Johnson Controls expands GRINNELL one-bolt coupling portfolio

by Products

Johnson Controls is expanding its GRINNELL G-Fire One-Bolt coupling product line by adding two new sizes: 1.25 and 1.5 inches. The new, smaller couplings will reportedly allow contractors to perform quicker installations on smaller diameter piping and in tight spaces. As part of the One-Bolt family, both couplings feature the unique, single-bolt design that eliminates alternate tightening while resulting in more consistent installations and dependable product performance.

“First launched in 2018, our GRINNELL One-Bolt coupling product line now offers more choices for contractors working on a wide variety of projects, from storage facilities to standard commercial projects,” said Dave Nelligan, global product manager at Johnson Controls. “By adding these two new sizes, our customers can now have a complete range of One-Bolt couplings where speed matters most.”

The One-Bolt couplings allow fast and easy push-on installation thanks to a pre-lubricated gasket and pre-assembled design. The couplings can be used in both vertical and horizontal applications across wet, dry and freezer systems. They feature 360-degree contact for an exceptionally rigid joint and a grooved, rigid coupling design to make joining pipe faster and easier.

A low-profile spine allows for installation in tighter spaces and a centre-stop gasket ensures proper positioning on pipe. The couplings are UL/ULC Listed and FM Approved, with a pressure rating of up to 365 psi.

www.johnsoncontrols.com/

Euralarm releases guide on periodic testing in fixed firefighting systems

by PassiveProducts

Euralarm has published a guidance document on the important aspects relating to the periodic inspection of cylinders used in fixed gaseous fire extinguishing systems and especially in respect to hydrostatic testing. The guidance note is intended to identify some critical areas that are often not fully understood and does not prescribe the full processes involved in the testing or the physical handling of the cylinders.

Transportable cylinders under the TPED (Transportable Pressure Equipment Directive) and ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) are required to go through periodic testing for re-certification. The new Euralarm document addresses the issues related to the importance of procedures for periodic testing and subsequent refilling the cylinders.

The document guides the reader to avoid serious safety issues of hydrostatic testing. The guidance note is meant for the testing of gas cylinders of seamless steel, seamless aluminium alloy and welded carbon steel according to respectively EN 1968:2002, EN 1802:2002 and EN 1803:2002.

Aspects that are covered in the guidance note are moisture control, the reuse of cylinder valves and the recertification of cylinders. A useful checklist is part of the document. The checklist covers important steps to ensure that the safety of cylinders is maintained during periodic inspection processes and during the filling afterwards.

www.euralarm.org/

Sea-Fire launches new MN-Series NOVEC 1230 fire suppression system

by Americas - ProductsFire SuppressionProducts

Sea-Fire Marine has introduced the first US Coast Guard-approved 3M™ Novec™ 1230 engineered fire suppression system available at 725 psi (50 bar). The new fully customisable MN-Series provides greater flexibility when designing or retrofitting a vessel’s fire suppression system and is ideal for commercial or recreational vessels up to 300′.

The primary benefit of the Sea-Fire MN-Series is the ability to employ the system into almost any vessel layout. The increased psi allows for longer pipe runs, meaning the tanks can be located away from the protected space and still provide for multi-zone applications. The cylinders themselves are 10″ or 16″ in diameter for a reduced footprint and the ability to fit through standard manholes.

According to the manufacturer, the seamless and welded cylinders are powder coated for corrosion resistance and have an integrated valve protection cap for shipping and servicing. They are refillable and meet US DOT, TC, TPED, UN and dual specification options.

Adding to the MN-Series’ versatility is its actuators. Electric solenoid, pneumatic and manual/pneumatic/cable versions are available to meet any application requirement.

As an engineered solution, the MN-Series is configured for the specific vessel and they are tested and approved in accordance with IMO/SOLAS requirements. In addition to USCG, the system additionally carries type approvals from ABS and FM Global.

Novec 1230 has a negligible global warming potential – electrically non-conductive and non-corrosive, it’s safe for human exposure without any reduction in fire extinguishing capabilities.

www.sea-fire.com/

Titan Security Europe launches range of armoured vehicles

by Breaking NewsProductsProjects

Titan Security are now offering a new range of armoured vehicles for use in corporate, government and private security sectors across Europe. Titan are now able to provide custom built armoured cars including Range Rover, Mercedes Benz and Toyota Land Cruisers.

The standard range offers full body armouring with B6 level protection, B6 overlaps to provide protection from bullets following linear and angular trajectories, upgraded suspension, wheel assemblies, slotted discs on all wheels to enhance heat dissipation.

  • Armoured Range Rovers

Range Rovers are the most popular armoured vehicle as they offer exceptional all terrain mobility, high performance engines and high impact resistance. The range offers upgraded suspension and wheel assemblies, full armour coverage to B6 as standard, slotted discs and 20” wheel assemblies. Ballistic glass offers B6 level protection with armour plate overlap at key areas. Internal engine and vehicle components are fitted with additional plating, protection and redundancies to keep the vehicle moving.

  • Armoured Mercedes Benz

The S Class sedan is the pinnacle of luxury car and we are able to offer the new W221 generation in a variety of customised configurations including the S400 hybrid, S600, S63 and S65 AMG. The range offers complete armour coverage for all four sides and the roof, windshield and doors with ballistic overlaps and reinforced hinges to prevent potential misalignment of plates. The chassis has been fully reinforced and brake systems and suspension systems upgraded to provide increased mobility with armour plating.

  • Armoured Toyota Land Cruisers

Toyota land cruisers are the company’s popular flagship product and are available in left, and right hand drive with engine sizes from 4.0l V6 – 5.7l V8 Petrol and 4.5l V8 diesel offering exceptional power and speed.

The armoured land cruiser is incredibly versatile for all terrain and offers Smartarmour single piece armour design for sidewalls, overlapping Firewall armouring to minimise welding points, custom fabricated door panels, spall liner for bullet catching, updated armour to provide additional protection for batteries, engine wings, ECU, brake cylinder and radiators. The vehicle has been designed to act as a roll cage in the event of cars flipping and can be fully customised to customer’s specifications.

Automatic Fire Suppression Systems

As well as the standard features, Titan’s armoured vehicles can be fitted with CEN B7 level protective armour to protect from armour piercing rounds, ballistic radiator protection, certified blast protection, automatic fire suppression systems, communications systems, escape hatches and PA systems. They provide the most versatile armoured vehicles in the market today. All Titan’s vehicles are fully customisable and made to order so the client always receives a tailored armoured vehicle.

www.titansecurityeurope.com/

Viking Electronics launches 30AE-70V Ceiling Speaker

by Products

Viking Electronics has recently announced a new ceiling speaker – the 30AE-70V for 70-Volt and 25-Volt paging systems that are economical and dynamic. The speaker distributes sound evenly, accurately, and affordably.

“The 30AE-70V efficiently produces high quality audio and is a great addition to Viking’s paging collection,” said Paul Speltz, Senior Engineer, Viking Electronics, Inc.

30AE-70V Ceiling Speaker

Viking’s new 30AE-70V ceiling speaker is designed to evenly distribute sound from a 70-Volt or 25-Volt paging amplifier. It mounts into an 8.25 to 10-inch diameter cut-out or enclosure which is neatly concealed by the speaker’s faceplate.

According to the manufacturer, the 30AE-70V has an excellent frequency response for high quality sound reproduction. Five selectable power taps enable each speaker’s volume to be set to an appropriate level for its location. Each 30AE-70V can handle up to 10 Watts of power.

www.vikingelectronics.com/

SA Fire Protection launch the ‘Robot-TINO’ for firefighters

by ActiveProducts

SA Fire Protection, Italian manufacturer of fixed firefighting systems and equipment, have recently developed a highly customisable emergency response unit named the “Robot-TINO” for firefighters. The Robot-TINO allows fire fighters to get closer than ever to the fire while remaining at a safe distance.

The Robot-TINO was specifically designed for fighting fires in industrial process areas, tunnels and storage terminals, but it can also be used for terrorist incidents, urban areas, and whenever firefighters need to deal with hazardous substances or extreme temperatures. The unit is protected against heat radiation with a cooling system which allows the Robot-TINO to get closer to the fire origin to suppress it with higher probability of success. In this regard, the fire brigades are better equipped to deal with fires while keeping the risks to firefighters at a minimum.

In terms of manoeuvrability, the Robot-TINO gives the user complete flexibility to adjust direction (left/ right; forward/ backward) and height (up/ down movements & tilt). In addition to the high-visibility LED headlights and blinkers the Robot-TINO comes with, the unit can be fitted with cameras or sensors which can be used as a means of gathering intel when assessing the risks in inaccessible or dangerous areas, as well as assisting in search and rescue operations.

Due to its robust and durable design, the Robot-TINO can enable emergency responders to perform their duties better and more safely. Furthermore, this remote-controlled solution including the firefighting monitor can be installed with other accessories to allow complete operation from a remote location. Depending on what is required, it is possible to fit the Robot-TINO with a wide variety of accessories to suit the needs of the fire brigade such as monitors, dry chemicals, foam, gas detectors or Infrared camera systems. All options available can be tailored and adapted to the specific application and requirements of the Emergency Response Team.

With robotics already playing a key role in firefighting, it is the duty of manufacturers like SA Fire Protection to ensure that there are reliable solutions available to meet the needs of modern firefighters while keeping them as safe as possible.

www.safireprotection.com/

AMKUS Rescue Systems launches new tool range

by Products

AMKUS Rescue Systems has introduced a line of high performance, battery powered and twin-lined rescue tools. The cutters, spreaders and combi-tools are constructed from solid aluminium and are ready for service in the severe duty challenging first responders.

The new battery powered ION tool’s onboard pump system delivers amazingly fast performance under both loaded and unloaded conditions.

The tools are compact to access tight spaces and require less room on apparatus. In addition, they utilise the DEWALT FLEXVOLT platform, so the affordable batteries can be shared with other fire rescue tools like saws, lights and drills.

Like the ION tools, the new AMKUS LINE tools bring superior operator safety and performance to a family of tools long recognised as versatile and reliable. The all-metal bodies include ergonomic operator controls and the ability to reposition the tool at any time with minimal effort.

According to Kyle Smith, AMKUS president, “What really sets these tools apart, both ION and LINE, is their ability to deliver reliable performance in real world extrication scenarios. They’re powerful, quick, and versatile.”

Contact your local AMKUS dealer for a local demonstration or for more information. AMKUS Rescue Systems develops and manufactures a wide range of hydraulic and battery powered rescue tools and accessories.

FireArrest app launched to “support compliance with fire safety measures”

by PassiveProducts

Designed to support fire safety professionals in ensuring compliance with fire safety measures, the FireArrest app has launched. This new passive fire protection app allows site managers, surveyors and onsite teams to communicate across multiple fire safety projects.

The app has been designed alongside fire stopping professionals, specifically for use in the fire protection sector, with the aim of offering a solution that is “modern, easy to use, intuitive, wide-ranging.”

The full array of features allows fire professionals to work simultaneously on a project effectively and collaboratively while providing a complete audit trail of any work that has been completed to ensure compliance every step of the way, says the company behind the app.

Managing Director, Mark Shaw, said: “I’m delighted we have been able to roll this technology out. We’ve worked incredibly hard to create a product that is simple, affordable and effective. We are able to cover every stage of your passive fire protection project, from the first survey to completion. The app is full of tools and features which give users the opportunity to report and complete work efficiently.”

To coincide with the launch, FireArrest has also unveiled a new website. “We’ve opted for a modern and sleek design, to correspond with our brand values, and we’re really pleased with the results.”

To mark the app launch, FireArrest is offering an exclusive launch price, with the first six-months at half price for anyone who signs up.

DMP launches CellComF-LTE DualCom universal communicator with tip and ring terminals

by Products

For commercial fire installations, one can choose DMP’s new CellComF-LTE. Designed with the same platform as DMP’s DualCom Universal Communicator, the CellComF-LTE includes two sets of tip and ring terminals for easy installations.

This new design meets the NFPA 72 standard for single communications technology. For instance, if the CellComF stops communicating, it’s designed to automatically disrupt voltage on the second tip and ring, that triggers the host panel to annunciate the trouble.

Supervised LTE Alarm Communication

“For fire panels, it’s a simpler way of ensuring local annunciation,” says Aaron McGhee, product manager of Control Panels. “And, it’s a much cleaner and faster installation process.” The new CellCom Series includes both fire and non-fire options, each one with built-in LTE cellular.

When there’s an opportunity to upgrade non-DMP panels to LTE, this means one will be able to give customers a single path fully supervised LTE alarm communication over AT&T’s or Verizon’s LTE networks. As with earlier-generation products, the LTE communicators are designed to work with digital cellular service from SecureCom Wireless™, enabling dealers to get systems up and running quickly.

Berlin Fire Department to develop Hybrid Electric Firefighting and Rescue Vehicle

by ActiveProducts

Berlin Fire Department’s “eLHF” project, an abbreviation of “electric firefighting and rescue vehicle” in German, is a scheme backed by the Berlin Program for Sustainable Development (BENE). The main aim of this program, which is co-financed by the European Regional Development Fund, is to procure and pilot-test an innovative firefighting and rescue vehicle equipped with an electric drive to get it from A to B and run its extinguishing technology.

Austrian specialist Rosenbauer, the world’s manufacturer of systems for firefighting and disaster protection, is playing a vital role in the “eLHF” project. The Concept Fire Truck (CFT) study devised and produced by Rosenbauer already features technical solutions that may well resolve the issues firefighters will face in the future.

Ergonomically and ecologically optimised vehicle

According to Rosenbauer, the electric CFT is an ergonomically and ecologically optimised vehicle that adapts to a wide range of requirements and is intuitive to operate. Connectivity, globalisation and knowledge cultures – key trends incorporated into the CFT technology – are said to reflect the importance of communication and digitalisation in the society.

The growing significance of networking between humans and machines is also expected to be crucial in ensuring firefighting missions are successful. “Our innovation partnership with Berlin Fire Department represents an important milestone as we work toward the series production of our Concept Fire Truck,” says Dr. Dieter Siegel, CEO of Rosenbauer International.