The new RED-E Cabinet from TYCO

by Americas - ProductsProducts

The new TYCO® RED-E Cabinet is a pre-assembled, pre-wired, and pretested fire protection valve package enclosed within a free-standing, 14-gauge steel cabinet designed to occupy minimal floor space and provide an enclosure for the fire protection valve riser. The valve package includes the system (manual) shut-off control valve, automatic water control valve, and water-flow/supervisory switches.

The system is also available with an optional built-in air compressor, optional control panel, and back-up batteries for providing electrical alarm, supervisory, and trouble function.

Easy Installation

  • Valve riser has grooved connection to minimize installation time
  • Pre-assembled, pre-tested & pre-wired for plug & play convenience that reduces labour
  • Forklift compatible and industrial grade rollers for mobility

Efficient Maintenance

  • Equipped with magnetic light strips for clear interior visibility
  • Fully hinged removable double-doors provide convenient access to internal parts & extendable compressor stored at the bottom of the cabinet
  • Windows allow for viewing the releasing panel functions & essential system pressure gauges

Trusted Performance

  • Splash resistant drain cup ensures no water spillage during flow testing
  • Features the DV-5A valve with a one-piece diaphragm for simple maintenance & quick external reset

www.tyco-fire.com/

Dependable and specialised: Hannay Reels F7100 hose reel

by Americas - Products

Fighting fires requires dependable and specialised equipment – the F7100 hose reel from Hannay Reels features two swivel joint inlets and two outlet risers that allow the reel to be used for foam and dry chemicals simultaneously.

A reel neatly stores your hose or cable to ensure it’s readily available wherever and whenever it’s needed—no tangles, no leaks, and no problems. In addition, a reel keeps your hose or cable off of the floor to avoid tripping and other workplace accidents that may cause work stoppage or costly insurance issues.

It will also lengthen the life of expensive hose and cable. Constant dragging or kinking can damage hose to the point where it becomes un-useable. Shorts in electric cable or leaks in hose can lead to environmental issues and other problems.

Hannay Reels’ F7100 hose reel features: 

  • Two swivel joint inlets and two outlet risers.
  • All models are available with optional aluminum or stainless steel construction.
  • Gear-driven crank rewind is standard. Choose chain and sprocket drive powered by electric, hydraulic or compressed air motor.
  • Pinion brake standard.
  • Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).
  • Rollers and roller mounting brackets are accessory items. Specify roller position.
  • Standard inlets: 1″ 90° ball bearing swivel joints with 1″ female NPT threads.
  • Standard outlets: 1″ male NST threads (1.375″ x 8 threads per inch).
  • Pressures to 1000 psi (69 bar).
  • Temperatures from -25°F to +250°F (-32°C to+121°C).
  • Consult factory for other sizes and/or threads.
  • Consult factory for other pressures and temperatures.
  • CAUTION: When using Niedner Reeltex® hose, a special riser and/or larger drum diameter is required (consult factory).

www.hannay.com

SAM transforms traditional fire truck pump operations

by Americas - ProductsProductsPumps

SAM manages multiple lines at different pressures and maintains set pressures. It also monitors intake pressure too and switches back to tank if there are any interruptions in the supply lines. After water supply is established, the system automatically refills the tank so it is always full. If there is an issue with the supply lines, SAM will switch back to tank and alert the operator so the issue can be addressed.

SAM will:

  • Maintain set pressure on all active lines
  • Re-fill the tank
  • Monitors intake pressure and switches to tank if intake is lost
  • Keeps the pump cool
  • Alert you if there is a problem with water flow or equipment

The saved presets in the SAM interface allow pump operators to set discharge pressures fast. Even before charging lines, the system automatically opens the tank to pump valve so water is in the pump and it’s ready to go.

With one swipe, SAM:

  • Charges first line to preset pressures
  • Maintains set pressures for each discharge

SAM is an integrated total water control system that manages the truck’s pump, tank, intakes and discharges. The SAM system replaces the pressure governor and takes care of opening and closing valves based on operator settings. Instead of a complex fire truck pump panel, firefighters can have all of the pump controls in a 10″ touch-screen display.

www.samflows.com/

TFT releases new working Fire Nozzle

by Americas - Products

The new TFT Working Fire nozzle reportedly delivers revolutionary performance when you need maximum flows for a “working fire.” For every day use, it is a true 150 gpm @ 75 psi Fixed GPM Nozzle, but when you need even more GPM, the nozzle’s exclusive pressure relief system dramatically limits nozzle reaction.

When you achieve the 150gpm rate, the nozzle flows great, and there is about 65lbs of nozzle reaction force. However, when you need a lot more GPM, that is where the Working Fire excels.

By integrating TFT’s exclusive pressure relief, a 33% increase in flow rates only yields a 33% increase in reaction force. Compare that to a traditional fixed nozzle, which increases 78%. With the Working Fire nozzle, TFT is able to deliver high GPM (200 gpm) with reportedly 30lbs less reaction force than other nozzles.

The Working Fire is available in a break-apart or integrated, stainless steel ball valve configuration. Pistol grips, bail handles, and stream shaper are available in colours and spinning teeth are an option. The nozzle has a rugged, black hard coat finish with a black reflective Scotchlite trim. There is a tactile indicator and detent for straight stream that prevents unintended rotation into other streams.

SoundOff Signal enters fire apparatus market

by Americas - Products

SoundOff Signal, a Hudsonville-based manufacturer of vehicle lighting, control systems and electronic warning solutions for the law enforcement, amber, and government markets, has created its first products for the fire apparatus market with additions to its mpower silicone lights and Lightbar product lines.

“This is truly exciting for SoundOff to offer the fire market our full line of products that improve first responder’s safety. We’ve become known as an innovation and safety advocate leader in the police market, and now, we intend to help protect our fire first responders with that same level of care,” said Mark Litke, president and CEO of SoundOff Signal.

The mpower line of products features an optical-grade silicone lens. In this line expansion, mpower perimeter lights are available in 7×3 and 6×4 configurations. As with the entire mpower light platform, they are designed to be durable, versatile and have brighter light output, as well as a 10-year warranty on the lens material. These lights, along with the 9×7 perimeter light, also will be available in polycarbonate lens for those looking for a more traditional style.

In addition to the perimeter lights, the new nFUSE lightbar is being introduced to the market and offers high light output, numerous configurations and cost-effective options. It will be available in single and dual-stack forms and lengths to fit a small truck up to a full-size apparatus.

“We are inspired by this market — one that so closely echoes our own corporate values of hard work and innovation,” said Drew Radtke, vice president of sales for SoundOff Signal. “We believe SoundOff is really going to strike a chord with these distributors and first responders. We know the fire community is looking for products that push their industry forward in safety, efficiencies and durability, and we are proud of our team for answering this call.”

soundoffsignal.com/

E-ONE introduces new 2020 CYCLONE® cab with voice recognition

by Americas - Products

E-ONE, a subsidiary of REV Group, has introduced the 2020 Cyclone® cab following feedback from firefighters, which features significant updates and refinements, including more interior space, greater visibility and easier access.

The new 100” wide cab provides more interior space, including a 4” raised roof for more headroom and a generous 27 inches between door and engine cover for both driver and officer.

The Cyclone cab provides excellent visibility for driver and crew with its low-profile dash, one-piece door glass, and a reduced profile interior A/C system.

The new rugged dash, constructed from heavy-duty cast aluminum, features a redesigned centre console area. It is available in both a low profile and a raised design for mounting of sirens, radios, and other electronic equipment. The officer’s side also has a very low-profile designed to provide additional legroom.

Other critical features of this new cab design include:

  • New vertical pull handles on cab doors along with extended lower and full-width intermediate steps
  • High-capacity air conditioning system, closer to the ceiling for greater visibility, with eight vents in rear and six in front.
  • LED strip lights configured as daytime running lights or turn signals, allowing for additional forward warning lights.
  • Heavy wall extrusions and 3/16” plate for the floor, roof, walls, and doors for maximum strength and durability.
  • Five cab length options with a flat roof (low or 4” raised) or one of four raised “vista” designs.

“We’re very excited about this new Cyclone cab. The increased interior space, combined with its rugged construction, and classic styling make the Cyclone cab a perfect choice for fire departments adding to their fleets,” said Joseph Belle, E-ONE Vice President, and General Manager.

www.e-one.com

Phenix Technology creates custom firefighting helmet

by Americas - Products

Firefighting equipment manufacturer, Phenix Technology, Inc., has created an exclusive custom TL-2 leather firefighting memorial helmet in honour of the Charleston 9. This helmet was created exclusively for the Charleston Fire Department.

The exclusive helmet features a unique Charleston 9 logo on the rear brim that was created in memory the 9 Charleston firefighters that were lost on June 18, 2007, in the Sofa Super Store Fire. Each helmet created will feature a 3-digit serial number with the very first helmet starting at serial number 010. The first 9 helmets will be dedicated to the Charleston 9 and will be placed inside of a new Charleston fire station that will be built in the near future. These helmets will be exclusively manufactured for Charleston firefighters.

“Phenix Technology, Inc. was honoured to have been asked to create this helmet. It will serve as a constant vigil for those who were lost and as a symbol of remembrance for the amazing men and women of the City of Charleston Fire Department. May we never forget our brothers, and may their families find peace knowing how deeply each of them were loved and how much they are missed today,” said Angel Sanchez, Jr, Director of Global Operations for Phenix Technology, Inc. This helmet is now available exclusively to City of Charleston firefighters.

phenixfirehelmets.com/

Sea-Fire launches new MN-Series NOVEC 1230 fire suppression system

by Americas - ProductsFire SuppressionProducts

Sea-Fire Marine has introduced the first US Coast Guard-approved 3M™ Novec™ 1230 engineered fire suppression system available at 725 psi (50 bar). The new fully customisable MN-Series provides greater flexibility when designing or retrofitting a vessel’s fire suppression system and is ideal for commercial or recreational vessels up to 300′.

The primary benefit of the Sea-Fire MN-Series is the ability to employ the system into almost any vessel layout. The increased psi allows for longer pipe runs, meaning the tanks can be located away from the protected space and still provide for multi-zone applications. The cylinders themselves are 10″ or 16″ in diameter for a reduced footprint and the ability to fit through standard manholes.

According to the manufacturer, the seamless and welded cylinders are powder coated for corrosion resistance and have an integrated valve protection cap for shipping and servicing. They are refillable and meet US DOT, TC, TPED, UN and dual specification options.

Adding to the MN-Series’ versatility is its actuators. Electric solenoid, pneumatic and manual/pneumatic/cable versions are available to meet any application requirement.

As an engineered solution, the MN-Series is configured for the specific vessel and they are tested and approved in accordance with IMO/SOLAS requirements. In addition to USCG, the system additionally carries type approvals from ABS and FM Global.

Novec 1230 has a negligible global warming potential – electrically non-conductive and non-corrosive, it’s safe for human exposure without any reduction in fire extinguishing capabilities.

www.sea-fire.com/

Johnson Controls launched TYCO pressure control valves for fire protection systems

by Americas - Products

Johnson Controls announces the launch of two new TYCO® pressure control valves for fire protection systems: the TYCO® Model RV-1A Pressure Relief Valve and the TYCO® Model PRV-1A Pressure Reducing Valve. The new valves offer simple, low-maintenance solutions for controlling and maintaining optimal water pressure within commercial fire protection systems.

The TYCO® RV-1A Pressure Relief Valve automatically relieves excess pressure in fire protection systems to maintain a relatively constant system pressure as flow demands change. Its simple design eliminates the need for users to bleed trapped air from the diaphragm chamber. The valve offers users a nominal relief “set pressure” range of 30 to 250 psi (2.1 to 17.2 bar).

The TYCO® PRV-1A Pressure Reducing Valve reduces a higher inlet pressure to a lower outlet delivery pressure in water-filled pipes. It automatically maintains the outlet “set pressure” (static and residual) within a close range, regardless of fluctuations in the higher-pressure inlet line or varying flow rates.

“We developed both valves using the same diaphragm design as the TYCO® DV-5A deluge valve, said Gijsbert van Rooijen, global product manager, Johnson Controls. “With a simple trim configuration and just one moving part, just like the DV-5A, these new valves provide optimal pressure control with minimal maintenance and dependable, consistent operation over time.”

The RV-1A and PRV-1A valves are UL and ULc Listed and FM Approved. Both valves are factory assembled and fully trimmed. They are available in sizes ranging from two inches to eight inches, with flange-by-flange and grooved-by-grooved end connection options.

www.tyco-fire.com

Streamlight launches PolyTac® 90X USB

by Americas - ProductsProducts

Streamlight Inc. have launched the PolyTac® 90X USB, a multi-fuel, right-angle personal light that delivers 500 lumens and uses a Streamlight SL B-26™ protected USB rechargeable Li-Ion battery pack. A PolyTac® 90X with two CR123A batteries is also available.

The PolyTac® 90X USB is a complete rechargeable system that includes a Streamlight SL-B26™ rechargeable battery with integrated micro-USB port. The light can also accept two 3-Volt CR123A disposable lithium batteries. This multi-fuel capability enables users to charge the light on the go or insert cell batteries when a charging source is unavailable.

“The PolyTac® family of lights is among our most popular with fire and rescue personnel because of their extreme brightness, compact size and exceptional durability,” said Streamlight Vice President, Sales and Marketing, Michael F. Dineen. “This newest addition features a 90° head, multiple attachment methods and multi-fuel battery technology, giving users the ability to power and recharge the light through convenient USB recharging or via disposable batteries. Whether conducting rescue operations, investigating fire scenes or signalling others during emergencies, it’s ideal for first responders.”

The new light includes an integrated carabiner style D-ring clip for a variety of attachment methods and a multi-position, reversible pocket clip that attaches to MOLLE, turnout gear, harnesses and a variety of mounting positions. It is also available with a Gear Keeper® retractor for attachment to gear, clothing or equipment. The Gear Keeper® system features a high-strength nylon tether with a 36” extension and 6 oz. of retraction force.

The PolyTac® 90X USB features the latest in power LED technology for extreme brightness. When using the SL-B26™ USB Li-Ion battery pack, it delivers 500 lumens and runs for 3 hours and 45 minutes on high. It also provides 500 lumens and a run time of two hours and 30 minutes on the high setting when using CR123A batteries. A battery indicator built into the on/off button flashes red when battery recharging or replacement is needed.

Featuring a multi-function, head-mounted push button switch that is reportedly easy to operate with gloved hands, the light is made from high-impact, super-tough nylon polymer with textured grip. The light features an IPX7-rated design that makes it waterproof to one metre for 30 minutes and it is impact-resistant tested to two metres.