addressable fire alarms.

Other eligible products include the EVAC-ALERT evacuation system and HUSH-PRO residential systems.

The CAST-PRO detection and alarm range is also covered.

C-TEC said the warranty reflects its in-house design and manufacturing standards.

Peter Butterworth said the company’s control over production supports this move.

Charlotte Manley said the warranty, alongside existing certification, supports product reliability.

CAST systems are used in UK and international projects.

The company encouraged potential buyers to contact their account managers for more details.

Advanced fire system installation at Eribé Knitwear enhances safety in Scotland

Advanced system supports fire safety upgrade at Scottish knitwear facility

Fire protection manufacturer Advanced has provided a wireless-enabled fire alarm system at the Eribé Knitwear headquarters in Melrose, Scotland.

According to Advanced, its MxPro 5 analogue addressable fire panel was chosen for installation following a fire risk assessment that identified the need for Category L2 coverage.

Safe Services, a fire and security service provider, replaced the outdated fire system at the Eribé site with the new MxPro 5 panel.

Fire safety retrofit enabled by wireless integration

Safe Services reported that the MxPro 5 panel was retrofitted using an EMS Firecell wireless detection system.

It explained that the wireless configuration reduced the need for cabling throughout the building, which helped to minimise disruption.

Graeme Millar, Fire Technical Sales Engineer at Safe Services, said: “We were responsible for the installation, commissioning, verification and handover of the system at Eribé, and will also be conducting ongoing maintenance.

“We have several sites we have worked on with the same combination, and know the Advanced MxPro 5 works well with EMS equipment.

“The Advanced MxPro 5 is our panel of choice as it’s a trusted and reliable panel with our design and installation teams.”

Eribé prioritised safety as part of 2024 business review

Eribé Knitwear began a comprehensive business assessment in 2024, which included an internal review of its fire protection arrangements.

The company stated that the fire system upgrade was part of its commitment to protecting staff and visitors.

Tamsin Ansdell of Eribé Knitwear said: “In 2024 we reviewed our business as a whole to strengthen our processes.

“The safety of our staff, premises, and customers was a priority and so we were fully behind investing in an Advanced fire safety system.

“We are now really proud to say that with the help of Safe Services, our extended team, managers and directors feel far more knowledgeable regarding the risks and actions, and the whole team feels safer and more invested in it as a result.”

Advanced MxPro 5 panel offers configurable and scalable protection

Advanced said that its MxPro 5 fire panel is compatible with wired and wireless systems and can be used in networks of up to 200 panels.

The panel is certified to the EN 54 standard by FM Approvals and supports four detector protocols.

Neil Parkin, Sales Manager at Advanced, said: “Choosing wireless equipment when installing a fire system is ideal for retrofitting, where cabling can be trickier to install and visually unappealing.

“Add to that the time and cost benefits they provide to installers, and it is a great choice in multiple scenarios both large and small.

“Our MxPro 5 panels are designed to make life as easy as possible, delivering robust protection that offers real peace of mind, all backed up by our highly rated technical support.”

Advanced fire system installation at Eribé Knitwear enhances safety in Scotland: Summary

Fire protection solutions manufacturer Advanced supplied a wireless-capable MxPro 5 fire panel to Eribé Knitwear.

The system was installed in Melrose, Scotland, after a fire risk assessment identified the need for Category L2 coverage.

Safe Services conducted the installation, using the EMS Firecell wireless system to avoid disruptive cabling.

The MxPro 5 panel replaced an outdated system that could not be upgraded to current standards.

The panel is certified to EN 54 by FM Approvals and can be configured with up to 200 panels in a network.

Eribé Knitwear reviewed its operations in 2024 and prioritised safety system upgrades as part of the process.

Eribé said its staff now feel more knowledgeable and safer as a result of the fire system installation.

Advanced reported that the panel supports multiple protocols and includes wireless functionality.

The system’s wireless features simplify installation and enable easier maintenance scheduling.

The installation was completed by Safe Services, who will also carry out future servicing.

STI launches G3 and GF push button series in EMEA with optional IP camera

STI expands launch of G3 and GF push buttons to EMEA

Safety Technology International (STI) has introduced its G3 and GF push button series across Europe, the Middle East and Africa (EMEA), following their earlier deployment in the United States.

According to STI, the new series is designed for fire, access control and intrusion systems and was first showcased at Intersec 2025.

STI reported that early adopters include major infrastructure projects in the Middle East, such as airports and stadiums.

Visual accountability through integrated camera technology

The company stated that a defining feature of the G3 and GF range is an optional built-in IP camera designed to support visual identification and accountability.

STI said the camera provides eye-level footage of individuals interacting with the device, which it explained helps address limitations of overhead CCTV in capturing identifying features when hats or hoods are worn.

It added that the camera captures footage before, during and after button activation, which supports incident analysis and helps deter misuse.

Sibtain Naqvi, Head of Marketing & Product Management at STI, said:
“We designed these buttons not just to perform a function, but to address a real issue in the industry: the growing challenge of malicious activations and alarm fatigue.
“The optional camera delivers an immediate step-change in accountability and deterrence.”

Fire and security applications with regional compliance

STI explained that the G3 is suitable for access control and security use, while the GF is intended for fire alarm integration.

Both devices are made from impact-resistant polycarbonate and offer operational variants such as Momentary, Key-to-Reset and Turn-to-Reset.

Protective covers, available with or without built-in sounders, comply with recommendations in BS 5839-1:2017, which advises the use of covers to reduce false alarms.

STI confirmed that the GF model is UL-listed, a factor it noted is particularly relevant to the Middle East, where UL certification is commonly required for fire safety systems.

Supporting UK site readiness and Martyn’s Law compliance

The company highlighted that the introduction of the G3 and GF series aligns with new requirements under the Terrorism (Protection of Premises) Act 2025, known as Martyn’s Law.

According to STI, the optional IP camera can support documentation requirements under the law by capturing footage that aids incident detection, lockdown activation and evacuation planning.

It added that these capabilities may assist venues in demonstrating efforts to improve site readiness and reduce vulnerability to potential threats.

The legislation is currently in its implementation phase.

Technical specifications and industry response

STI confirmed that the G3 model uses a DPDT (2 Form C) switch and the GF uses an SPDT (Form C) switch, both rated for 30 VAC/VDC at 5 A.

It stated that the optional IP camera supports a 180-degree diagonal view, 5MP resolution at 30 frames per second, and is powered via 12VDC.

The company said that feedback from Intersec attendees in the Middle East has been positive, with security professionals expressing interest in the products’ potential to reduce call point misuse and improve alarm management.

STI launches G3 and GF push button series in EMEA with optional IP camera: Summary

STI has launched its G3 and GF push button series across EMEA.

The series was first introduced at Intersec 2025.

The company said the push buttons are designed for fire, access control and intrusion systems.

An optional built-in IP camera captures real-time footage at eye level.

STI stated the camera helps reduce false activations and supports incident response.

The G3 is for general access and security use.

The GF is designed for fire alarm integration and is UL-listed.

Both are made from impact-resistant polycarbonate.

They offer multiple reset configurations and optional protective covers.

STI noted that the camera’s footage can support Martyn’s Law readiness.

The camera supports 5MP resolution and 180-degree field of view.

Switch ratings are 30 VAC/VDC, 5 A.

The launch follows earlier deployment in the United States.

STI reported that early adopters include Middle East infrastructure sites.

Feedback from Intersec attendees was positive, the company added.

Hochiki fire detection system installed at new West Sussex care home

Hochiki system supports fire safety at Merriman Grange

Hochiki has provided a new fire detection and alarm system for Merriman Grange, a newly opened care home in Worthing, West Sussex.

According to Hochiki, the project involved collaboration with Southern Fire Alarms to install a full L1 category system across the three-storey building.

The care home, which includes a dementia care unit, required technology that could accommodate vulnerable residents while ensuring full coverage and integration with the site’s building management systems.

Full L1 coverage installed throughout the care facility

Southern Fire Alarms was responsible for designing and installing the fire safety system as part of the care home’s new build.

Hochiki’s ESP range was selected as the main technology used for the installation.

Naomi Fell of Southern Fire Alarms said: “When it comes to reliability and ease of installation, Hochiki is our go-to manufacturer. Their ESP range of addressable products are consistently high-quality, and their integration capabilities are second to none.”

She added: “For a complex project like Merriman Grange, where we needed a robust and dependable system that also considered the specific needs of dementia residents, Hochiki was the perfect choice.”

Adapted fire alarms help minimise stress for dementia residents

The care home includes a dedicated unit for dementia care, which posed particular requirements in terms of alarm functionality.

Devices were selected based on their capacity to adjust alarm tones and volumes, in order to reduce the risk of causing distress to residents with dementia.

According to Hochiki, their equipment allowed the fire detection system to be tailored in a way that supported the wellbeing of residents while maintaining effective alerting.

Integration and usability considered throughout the installation

The Hochiki ESP range was chosen in part for its ability to integrate with building management systems.

This was seen as essential for the overall functionality of Merriman Grange, ensuring building services operated efficiently together.

Naomi Fell said: “Their devices are designed to minimise false alarms and provide clear, reliable warnings, which is crucial in a care home environment. We know that with Hochiki, we’re providing our clients with the best possible protection.”

Fire alarm installation enhances care home safety in Worthing: Summary

Hochiki provided a fire detection and alarm system for Merriman Grange care home in Worthing.

Southern Fire Alarms installed the full L1 category system during the home’s construction.

The ESP range was selected for its compatibility, ease of installation and capacity to adjust alarm outputs.

The system was adapted for a dementia care unit using adjustable tones and volumes to minimise distress.

All areas of the three-storey building are covered by the system, including private and communal spaces.

The system is integrated with the building’s management infrastructure.

The installation aimed to support ease of use for staff and reduce the likelihood of false alarms.

Naomi Fell of Southern Fire Alarms said Hochiki was selected for reliability and product quality.

Comelit-PAC wireless fire alarm installed at listed Bradford building

Listed Bradford building receives fire safety upgrade

Comelit-PAC has reported that its LogiFire wireless system has been installed at Guardian House, a listed building in Bradford.

The installation was part of a refurbishment project led by Inspired Neighbourhoods in collaboration with Centurion Fire & Security Ltd, aimed at redeveloping the former Bradford City Registry Office for modern office use and community services.

Guardian House had been unused and was at risk of falling into disrepair. Inspired Neighbourhoods is refurbishing the building as part of a wider regeneration initiative in Bradford city centre.

Wireless system installed to preserve historical structure

Centurion Fire & Security Ltd recommended upgrading the fire detection and alarm system due to issues with the existing infrastructure.

The wireless version of Comelit-PAC’s LogiFire system was selected for installation in the building’s graded areas to avoid the need for additional cabling, which would have impacted the structure.

Nathan Douglas-Smith, Director of Centurion Fire & Security Ltd, said: “The installation at Guardian House was a unique challenge due to its listed status and historical significance.

“Comelit-PAC’s LogiFire wireless system provided the perfect solution, allowing us to enhance fire safety without compromising the building’s structure and aesthetics.”

Project forms part of community regeneration plan

Inspired Neighbourhoods is overseeing the redevelopment, which aims to attract daily footfall and contribute to local economic growth.

Assim Hussain, Chief Executive Officer of Inspired Neighbourhoods, said: “We are committed to revitalising the building, maximising community benefit, and contributing to the economic regeneration of Bradford’s city centre. The redevelopment plan anticipates hosting a range of services that will attract up to 300 people to the city centre daily.”

He added: “With such a responsibility to the community, we have to ensure their complete safety. Centurion Fire & Security Ltd supported us to deliver on total fire protection, recommending Comelit-PAC’s LogiFire wireless system to perfectly suit the building’s intended needs while preserving its historical integrity.”

System features remote monitoring and modular installation

Comelit-PAC stated that the LogiFire range includes wireless addressable and conventional translators with remote and cloud-based monitoring capability.

The company explained that these translators reduce installation time and remove the need for extensive wiring, which is beneficial in heritage properties.

Mandy Bowden, Comelit-PAC Fire Manager, said: “The demand for wireless fire detection systems is growing significantly, and our LogiFire solution is at the forefront of this innovation.

“By offering a system that combines ease of installation with advanced monitoring capabilities, we can ensure listed buildings like Guardian House are protected.

“At the same time, we demonstrate how heritage and modern technology can work hand in hand to create safer communities.”

Wireless fire alarm system fitted at Guardian House in Bradford: Summary

Comelit-PAC has announced the installation of its LogiFire wireless system at Guardian House in Bradford.

The listed building, formerly the Bradford City Registry Office, is undergoing refurbishment by Inspired Neighbourhoods.

The LogiFire system was installed by Centurion Fire & Security Ltd to address deficiencies in the previous alarm system.

The wireless solution avoids the need for cabling, helping preserve the building’s historic structure.

The project supports Inspired Neighbourhoods’ goal of community and economic regeneration in Bradford city centre.

LogiFire devices include addressable translators with cloud and remote monitoring features.

The system reduces installation time and enables fault detection and alarm reporting via the panel and cloud.

The project is expected to support up to 300 visitors per day once services open at Guardian House.

Hochiki ESP system installed at KL Logistic warehouse in Slovakia

Fire detection system installed at 17,000m² Slovakian facility

Hochiki has reported that its ESP intelligent fire detection system has been installed at a new logistics facility in Slovakia.

The 17,000 square metre warehouse, operated by KL Logistic near Galanta, required a tailored fire safety system due to its large scale and the nature of its high-rack storage.

Fire protection specialist Pro Metheus Slovakia oversaw the design and installation of the detection and evacuation system, which features Hochiki’s ESP range and FIRElink aspirating smoke detection system.

ESP devices and aspirating system support early fire detection

Hundreds of Hochiki ESP optical smoke detectors were installed throughout the warehouse to provide early warning in the event of fire.

Hochiki’s FIRElink aspirating smoke detection system was also installed to cover areas where conventional smoke detectors may be less effective, such as dense storage racks and hard-to-access sections.

These systems are networked using Hochiki’s Enhanced System Protocol (ESP), creating a coordinated detection solution across the entire facility.

Control panels and modules integrated with fire suppression system

Central control and monitoring is managed via Hochiki HFP control panels connected through the ESP protocol.

Input and output modules from Hochiki were also installed to integrate the fire detection system with the building’s sprinkler infrastructure.

This configuration enables automated responses in case of a fire, linking detection and suppression through a single coordinated system.

Voice evacuation included for personnel safety

In addition to detection and suppression systems, a voice evacuation solution was implemented across the site.

This enables timely communication with on-site personnel and supports safe evacuation procedures during an emergency.

Tibor Lelkes, CEO of Pro Metheus Fire, said: “The scale and complexity of the KL Logistic warehouse demanded a fire detection system that was both powerful and dependable.

“Hochiki’s comprehensive product portfolio, coupled with their sophisticated networking capabilities, enabled us to design a solution that precisely met the client’s specific requirements.

“The inclusion of the voice evacuation system was a key factor in providing KL Logistic with complete peace of mind.

“We are proud to have delivered a system that significantly enhances the safety of their employees and protects their valuable assets.”

Hochiki ESP system installed at KL Logistic warehouse in Slovakia: Summary

Hochiki has confirmed that its ESP intelligent fire detection system has been deployed at a 17,000 square metre KL Logistic warehouse near Galanta, Slovakia.

Fire safety contractor Pro Metheus Slovakia managed the design and installation.

The system includes hundreds of ESP optical smoke detectors and a FIRElink aspirating smoke detection system for inaccessible areas.

Hochiki’s HFP control panels and ESP modules have been used to link the detection and sprinkler systems.

A voice evacuation system has also been integrated.

All components are networked using Hochiki’s ESP protocol.

Senseco Systems acquires Ceaton Security to expand fire detection services in Wales

Ceaton Security joins Senseco Systems in UK-wide fire safety expansion

FRP Advisory Trading has reported that Cardiff-based Ceaton Security has been acquired by Senseco Systems, a UK fire protection specialist, in a deal designed to strengthen fire detection services across the UK.

Ceaton Security, which was established in 1991, offers fire detection, security, automation and fire door systems.

The company provides services to both public and private sector clients including the Welsh Government, Great Western Railway and the Welsh Rugby Union.

The acquisition was supported by FRP Corporate Finance.

The team was led by director Thomas Edwards and supported by executive Jade Burgess and associate Twm Westcott.

Fire detection business retains name following acquisition

Ceaton Security will continue operating under its current name alongside the Senseco Systems brand.

The decision is aimed at supporting joint growth while maintaining Ceaton’s existing client relationships.

Senseco will integrate Ceaton’s capabilities into its national operations, which include fire detection, sprinklers, suppression, security, passive fire protection and automation systems.

The acquisition is part of Senseco’s ongoing buy-and-build strategy.

The company is backed by private equity firm Foundation Investment Partners.

FRP Corporate Finance supports trade sale of Ceaton

FRP Corporate Finance was appointed by Ceaton managing director Angie Beasley to explore a trade sale.

The team prepared the business for sale, identified a buyer, led negotiations and managed the project through to completion.

Thomas Edwards, director at FRP Corporate Finance, said: “It’s been a pleasure to have advised Angie on the transaction.

“The business attracted significant market interest, which is not surprising considering the impressive growth that has been achieved since she led a management buyout back in 2022.

“Under Senseco Systems, Ceaton Security can continue to deliver its exceptional, specialised services across Wales and the South West of England.”

Ceaton to maintain client focus under new ownership

Angie Beasley, managing director at Ceaton Security, said the transaction supports the business’s commitment to client service and local relationships.

Beasley said: “Since starting out over 30 years ago, we’ve prided ourselves on providing a high-quality service to our clients, and this deal will allow us to continue to do that with a partner that understands the importance of our longstanding relationships and deep foothold within the local market.

“Senseco is a business with values and a culture like our own, making this deal a good fit for both our clients and employees.

“The support provided by Thomas and the entire team at FRP Corporate Finance was second to none and helped us to achieve a deal with a business that we’re looking forward to working with over the coming years.”

Senseco Systems acquires Ceaton Security to expand fire detection services in Wales: Summary

Ceaton Security, a Cardiff-based fire detection and security services provider, has been acquired by Senseco Systems.

The deal was supported by FRP Corporate Finance.

Ceaton was founded in 1991 and provides services to clients including the Welsh Government and the Welsh Rugby Union.

Senseco Systems operates nationally and is backed by Foundation Investment Partners.

Ceaton will retain its name and operate alongside Senseco.

The acquisition expands Senseco’s UK service lines, which include fire detection, suppression and automation.

FRP Corporate Finance advised Ceaton managing director Angie Beasley on the trade sale and led negotiations through to completion.

MOBOTIX thermal cameras gain extended RIPCI approval for fire detection in Spain

Extended RIPCI approval for MOBOTIX thermal systems in Spain

MOBOTIX has received an expanded “Technical Evaluation of Suitability” (Evaluación Técnica de Idoneidad) from Applus, a certification body recognised by the Spanish Ministry of Industry.

According to MOBOTIX, the approval is part of Spain’s Fire Protection Systems Regulation (Reglamento de Instalaciones de Protección Contra Incendios / RIPCI) and now includes additional hardware beyond the company’s existing certified thermal sensors.

The extension covers new interface boxes — the Mx-4IOA-Box and Mx-NPAA-Box — as well as the full range of M73 Thermal Radiometry (TR) sensors.

New certification supports broader project applications

MOBOTIX stated that the expanded RIPCI certification enables broader use of its systems in large-scale or complex fire protection environments.

Christian Cabirol, CTO of MOBOTIX AG, said: “With this extended certification, we are underlining our innovative strength and our strong position in the Spanish market.”

He added: “Our technology proves its strength precisely where conventional fire alarm systems reach their limits — for example in extensive outdoor areas or large halls.”

System integration and performance confirmed

The certification confirms that MOBOTIX thermal cameras can be integrated with existing fire alarm systems, and that they comply with insurance requirements and building codes.

Each thermal sensor can support up to 20 detection zones, which MOBOTIX said allows for precise configuration to match individual fire risks.

The systems are designed to detect temperature anomalies before visible smoke or flames appear.

Market drivers include regulatory and insurance standards

According to MOBOTIX, increasing regulatory demands and expectations from insurers are contributing to market growth for thermal detection systems.

The company referenced market forecasts predicting global fire protection spending could reach USD 150 billion by 2030.

Thomas Lausten, CEO of MOBOTIX AG, said: “Our certificates and the continuous expansion of our portfolio are proof of our commitment to always being one step ahead.”

He added: “In a fire, every second counts. Our mission is to help our customers protect lives and property — with technologies that are reliable and forward-looking.”

MOBOTIX thermal cameras gain extended RIPCI approval for fire detection in Spain: Summary

MOBOTIX has received expanded certification under Spain’s Fire Protection Systems Regulation (RIPCI), issued by Applus and recognised by the Spanish Ministry of Industry.

The certification covers the company’s new Mx-4IOA-Box, Mx-NPAA-Box, and all M73 Thermal Radiometry sensors.

The RIPCI certification confirms compliance with Spanish fire safety standards and allows integration into existing fire alarm infrastructure.

Each thermal sensor supports up to 20 configurable detection zones.

MOBOTIX stated that the updated approval supports its presence in complex applications such as outdoor areas and large industrial spaces.

The company said that increasing demand for fire detection systems is driven by regulations and insurance requirements, and that the global fire protection market may reach USD 150 billion by 2030.