Odisha Fire Service to carry out audit after Delhi blaze

Odisha Fire Service has directed all units to carry out a fire safety audit in all important state establishments by 21 May following a fire at a four-storey commercial building in Dehli which resulted in the death of at least 27 people and injured several more.

On Saturday (14 May) DG Fire Service Santosh Kumar Upadhyay directed all units to carry out fire safety audits in hotels, lodgings, guest houses, and educational buildings of more than 12 metres in height or having built-up area over 1,000 square metres, as well as cinema halls, multiplexes and apartment complexes.

Fire service officers have also been asked to carry out safety audits at clinical establishments above taller than metres or having more than three floors, and business or office buildings larger than 12 metres in built up areas of more than 500 square metres.

Officers have been directed to make sure that different establishments display the fire safety certificate on all their floors.

Upadhyay said: “Assistant fire officers in districts, deputy fire officers of all circles and range fire officers have been asked to strictly enforce the guidelines as per the Odisha Fire Prevention and Fire Safety Rules to avoid any untoward incident.”

Report highlights failings of fire prevention mechanism in Greece

A new report by WWF Greece points to a series of failings in the management of wildfire prevention funds and the need for better oversight. Last year’s devastating fire season in the Mediterranean country has concluded.

According to the study by the wildlife conservation group covering the five-year period from 2016 to 2020, Greek authorities spent 778 million euros putting out wildfires as opposed to just 189 million euros on forest management and fire prevention measures. In terms of percentages, this means that authorities used more than 80% of their resources fighting fires and less than 20% preventing them.

It also found that just under 50% of funding available for fire prevention at the local level via the EU’s National Strategic Reference Framework (ESPA in Greek) was absorbed during that period, as well as evidence of poor reporting on how funding was used. 

WWF also noted the absence of a centralized mechanism that is responsible for overseeing firefighting funds and tracking how they are spent, as an annual assessment of how each fire season was managed.

“We do not have an exact estimate at the national level of the resources poured into prevention and fire-fighting and this obviously creates problems in planning and in evaluating the system,” said Elias Tziritis, from WWF’s Nature Policy Department.

The report also noted that in the past 20 years, the number of staff employed in the Forestry Service has dropped by 53%, while funding to the agency has plummeted by 80%.

“The fires of the past few years showed us the limitations and failures of the fire-fighting mechanism and also demonstrated the importance of prevention,” said Panayiota Marangou, who is responsible for WWF’s environmental protection programs.

Greener and smarter: Hochiki to hone in on the future of fire detection at FIREX

Hochiki Europe will be exhibiting at FIREX International next week which will take place from the 17-19 May. The team are excited to be back at live events, meeting customers and readers of IFSJ face to face.  

On the Hochiki stand, FI 1640, there will be live demonstrations of a range of Hochiki’s life safety products, as well as discussions on what the future holds for the fire industry, greener product design and customer insight.

Hochiki’s Sales Director, Nathan Hudson said, “I am looking forward to hearing what visitors think of the life safety technology we are bringing to the show, especially our FIREscape+, L@titude and Ekho ranges. I think this year’s event, for many reasons, really will be the best yet.”

Sophisticated design combined with powerful customer insight

The Hochiki Europe team of experts will be on hand to demo the new and improved L@titude system. With huge investments made in the research and development of this product, led by customer insight, this latest model combines the very latest in hardware and software and is the company’s control and indication system.

It is set up to operate anywhere in the world, in multiple languages, across all manner of applications – from schools, hospitals and city skyscrapers to commercial spaces, travel ports, and logistics hubs. The system has been designed to be simple to configure and easy to use, utilising touchscreen technology with a graphical user interface to help display vital information. It is EN approved and recently DBI certified for the Danish market following its EN54 Part 13 BRE approval.

Greener life safety products

For visitors looking to improve their energy consumption, the Hochiki team will be providing live demonstrations of the power saving and environmentally friendly FIREscape+ combined emergency lighting and fire detection system.

The system features LED downlighters consuming only 0.1W once fully charged, the lower energy consumption directly correlates with lower CO2e emissions; providing building owners with a greener and more cost-effective solution.

Visitors to the Hochiki stand, FI 1640, can also learn how Hochiki are helping to protect and keep operational one of the UK’s largest offshore windfarms at Margate, critical as thoughts turn to how the UK can produce cleaner energy and increase its energy independence.

A new generation of Hybrid Wireless Fire Detection

Hochiki’s next generation of hybrid wireless fire detection products, Ekho is also available for demonstration.  At the core of the system is the wireless Translator module, hard-wired to the fire alarm control panel loop and communicates continuously with the wireless devices. Wireless Expander modules are then used to extend the self-healing radio mesh network, increasing the reach and capacity of the overall system.

To find out more visit Hochiki at FIREX – head to stand FI 1640 and speak to Hochiki’s team of experts. Or for more information visit hochikieurope.com/events

IRDAI allows insurers to design alternative products to cover fire, other perils

India’s Insurance Regulatory and Development Authority of India (IRDAI) has permitted general insurers to design alternative products to cover risk from fire and allied perils for dwellings and small businesses.

The IRDAI issued guidelines for standard products for fire and allied perils for dwellings, micro and small businesses (Bharat Griha Raksha, Bharat Sookshma Udyam Suraksha and Bharat Laghu Udyam Suraksha) in January 2021.

These standard products replaced the Standard Fire and Special Perils (SFSP) policy for the named risks and no product other than the standard products was permitted for fire and allied risks.

“After considering the increasing demand for new covers in the fire line of business, the Authority. hereby permits general insurers to design and file alternative products covering fire and allied perils for the risks (de-notified earlier,” IRDAI said in a circular.

Such alternative products, it added, may be variations of the standard product and may include already approved add-ons as part of the base product or may delete an existing provision.

“However, the definitions and wordings of terms used in the standard product shall be the reference point for those terms when used in the alternative products as well. Needless to add, the pricing of the products shall be commensurate to the risks involved,” it said. One of the objectives of permitting alternative products is to insure evolving fire insurance risks of Dwellings, Micro and Small Businesses to increase insurance penetration.

It also aims to identify protection gaps in the existing fire insurance products and address the changing needs of market with due consideration to the policyholders’ interests in terms of suitability and affordability.

Another objective is to promote healthy and sustainable development of fire insurance market with new and alternative products that provides wide options to policyholders in addition to standard products, IRDAI said.

The latest directives will come in force on June 1, 2022. In another circular, the regulator said it has been receiving several complaints from policyholders, both directly and through various platforms such as industry associations, that insurers are referring to the Burning Cost as a ‘mandated minimum rate’.

It said that the Insurance Information Bureau of India has been periodically publishing the industry Burning Cost for Fire perils (FLEXA). All insurers, it said, have been informed that the purpose of this is to give an indication to insurers of the industry Burning Cost for various occupancies, for appropriate use in the matter of pricing the various risks.

IRDAI said the objective of IIBI publishing details of Burning Costs occupancy-wise is only to give information to insurers with regard to industry-level experience for appropriate use while rating risks.

“By no means does this even remotely imply that this is a ‘mandated minimum rate’,” it said. The regulator further said that it is expected of insurers to consider all applicable risk factors for rating a risk and give appropriate discounts or charge loading as warranted.

It is reiterated that insurers shall ensure that policyholders are not misinformed that the Burning Cost is a ‘mandated minimum rate’ for insurers to charge, IRDAI said.

Regional focus: Watershed moment in the UK fire market

In the past month major new changes and fire protection laws have come into effect across Great Britain, IFSJ shines the light on the UK in our market focus for May 2022

The UK has one of the most advanced fire protection markets in the world, despite legislation only catching up now in critical areas. According to FPA managing director Jonathan O’Neill the ingenuity and innovation of various stakeholders, manufacturers, fire training professionals, consultants, and the fire services themselves has contributed to a thriving fire protection and detection market across the UK.  

The United Kingdom government spent approximately 3.13 billion British pounds on fire-protection services in 2020-2021, the highest amount spent since 2010/11 when the government spent 3.02 billion pounds. 

More statistics 

Since the late 90s various government efforts, resulting in orders, bills, and acts have come into effect to protect assets. But more importantly, painstaking efforts have been taken to minimise fatalities. Plenty of movement has taken place in the last five years, in the aftermath of the horrific Grenfell Tower disaster. The incident is considered as one of the UK’s worst modern disasters. As many as 72 people died in the disaster that took plan on June 14, 2017, which made up a staggering 18% of all deaths caused by fires in the UK that year. In 2019-2020 fatalities caused by fire accidents dipped below the 300 figures for the first time in several decades.  

There were 311 fire-related fatalities in Great Britain during 20120/21, 22 more than occurred in the previous reporting year when there were 289. In the early 2000s, the annual number of fire fatalities was consistently over 500, with numbers gradually falling throughout that decade. In 2011/12 the number of fatalities related to fire fell below 400 for the first time, and has remained below 400 since that point. 

Although there has been a net decrease in the number of incidents attended by fire and rescue services in the United Kingdom since 2010/11 the current trend from 2014/15 onwards has been one of increase. In 2018/19 there were over half a million incidents attended in England, over 92,000 in Scotland and almost 37,000 in Wales. Northern Ireland had the least number of incidents attended at around 24,600. 

Since peaking at over 55,600 workers in 2010 there has been a marked decline in the number of fire and rescue workers in England, with the service losing more than 10,000 workers by 2019. In a similar time period, the expenditure on fire-protection services in the United Kingdom fell from 3.1 billion in 2009/10, to around 3 billion in 2019/20. 

Building Safety Bill 

At the end of April 2022, the UK Government’s Building Safety Bill completed all the parliamentary stages in both houses, ready to receive Royal Assent. The 252-page bill, which began the process of going through the houses of parliament in July 2021, is aimed at improving building standards, ensuring the safety of residents, and protecting leaseholders from the costs of fixing their blocks.   

The Building Safety Bill’s main aims is to reform the safety system for properties higher than 11 metres by appointing a Building Safety Regulator, giving a greater voice to residents, driving industry change, and creating a national framework for increased oversight.  

London,,Uk.,28th,June,2017.,Editorial,-,The,Grenfell,Tower

UK Minister for Building Safety Stephen Greenhalgh has branded the Building Safety Bill as the “biggest changes in building safety legislation in our history”. The act will now also include measures to ensure leaseholders avoid footing the bill for remediation costs, known as ‘waterfall’ protections. 

Ministers have faced growing pressure over the building safety crisis. Thousands of leaseholders have been hit with crippling costs for fixing their buildings and have been unable to sell their flats. 

The Royal Institute of Chartered Surveyors (RICS) welcomed the passing of the bill as a ‘positive step’ and acknowledged that it “may not have been what everyone hoped for”. The bill will at the least provide greater protections for leaseholders and delivering a new building safety regime. 

“It is critical for RICS and other organisations representing the professions impacted by the Act, to have the opportunity to offer their continued support in finding and shaping the solutions alongside government,” it explained. 

According to law firm Clyde and Co, major changes to the Bill include scrapping building safety managers or the need to appoint one. There is now an “accountable person” who takes over day-to-day responsibility for higher risk buildings over 18 metres. 

Another amendment that has been enshrined into law is extending the limitation period to 15 years for defective premises claims and 30 years for retrospective claims. The law firm said that this could come into force two months after royal assent. 

Sadly, new builds or restored properties opting to use environmentally sustainable materials remain at greater fire risk. Expressing his concern on the matter O’Neill says: “there’s no way to escape the influx of sustainable, albeit combustible, building materials making a mark in our cities and towns. We need a unified code on buildings in the UK that incorporates evolving building techniques and materials.” 

The ripples of the Grenfell disaster, and the impact of its subsequent inquiry, have left its mark across Britain’s devolved governments. Since October 2006 the fire safety law in Scotland has differed from that of England and Wales and Northern Ireland. Last month, a legislation by ministers in Scotland proposed ban on use of combustible materials on high-rise buildings. 

Since 2005, cladding used on high-rise blocks in Scotland had to feature non-combustible materials or pass a large-scale fire test. The new building standards legislation removes the option of a fire test, completely prohibiting such materials in buildings with floors above 11 metres. 

The law on fire alarms has changed in Scotland, requiring all homes to have interlinked alarms. Interlinked means if one goes off, they all go off, so you will always hear an alarm wherever you are in your home. The new law has come about because of the Grenfell fire in London in 2017, and it applies to all Scottish homes. It is the property owner’s responsibility for meeting the new standard. Could we see a similar move coming into effect across the rest of the UK? Watch this space.  

Accountability in the amendment 

But the amendment to the Building Safety Bill, which removes the requirement for landlords to appoint Building Safety Managers in leasehold buildings seven storeys and over, is being challenged by a leading tall buildings fire safety expert. 

Russ Timpson – a former firefighter and Managing Director of the Tall Buildings Fire Safety Network -is urging the government to reconsider its decision to scrap the recommendation first proposed by Dame Judith Hackitt in the wake of the Grenfell Tower fire. 

“This latest iteration of the all-important Building Safety Bill states that responsibility for fire safety will now fall squarely on the squarely on the shoulders of an ‘Accountable Person’, such as the freeholder or head lessee or a management company. It is fundamentally important that anyone who is put in charge of tall building fire safety has undergone specialist training, which is backed up by a recognised qualification.” 

A similar concern has been raised by several experts and veterans of UK fire safety protection. A logical solution to this conundrum, according to the FPA, is the appointment of independent assessors. It’s a case of assessing the assessor, where there is a constant loop of checks and balances put in place to ensure there are strong grounds of accountability at all times from all parties. 

The 5-billion-pound change 

In a significant intervention in January 2022, UK housing secretary Michael Gove announced plans to get developers and construction product manufacturers to pay for defective buildings through a multi billion-pound billion levy. In April 2022, following months of negotiations, 35 builders pledged to fix all buildings they had built in the past 30 years that have “life-critical fire safety defects”.  

The agreement includes buildings they have developed on behalf of social landlords as part of Section 106 agreements. Leaseholders will also be able to launch retrospective legal action going back 30 years against developers or contractors that have built unsafe properties. 

The 35 developers collectively agreed to contribute £2bn towards fixing buildings they had a role in constructing. Under the Gove plan, in addition to the £2bn from developers to fix their own buildings, the industry will commit a further £3bn for the removal of unsafe cladding through an expansion of the building safety levy, a charge on new residential buildings. Firms refusing to contribute to the fund set up to fix dangerous cladding will be warned they could be blocked from selling new homes. 

GFCI wins NFPA’s Philip J. DiNenno Prize for 2022

The National Fire Protection Association (NFPA) has announced Electrical Shock Hazard Protection by Ground Fault Circuit Interrupter (GFCI) Protection as the winner of the 2022 Phillip J. DiNenno Prize, which recognizes pioneering innovations that have significantly impacted building, fire, and electrical safety. The prestigious award is named for the late Philip J. DiNenno, the greatly respected former CEO of Hughes Associates, in recognition of his extraordinary contributions to fire safety.

The 2022 DiNenno Prize selection reflects a departure from the traditional recognition of one or more individuals who have played a pivotal role in the creation of a fire and life safety technology. Instead, it honors the ground-breaking technology itself, as its innovators are no longer living.

The (GFCI) concept has evolved since its inception in the 1940s into a series of sophisticated protection devices that have increased protection of people from electric shock. It has also allowed for greater degrees of safe electrical power usage among numerous applications in all types of environments. In addition, widespread installation of GFCI protection throughout the built environment has directly led to significant, quantifiable increases in society’s current levels of electrical safety. Furthermore, GFCI technologies will continue to prevent tragedies attributable to electrocutions even more so in the future.

“GFCI technology in itself is very important in electrical safety, saving hundreds of lives per year,” said Craig Beyler, DiNenno Selection and Prize Committee Chair. “This year’s recommendation remains true to the core tenets of the DiNenno Prize and continues to honor live and deceased innovators equally.”

The DiNenno Prize typically features a $50,000 award to its recipients. In absence of living recipients, the Phoenix Burn Society for Burn Survivors and the Electrical Fire Safety International (ESFI) have been selected as the beneficiaries of the prize and will each receive a cash donation to support their work in reducing loss from electrical hazards.

The award will be officially presented at the NFPA “Stars at Night” award ceremony in coordination with the NFPA Conference & Expo (C&E) in Boston this June. Jack Wells and Henry Zylstra, who each played a critical role in the advancement of GFCI technology, will serve as legacy presenters of the DiNenno Prize.

In addition, there will be a special panel presentation on Ground Fault Circuit (GFCI) Protection at C&E on Monday morning at 8:00 am. Wells, Zylstra, Alan Manche and Steve Rood will serve as presenters, reviewing the role GFCI has played in electrical safety; Wells and Zylstra will share stories about their involvement in the development and commercialization of GFCI technology.

Fire headlines upcoming changes to Welsh FFHH act

The Fitness for Human Habitation (Wales) Act comes into effect on 15 July this year (effective to all landlords, social and private).

The act identifies 29 hazards within the property where landlords need to meet minimum requirements.
The FFHH act requires a smoke alarm, in proper working order, to be present on every storey of a dwelling.

Landlords must ensure that each of these alarms are in proper working order and interlinked with all other smoke alarms connected to the electricity supply.

Landlords may consider it appropriate to install more that one smoke alarm on each store along with a heat alarm in the Kitchen, these additional alarms could be mains or battery powered. Any additional battery-powered alarms do not need to be interconnected (Although, BS 5839-6 recommends interconnecting all alarms within the dwelling).

The act signposts landlords to BS 5839-6 for recommended guidance on the installation of alarms
A Carbon Monoxide alarm should be installed in all rooms containing a fuel-burning appliance (including cookers).

CO alarm can be mains or battery-powered and must comply with BS EN 50291. Siting should be carefully considered noting the expiry date of the alarm.

Experts talk fire protection DNA of a building

Erik Boyter, CEO, WindowMaster and Ian King COO Zeroignition explore importance of a robust fire protection built into the DNA of every building

Smoke control systems should be built, certified and delivered in a way that building owners and occupiers can depend on. 

It’s vitally important to recognise that only certified components of the system should be used. For example, smoke panels proven, factory built and certified to the relevant parts of EN12101 and other relevant standards like ISO21927-9. 

A factory-based quality system or factory production control, audited by a notified body, should be used to certify components of factory-built products.  

Consistency is key. Systematic checks of components, arrangement, fabrication and build in a controlled environment is the only appropriate route to prevent any variations in build from what has been tested and allowed to be certified. This helps ensure dependability as designed, and will enable the supplier to produce a product specific declaration of performance at point of manufacture. 

System install and commissioning should be conducted and completed by an appropriate party qualified and competent to do so. This might be demonstrated through voluntary certification such as the SDI 19 scheme. 

Finally, the building owner or manager is responsible for ensuring that the system remains compliant through a systematic approach to testing and maintenance. 

It cannot be emphasised enough for life safety systems: compliant systems must exist and be documented throughout the design, manufacture and delivery process, as well as through the life of the building. 

We’ve looked at smoke control systems, but of course fire safety also encompasses general building materials. While it is important to understand and use FR products in all building specification, it is also crucial we consider the wider system. Ian King, COO, Zeroignition, takes us through the importance of a systematic approach to fire safety. 

The Grenfell tragedy was a catalyst for change in the construction industry. It marked the realisation that much more needs to be done to ensure the buildings we live in are properly equipped to protect occupants from the risk of fire and that safety must be put first, above all else. 

As the Building Safety Bill continues to make its way through Parliament, albeit slowly, discussions around cladding continue to dominate headlines pushing fire safety even higher on the priorities list. Yet as we’ve seen, the pace of the bill has re-affirmed how notoriously complex fire safety compliance is in the UK. 

In reality, we must remember the Bill will be unlikely to eradicate some of the wider issues that the industry struggles with, namely, cost and more recently the availability of materials. Add to this the lack of construction product testing facilities, which are key to the ‘levelling up’ of standards and quality. The Local Government Association (LGA) is one example, encouraging more reliable testing systems that are also more user friendly. It also wants to see businesses caught selling products that aren’t fit for market, held accountable. “The new regulator must have real powers and sanctions and the regulatory system must be properly funded,” says the organisation. “Trading Standards authorities have found themselves caught between costly and complex arguments between test labs about the correct approach to testing, with no way to resolve them.” 

At Zeroignition, we agree with this sentiment. Since our founding, Zeroignition has been keen to see a vast improvement in accurate labelling by product manufacturers, ensuring that any information provided is easy to understand and identify, so that materials specified to construct buildings are what they say they are. Without this clear guidance, change will never materialise and people and properties will remain inadequately protected from fire. 

Disrupting traditions  

There’s no denying, construction projects are incredibly complex and involve a myriad of decisions. Every specification choice has a knock-on effect to the wider build, and unforeseen results can easily arise when a systematic approach to fire protection isn’t maintained.  

Although it’s widely agreed by industry professionals that a methodical approach is the key to quality, there’s clearly some scepticism as to how to achieve this. Manufacturers, specifiers and architectural bodies must do more to ensure best practice is fully established and abided by, on every single project, without fail. 

Beyond this, the construction industry should look to other industries for guidance, such as automotive and aviation, where a checklist approach reduces the risk of harm to passengers. It’s no longer good enough to work from memory or from a notepad and pen. Digital record keeping is now necessary to ensure certain fire planning elements aren’t being missed. 

Beyond this, we need to look to the latest in communications theory and decision making to ensure that fire communications are presented in a way that sticks, and use ‘nudge theory’ to ensure that it’s easier to do the right thing.  

Investing in robust knowledge  

We know that in-depth knowledge surrounding product safety standards is essential for architecture, specification and construction professionals. Those working in the industry must be sure they have the knowledge and understanding of fire safety when specifying building projects.  

It’s an area we investigated for ourselves, post-Grenfell, and the results reveal just how serious knowledge gaps around fire safety remain in the industry. The survey was conducted across the UK, Germany and France and of those questioned, just 3% of architects were able to correctly define the four basic fire protection terms: active fire protection, passive fire protection, fire resistance and reaction to fire.  

A mere 2% of the architects interviewed said they’d received comprehensive fire protection training. While most agreed they had had some sort of training, less than one in ten (8%) said they’ve never had fire protection training. These findings reveal an urgent need for serious upskilling to ensure those building liveable structures are well informed and up to speed on the essential fire safety requirements and protocols.  

A third of architects who participated in the study also revealed that their current employer doesn’t spend enough on fire protection training, and it seems since the outbreak of COVID-19 particularly, many have taken matters into their own hands. NBS (formerly National Building Specification) says it saw a marked increase in webinar attendance, as more people were working remotely and had the time to attend digital webinars and seminars without having to build time into their day to travel to and from the training venue. Online webinars covered a variety of different topics including fire safety, and were attended by product manufacturers, as well as architects and specifiers. 

Positive change  

The digital ‘revolution’ of the construction industry is also enforcing positive change. ‘Digital footprints’ which explicitly show that work has been carried out to the appropriate standard are now essential. A further take up of this approach will no doubt help to implement watertight fire safety checks before a building is handed over to the occupant or end user. 

Discussions had with manufacturers we work with, have also shown first-hand how an increased focus on R&D projects is now taking place. Advancements in innovative materials that help boost fire safety are now coming to market for added protection on new and existing building projects.  

Given what we’ve seen, fire protection now needs to be given the attention it deserves and a uniformed, robust framework needs to be set in place to make sure consistency is achieved across the sector. Increased levels of third-party testing is another area that needs to improve and a greater understand of how components work in tandem will be a key element in improving fire safety within construction. 

Manufacturers also have a role to play. Specifiers need to have complete confidence in the products they are recommending which means product information must be up to date and accurate. Until we address the focus on quality vs cost, we’ll never achieve construction’s primary role: ensuring its occupants remain safe.   

Fire protection supplier Ardent enters partnership with Leeds Beckett University

Fire protection manufacturer Ardent has entered a partnership with North Yorkshire-based Ardent to help boost its management capabilities and develop strategies to break into new international markets.

The team of academics, all based within Leeds Business School, will work with Ardent on the Management Knowledge Transfer Partnership (mKTP) project, that’s funded in part by the UK government through Innovate UK.

Ardent is a supplier of fire protection and electronic safety systems for people and businesses using plant, public transport, and specialised vehicles – in the UK and overseas.

The project will run for 30 months and focus on building long-term marketing and internationalisation strategies for Ardent as it continues to grow.

The mKTP’s goal is to embed permanent transformations in leadership, management, and culture across the business.

Dr Catherine Ashworth, senior lecturer in strategic marketing at Leeds Beckett, is leading the partnership.

She said: “Through our new partnership we aim to create strategic growth within Ardent. We will do this by embedding new management capabilities across the value chain – and a new leadership model across the organisation.

“We will also focus on improving Ardent’s capabilities in gathering expert market intelligence, strategically assessing overseas market opportunities, developing internal and stakeholder communications, and by delivering strategic decision-making.”

Neil Crowther, managing director of Ardent, said: “Since our founding in 1993, we have always aimed to continually improve our offering and service. We always prioritise challenging ourselves and encourage collaboration across the company. This partnership is a natural fit for us and we look forward to it being a productive relationship that will help us provide even better service to all our customers around the world.”

South Williamsport Fire Department fire deal considered ‘revolutionary’

Officials involved in a proposed five-year cooperative agreement with Loyalsock Township and its fire department have labeled it as ‘revolutionary’ and one that could incorporate future municipal partners to provide fire and rescue services for their communities.

South Williamsport Borough Council in Pennsylvania approved the proposal earlier this week and township supervisors continue to review it as minor revisions get ironed out.

The agreement, a copy of which was provided to the Sun-Gazette, includes provisions for paid fire protection and rescue services that funds the departments and apparatus and equipment through existing fire taxes.

Under the banner of Susquehanna Mutual Aid Regional Team, or SMART, the dwindling manpower of the South Williamsport Volunteer Fire Department was given new legs this week.

The cooperative fire agreement, meanwhile, creates a legal mechanism to provide sufficient funding to the participating fire companies from participating municipalities and other third party sources, he said.

SMART will begin with an initial paid staff of five fully trained firefighters and rescue responders consisting of four full-time, 40-hour-per-week positions, Monday through Friday, with one shared administrative position providing the administrative oversight for the services administered under the SMART program, according to the terms, the SunGazette reported.

The four full-time positions will be assigned into two separate firefighter crews, with one crew to be stationed at Loyalsock Township, and with one crew to be stationed at South Williamsport Volunteer Fire Department.

The agreement provides necessary personnel, training, and equipment required to supplement the participating fire companies with paid firefighters that will provide for adequate paid fire protection and rescue services within the participating municipalities.