Manufacturing expansion at E-ONE targets faster aerial truck delivery

by Featured NewsVehicles

E-ONE expands Ocala aerial production

E-ONE has announced a $23.5 million investment in its manufacturing facility in Ocala, Florida, to expand aerial production capacity by 35 percent.

The Terex Corporation-owned company announced the project on 17 March 2026 and said it is intended to reduce lead times for fire departments ordering ladder trucks and aerial firefighting platforms.

Fire departments across North America are facing increasing demand for modern ladder trucks and aerial firefighting platforms for urban and suburban emergency response.

The expansion is expected to increase manufacturing efficiency across the Ocala campus.

Facility work and planned next steps

E-ONE said the project will include expansion of its existing assembly, fabrication and paint facilities, alongside new construction for ladder manufacturing and assembly operations.

Paint operations will double in size to increase throughput and improve quality.

A dedicated ladder manufacturing facility is planned to address current production constraints and support further capacity expansion.

A new facility for aerial body assembly and completion is also planned to increase assembly capability and line rate output within the aerial complex.

Construction of a second test pit at the Ocala campus is intended to remove a single point of failure and improve product flow across all E-ONE product lines.

Mike Virnig, President, Specialty Vehicles segment at Terex Corporation, said: “This investment reflects E-ONE’s unwavering commitment to the firefighting industry.

“Every day of reduced delivery time means people and property are better protected, and that drives our continuous improvement in manufacturing excellence.”

A groundbreaking ceremony is due to be held at E-ONE’s Ocala facility in the next couple of months, with state and local legislators, local fire chiefs, E-ONE fire apparatus dealers and community leaders expected to attend.

Green Bay Metro Fire Department orders two E-ONE platforms

by Featured NewsVehicles

E-ONE, a subsidiary of REV Group Inc., and manufacturer of fire apparatus, has announced it is building two HP 100 Platforms for the Green Bay Metro Fire Department in Wisconsin. The two platforms were ordered through E-ONE Dealer Fire Service Inc.  

These two platforms are replacement vehicles for Green Bay, whose recent orders include two custom pumpers and a Haz-Mat Command Combo Rescue.

Key features of the HP 100 Platforms include:  

  • E-ONE Typhoon® cab with severe duty interior
  • Integral torque box frame with a Cummins 500 HP X12 engine and Allison EVS4000P transmission
  • Criss-cross under-slung outriggers with only 15’-6” spread, automatic levelling and short jack capability
  • Extruded aluminum aerial with 2.5 to 1 structural safety factor
  • Advanced Aerial Control System with color displays featuring mission specific screens
  • Akron StreamMaster II AVM monitor with 2.5” discharge
  • Two 45-degree rear corner staircases
  • Ladder tunnel with 156’ of ground ladders with pike pole storage

Green Bay Metro Fire Department will use the two new platforms to better serve its growing community.

Green Bay Battalion Chief Ray Fuiten said: “I truly believe we are getting the best product and customer service with Fire Service Inc. and E-ONE.  

“It’s exciting to see Green Bay add these two HP 100 Platforms to their fleet,” said Larry Daniels, E-ONE Director of Sales. “We are proud of the continued relationship with Green Bay Metro Fire Department.  Fire Service continues to grow in the Wisconsin market, and E-ONE is excited to be part of that growth.”

E-ONE adds Northwest Fire Services as new dealer in Montana

by Featured NewsVehicles

E-ONE, a subsidiary of REV Group Inc., and a leading manufacturer of fire apparatus, has announced the appointment of Northwest Fire Services as the exclusive E-ONE® dealer for Montana.

Northwest Fire Services is authorised to sell and service the complete portfolio of E-ONE apparatus.

Founded in 2017 in Bigfork, MT, Northwest Fire Services’ mission is to serve those who save and protect lives. With its 4,200 square foot service centre with three bays and two EVT certified technicians, Northwest is the only fire apparatus sales and service dealer in Montana.

Slade House, co-owner of Northwest Fire Services with Mike Flint, commented: “Northwest Fire Services is excited to work with E-ONE and REV Group. As a dealer of E-ONE, we can respond more effectively to our customers with a new range of services.

“This will also provide fire departments throughout the state with a high-quality fire apparatus option, as Northwest Fire Services is the only fire apparatus dealership in Montana that has in-state sales and service – thereby strengthening the ability of our customer to provide high-quality fire protection for their residents.”

Northwest Fire Services also provides:

  • 24-hour technical support
  • Complete fire apparatus parts inventory
  • Pre-inspection of used apparatus
  • High-quality fire equipment
  • Breathing air compressors and SCBA
  • Welding and fabrication and machine shop
  • Comprehensive training
  • Wreck and refurb solutions
  • Plumbing and fire pump overhaul

Larry Daniels, Director of Sales, E-ONE, commented: “We are very committed to growing our presence in Montana. With its dedicated sales and service teams, Northwest Fire Services will provide fire departments with the exceptional products, parts and services needed to help them best serve their communities.”

E-ONE kits out Daytona Beach Fire Department with two Custom Pumpers

by ActiveAmericas - ProjectsProjects

E-ONE, a subsidiary of REV Group and a manufacturer of fire apparatus, has announced the delivery of two E-ONE Custom Pumpers to Daytona Beach Fire Department in Florida. With the recent addition of these two pumpers, Daytona Beach now has an all E-ONE fleet.

Key features of Daytona Beach Fire Department’s E-ONE Custom Pumpers include:

  • Typhoon cab with 12″ vista roof, severe duty interior and dark tint glass
  • Galvanized and powder coated frame for corrosion resistance
  • 188″ wheelbase with 18,000 lb front axle and 27,000 lb rear axle
  • Cummins 450 HP L9 engine with Allison EVS 3000 transmission
  • Extruded aluminum rescue pumper body with full height compartments and ROM roller shutter doors
  • Enclosed ladder tunnel for 24′, 14′ and 10′ ladders and pike poles and pry bar
  • Wide upper roof-top compartments for additional storage space
  • Waterous 1250 GPM pump with 780 gallon tank (750 water / 30 foam)
  • V-MUX electrical system with driver and officer colour displays, integrated A/C controls, integrated tire pressure monitoring and left, right and rear cameras
  • Whelen LED warning and scene lighting
  • AXIS Smart Truck Technology

“These custom pumpers are the newest members of our fleet for a total of six all-matching E-ONE Typhoon pumpers. This provides our crews with the latest and greatest tools that meet NFPA compliance so they can be successful on the fire scene,” said Daytona Beach Fire Chief Dru Driscoll. “We hope to continue our relationship with E-ONE and REV Technical Centre for years to come as our needs continue to grow as Daytona Beach grows.”

“With apparatus built to Daytona’s specific requirements, E-ONE is grateful that the department now has an all E-ONE fleet to serve its community,” said Larry Daniels, E-ONE’s Director of Sales. “We are honoured that Daytona continues to trust E-ONE for all of its fire apparatus needs.”

E-ONE introduces new 2020 CYCLONE® cab with voice recognition

by Americas - Products

E-ONE, a subsidiary of REV Group, has introduced the 2020 Cyclone® cab following feedback from firefighters, which features significant updates and refinements, including more interior space, greater visibility and easier access.

The new 100” wide cab provides more interior space, including a 4” raised roof for more headroom and a generous 27 inches between door and engine cover for both driver and officer.

The Cyclone cab provides excellent visibility for driver and crew with its low-profile dash, one-piece door glass, and a reduced profile interior A/C system.

The new rugged dash, constructed from heavy-duty cast aluminum, features a redesigned centre console area. It is available in both a low profile and a raised design for mounting of sirens, radios, and other electronic equipment. The officer’s side also has a very low-profile designed to provide additional legroom.

Other critical features of this new cab design include:

  • New vertical pull handles on cab doors along with extended lower and full-width intermediate steps
  • High-capacity air conditioning system, closer to the ceiling for greater visibility, with eight vents in rear and six in front.
  • LED strip lights configured as daytime running lights or turn signals, allowing for additional forward warning lights.
  • Heavy wall extrusions and 3/16” plate for the floor, roof, walls, and doors for maximum strength and durability.
  • Five cab length options with a flat roof (low or 4” raised) or one of four raised “vista” designs.

“We’re very excited about this new Cyclone cab. The increased interior space, combined with its rugged construction, and classic styling make the Cyclone cab a perfect choice for fire departments adding to their fleets,” said Joseph Belle, E-ONE Vice President, and General Manager.

www.e-one.com

E-ONE supplies Titan 6×6 ARFF vehicles to Civil Aviation Authority

by Uncategorized

E-ONE, the fire apparatus manufacturer and a subsidiary of REV Group, has delivered several new TITAN 6X6 Aircraft Rescue and Firefighting (ARFF) vehicles to the Civil Aviation Authority of Taiwan R.O.C.

The trucks will be deployed at several airports around the island country, and include the following features:

  • E-ONE unique cab design manufactured from welded aluminum extrusion with 3/16-inch (4.76 mm) plate, exceeding ECE R-29 safety standards
  • Scania 566 Kw (770 HP) Engine delivering 2483 Nm of Gross Torque at 2100 rpm.
  • Hale 11,355 lpm (3,000 gpm) Single Stage Centrifugal Pump
  • 12,000 liter (3170 gallon) water / 1680 liter (445 gallon) Class B foam tank
  • Structural Fire Fighting System driver side pump panel
  • (8) Large Side Compartments w/ 9.0 Cubic Meters (320 Cubic Feet) of useable storage
  • Akron StreamMaster II Dual Flow 6000 lpm (1500 gpm) / 3000 lpm (750 gpm) Roof Turret
  • Akron StreamMaster II Single Flow 1,135 lpm (300 gpm) Bumper Turret

Matt Reda, ARFF product manager for E-ONE, commented: “E-ONE is excited to deliver the new TITAN 6X6 ARFF vehicles to the Civil Aviation Authority. These units are part of an ongoing effort by the Civil Aviation Authority to upgrade and replace the ageing fleet of (27) TITAN vehicles delivered over 20 years ago. With our track record in Taiwan, we are honoured that the Civil Aviation Authority has continued to trust E-ONE and the outstanding after-sales service support provided by our local representative for the critical mission of protecting lives and property.”