Cygnus returns to London Build 2025 with certified wireless fire detection range

by ConstructionEventsFire Detection

Cygnus celebrates SmartNet anniversary at London Build 2025

Cygnus will exhibit at London Build 2025 from 19–20 November at Olympia, London.

The company said the event will mark the two-year anniversary of SmartNet, described as the world’s first fully EN 54 certified and 100% wireless fire detection and alarm system.

Cygnus explained that SmartNet is both EN 54 certified and BS 5839-1 compliant.

It is designed to be up to twenty times faster to install than wired systems, reducing disruption to buildings and operations.

The network operates through radio devices using a patented self-forming, self-healing wireless mesh design with multipath redundancy and channel hopping technology to ensure reliability.

Company outlines scalability and range options

Cygnus stated that SmartNet-Pro can connect up to 511 devices per panel and support 96 zones, with up to five panels networked for a combined total of more than 2,500 devices.

SmartNet-100 offers similar capabilities at a smaller scale, supporting up to 100 devices.

According to the company, SmartNet-100 is aimed at small to medium-sized projects where the scalability of SmartNet-Pro is not required.

Accessories and tools to enhance installation

Cygnus will also present its Accessories range at the show.

The Cygnus Configuration Software Tool and Mesh Analyser simplifies setup by providing visibility of radio communication paths, signal integrity and diagnostics.

The company said advanced cause and effect programming can be configured through the software, streamlining installation and commissioning.

The Portable Programming Unit enables installers to deliver firmware and configuration updates wirelessly on site, which Cygnus said helps in areas that are difficult to access.

The Site Survey Kit replicates the mesh network using three bespoke detectors to assess environmental suitability before full deployment.

Focus on engagement at the event

Denley Nunn, Head of Sales at Cygnus, said: “We’re delighted to be back at London Build.

“We had a great event last year and we were pleased with the feedback we received about the SmartNet fire detection and alarm system.

“We are looking forward to connecting with the industry again and delving deeper into our wireless system and our full range of accessories.

“We are excited to welcome visitors to stand M50.”

Visitors can find Cygnus on stand M50 to learn more about SmartNet and its supporting tools.

Further details are available at www.cygnus-systems.com.

Relevance for fire and safety professionals

The SmartNet system and accessories described by Cygnus are of interest to fire alarm system designers, installers and building managers involved in both new and retrofit projects.

The fully EN 54 certified wireless system provides options for fast installation with reduced disruption to occupied buildings, which may benefit public sector, healthcare and commercial facilities requiring continuous operation.

Its scalable structure, from SmartNet-100 to SmartNet-Pro, offers flexibility across project sizes, while tools such as the Mesh Analyser and Portable Programming Unit can assist installers in ensuring network stability and simplified commissioning.

For compliance officers and risk assessors, the dual EN 54 and BS 5839-1 certification provides assurance of conformity with recognised standards.

Wireless fire safety system installed at Welsh hospital

by Featured NewsFire DetectionProjects

Wireless fire alarm supports safety during hospital refurbishment

Cygnus has reported that its wireless fire detection system SmartNet-100 has been installed at Prince Charles Hospital in Merthyr Tydfil, Wales.

The project was carried out by Shield Fire & Security during a refurbishment programme that required removal of the site’s previous wired alarm due to asbestos works.

SmartNet-100 was selected because it is a fully wireless, EN 54 certified solution that did not require hardwired interfaces or expanders.

According to Shield Fire & Security, the system allowed for uninterrupted progress with the asbestos works while maintaining full fire detection capability.

The full installation was completed in three days.

Coordinated installation completed without disruption

Shield Fire & Security stated that the hospital remained operational throughout the installation.

The company coordinated with Tilbury Douglas, the site administrators, to ensure no disruption to hospital staff or patients.

The works were divided into two phases: one day to install the system on the ground floor, and two days for the first floor, which covered a larger area.

Lee German, Life Safety Systems Manager at Shield Fire & Security, said: “The nature of this install necessitated a wireless solution, and as one of the very few truly wireless fire solutions on the market, choosing Cygnus was an obvious choice.”

He added:
“It was our first time installing SmartNet and we were extremely impressed by both the speed and ease of installation.
We highly recommend SmartNet, it has become our preferred wireless solution.”

System built for small to mid-scale projects

Cygnus described the SmartNet-100 system as suitable for small to medium scale buildings.

It operates using a wireless mesh network of radio devices, and features self-forming, self-healing network technology with multiple communication paths.

According to the manufacturer, SmartNet-100 can be up to 20 times faster to install than wired systems.

It includes several of the same functions as the larger SmartNet-Pro system but is designed for simpler deployments.

Fire detection coverage across both floors

SmartNet-100 was installed across the hospital’s ground and first floors.

According to Cygnus, the ground floor installation included 18 heat detectors and 10 manual call points.

On the first floor, 16 heat detectors and three manual call points were added.

Output modules and sound bases were also deployed across both floors to complete the alarm system coverage.

Installer training and future plans

Shield Fire & Security staff completed both basic and advanced training at the Cygnus Academy to qualify as certified installers.

The company said that due to the installation’s success, more of its personnel will attend future training courses to become Cygnus Certified Installers.

Kevin Oliver, Project Manager at Tilbury Douglas, said: “As a busy live hospital, it was imperative that the building could continue to operate as normally and as safely as possible.”

He added:
“We are very pleased with the installation of the SmartNet-100 fire detection and alarm system.
It has allowed Prince Charles Hospital to remain operational with minimal disruption.”

Wireless fire safety system installed at Welsh hospital: Summary

Cygnus has reported that its SmartNet-100 wireless fire detection system was installed at Prince Charles Hospital in Wales.

The work was completed by Shield Fire & Security in coordination with Tilbury Douglas.

The hospital was undergoing asbestos-related works that required removal of its wired alarm system.

SmartNet-100 was selected due to its wireless operation and EN 54 certification.

Installation was completed over three days in two phases.

The system included heat detectors, manual call points, output modules and sound bases.

Shield Fire & Security completed Cygnus Academy training to become certified installers.

The company plans to send more staff for certification.

Cygnus stated the system is up to 20 times faster to install than wired systems.

Tilbury Douglas confirmed the hospital remained operational throughout the project.

No disruption to patients or staff was reported.

Bull Products to present integrated UK fire and site safety systems at Fire Safety Event 2025

by EventsFeatured NewsFire Detection

Bull Products to display SITEGATE, SITENET and SITEPROTECT in Birmingham

Bull Products has announced it will showcase a wide range of fire safety, site safety and access control systems at the Fire Safety Event 2025.

The company will present its SITEGATE, SITENET and SITEPROTECT systems, along with the Cygnus ALERT platform and Fire 360° service.

Carl Leeson, Head of Sales at Bull Products, said: “By working with one provider, companies can significantly reduce procurement costs, streamline training requirements, and enhance overall efficiency.

“Our integrated safety ecosystem ensures instant and reliable communication between fire alarms, site safety systems, and workforce management tools, thereby enhancing site security and operational efficiency.”

SITEGATE offers cloud-based workforce and delivery management

SITEGATE, Bull Products’ cloud-based access control and workforce management system, will be featured at the event.

It consists of three modules: Workforce Management, Online Induction and Delivery Management.

The system includes turnstiles and site entry control mechanisms, offering real-time data across single or multiple sites.

According to Bull Products, SITEGATE is designed to support security, reduce carbon emissions and improve operational efficiency.

It integrates with the SITENET and SITEPROTECT product lines.

Wireless alarm systems for temporary and permanent applications

Bull Products will also display its SITENET wireless alarm system, which holds EN 54 certification.

The system is designed for temporary use across construction and infrastructure projects, including high-rise buildings and underground works.

The wireless mesh system uses channel-hopping radio technology for consistent network connectivity.

Bull Products reports that it is the only provider currently offering an EN 54 certified 100% wireless solution for both indoor and outdoor temporary applications.

The SITEPROTECT product line provides additional wireless alarm capabilities for construction sites.

These include emergency fire, first aid, intruder and lockdown alarms.

Cygnus ALERT platform and Fire 360° service to be presented

Visitors will be able to learn about the Cygnus ALERT notification and monitoring system.

This cloud-based platform provides live updates on events, system faults and network performance.

The Cygnus Mesh Analyser displays the structure and strength of the wireless mesh system.

Bull Products states that this software is used by its engineers during installation and maintenance of SITENET systems.

Bull Products will also present its Fire 360° service, which includes risk assessments, site surveys, equipment servicing and asset management.

The company says this service helps customers maintain compliance and meet environmental targets.

Bull Products to present integrated UK fire and site safety systems at Fire Safety Event 2025: Summary

Bull Products will exhibit a range of fire safety and site management products at the Fire Safety Event 2025.

The company will showcase its SITEGATE workforce management system, SITENET wireless alarm system, SITEPROTECT temporary safety alarms and Cygnus ALERT cloud-based monitoring platform.

SITEGATE includes modules for workforce control, inductions and delivery tracking.

SITENET provides an EN 54 certified wireless fire alarm system for construction sites.

SITEPROTECT offers wireless alarms for emergencies and intrusions.

Cygnus ALERT allows real-time monitoring of site events and alarm network performance.

The Fire 360° service delivers fire risk assessments, equipment servicing and asset tracking.

All products integrate into a wider safety ecosystem designed to improve operational efficiency and support environmental goals.

Bull Products will demonstrate these systems at stand 4/G20 during the Fire Safety Event 2025.

Cygnus SmartNet celebrates two years of EN 54 certification at UK Fire Safety Event

by EventsFeatured NewsFire Detection

SmartNet to mark EN 54 certification milestone at UK exhibition

Cygnus has announced it will commemorate the two-year anniversary of its SmartNet fire alarm system receiving EN 54 certification at The Fire Safety Event 2025.

The announcement was made ahead of the exhibition taking place at the NEC in Birmingham from 8 to 10 April 2025.

SmartNet is described by Cygnus as the world’s first 100% wireless fire detection and alarm system to receive EN 54 certification.

The system is also BS5839-1 compliant and is designed to be up to 20 times faster to install than traditional wired systems.

Cygnus to highlight full SmartNet range including SmartNet-Pro and SmartNet-100

The company will use its stand (4/G20) to demonstrate SmartNet’s wireless mesh technology and showcase its full product range.

SmartNet-Pro can support up to 511 devices per panel and includes functionality for up to 96 zones.

Multiple panels can be connected via a software release code to enable a system of more than 2500 devices.

Cygnus will also present SmartNet-100, which has been developed for smaller-scale applications.

It supports up to 100 devices and provides a more cost-effective alternative to SmartNet-Pro while using the same core technology.

New accessories expand system capability and support installation process

Cygnus will also highlight its range of SmartNet accessories at the event.

These include Cygnus ALERT, a monitoring and notification platform that provides real-time updates about fire events, faults and mesh network status.

Other tools include the Cygnus Mesh Analyser, the Portable Programming Unit (PPU) for firmware updates, and the Site Survey Kit, which helps assess the environment’s suitability before full installation.

According to Cygnus, these additions support installers and end-users by simplifying the setup process and improving system performance.

SmartNet has been adopted across a range of building types

Stephen Marsh, Head of Sales at Cygnus, commented on the adoption of the system and its ongoing development:

“Over the past two years, SmartNet has been widely adopted across various sectors, from commercial and industrial properties to high-rise buildings and public institutions.”

He added: “Our SmartNet range has continued to develop over the last year, and we have introduced a comprehensive accessories range to complement the system including Cygnus ALERT, a remote monitoring and notification platform, the new Cygnus Mesh Analyser, Portable Programming Unit (PPU) and the Site Survey Kit.

“We are looking forward to welcoming visitors to our stand and celebrating two years of SmartNet.”

SmartNet celebrates two years of EN 54 certification at UK Fire Safety Event: Summary

Cygnus has confirmed it will mark the two-year anniversary of SmartNet achieving EN 54 certification at The Fire Safety Event 2025 in Birmingham.

SmartNet is a 100% wireless, BS5839-1 compliant fire detection and alarm system.

It is designed to be installed up to 20 times faster than traditional wired systems.

The system includes SmartNet-Pro, which can support more than 2500 devices across multiple panels, and SmartNet-100, which is suited to smaller sites.

Cygnus will also display its accessory tools including Cygnus ALERT, the Mesh Analyser, the Portable Programming Unit and the Site Survey Kit.

According to Cygnus, SmartNet has been deployed in commercial, industrial, high-rise and public sector buildings.

The Fire Safety Event takes place at the NEC from 8 to 10 April 2025.

Cygnus will be exhibiting on stand 4/G20.

Johnsons Workwear installs Cygnus SmartNet-Pro fire alarm system in Bristol

by Featured NewsFire DetectionProjects

Fire risk assessment prompts alarm system upgrade

Johnsons Workwear, an industrial garment laundry business in central Bristol, upgraded its fire detection and alarm system following a fire risk assessment that deemed its 30-year-old system inadequate.

According to Cygnus, the assessment recommended a category L1 fire alarm installation across the company’s three buildings.

Cannon Fire & Security, the appointed installer, selected the Cygnus SmartNet-Pro system, a 100% wireless, EN 54-certified fire detection and alarm solution.

Wireless system addresses installation challenges

The installation presented challenges due to the age and structure of the buildings, which contained extensive metal frameworks.

Many wireless fire alarm systems would require hard-wired expanders in such environments.

Additionally, concerns over asbestos risks meant drilling and cabling needed to be minimised.

Cygnus stated that SmartNet-Pro’s fully wireless design eliminated the need for drilling, allowing installation with minimal disruption.

This enabled Johnsons Workwear to continue operations throughout the process, reducing both time and costs.

Installation completed in two weeks

Dominic Gundry-White, Managing Director of Cannon Fire & Security, said: “We arranged a pre-site meeting with Johnsons Workwear to plan a hard-wired installation.

“After discussions with Cygnus, we opted for SmartNet-Pro, which eliminated the need for hard-wired cabling or boosters.

“Switching to SmartNet-Pro reduced our installation time from eight weeks to two, with no disruption to the client.”

The system was installed across two industrial laundry buildings and a separate boiler house, using a single SmartNet-Pro control panel.

The setup includes 170 Cygnus SmartNet-Pro devices, such as detectors, sounders, call points, and input/output units.

Positive feedback from Johnsons Workwear

Simon Child, Quality Controller at Johnsons Workwear, said: “Installing SmartNet-Pro meant that the business was able to continue operating smoothly with no disruptions.

“The wireless characteristics also meant that the speed of installation was a lot quicker than that of a wired solution.

“We have also found that every weekly test of the system we have carried out since installation has run smoothly and successfully.”

Johnsons Workwear installs Cygnus SmartNet-Pro fire alarm system in Bristol: Summary

Johnsons Workwear upgraded its fire alarm system following a fire risk assessment that deemed its existing 30-year-old system inadequate.

Cannon Fire & Security installed the Cygnus SmartNet-Pro system, a 100% wireless EN 54-certified solution.

The installation was completed in two weeks, significantly reducing disruption compared to the originally planned eight-week hard-wired installation.

The system was installed across three buildings using a single control panel, incorporating 170 devices including detectors, sounders, and call points.

Johnsons Workwear and Cannon Fire & Security have reported successful weekly testing since installation.

The company stated that the wireless system allowed for faster implementation and seamless integration without affecting business operations.

Cygnus SmartNet-100 installed by Cannon Fire & Security at Charles Pugh Glass

by Featured NewsFire DetectionPeople

Cannon Fire & Security has chosen Cygnus‘ EN 54 certified and 100% wireless SmartNet-100 fire detection and alarm system to deliver and install a solution in three days, for vehicle glass replacement company, Charles Pugh Glass.

The need for improvement

Charles Pugh Glass needed to replace its existing 25-year-old fire alarm system and asked Cannon Fire & Security to deliver a new system completed with modern standards. Cannon Fire & Security saw the potential of SmartNet-100 on this project. With 14 engineers now trained through the Cygnus Academy, Cannon Fire & Security are certified installers of the SmartNet system.

Charles Pugh Glass, a wholesaler of replacement vehicle glass, recognised the necessity of upgrading its fire detection and alarm systems following a fire risk assessment. The fire risk assessment revealed that the existing systems in their two buildings were no longer compliant with modern regulations and so they knew they needed to make a change.

SmartNet-100 is both EN 54 certified and BS 5839-1 compliant, providing Charles Pugh Glass assurance that the new system meets all relevant safety standards whilst still obtaining insurance requirements.

Charles Pugh Glass made the initial choice to upgrade its systems to satisfy fire risk assessment and insurance requirements but it was the benefits of 100% wireless and minimal disruption that made Cygnus’ SmartNet-100 stand out.

Features of the SmartNet-100

SmartNet-100 stands out because it is ideal for small to medium sized projects where the scalability of SmartNet-Pro is not required. The SmartNet-100 has many features and benefits of the SmartNet-Pro range, including the fact is is an EN 54 certified and 100% wireless fire detection and alarm system.

Built on a combination of radio devices, operating on a self-forming, self-healing wireless mesh network with multi path network redundancy utilising channel hopping technology that enhances reliability and robustness. Alongside all these features, SmartNet-100 is still up to 20 times faster to install than wired systems.

SmartNet-100 was installed into two buildings on the premises: the warehouse and the office and workshop, utilising two SmartNet panels with 75 devices, including smoke detectors, ceiling beacons and input/output units, connected to one panel and 85 on the second system.

Unlike other wireless options on the market, Cygnus provides a 100% wireless solution with no requirement for boosters and the mains power hardwiring which follows, allowing minimal disruption during an installation period of just three days.

Managing Director of Cannon Fire & Security, Dominic Gundry-White’s statement

“Choosing a 100% wireless solution has increased the speed and ease of installation. The installation only took three days to complete both buildings, where it would have taken 2-3 weeks for installation of a hard-wired solution”, states Dominic Gundry-White, Managing Director of Cannon Fire & Security.

Cannon Fire & Security choose Cygnus’ SmartNet-100 system to be installed at Charles Pugh Glass: Summary

Cygnus’ SmartNet-100 system has been chosen by Cannon Fire & Security to be installed at Charles Pugh Glass. This is following Charles Pugh’s request to find a replacement for their previous 25 year old fire alarm system that no longer met industry regulations.

Cygnus introduces CPD course for wireless fire alarm technology

by Featured NewsFire DetectionTraining

Cygnus launches CPD training on wireless fire detection systems

Cygnus has launched a Continuing Professional Development (CPD) course tailored for fire alarm installers, focusing on wireless fire detection technology.

According to Cygnus, the presentation addresses the growing adoption of wireless systems in fire safety. It explores their application in fire detection and mesh networks, aiming to equip professionals with practical skills for their work.

Stephen Marsh, Head of Sales at Cygnus, said: “Our new CPD presentation provides an excellent opportunity for professionals to stay ahead in their field, expand their expertise, and gain practical knowledge they can apply immediately to their work.”

Features of wireless fire alarm systems

The course examines how wireless systems have developed to overcome installation challenges such as tight timeframes and challenging environments.

The SmartNet system, Cygnus’ EN 54 certified, 100% wireless solution, offers a robust alternative to wired systems. Its self-forming, self-healing mesh network ensures adaptability, making it faster and easier to install.

Product details of Cygnus SmartNet systems

SmartNet comprises scalable options to suit diverse project requirements. The SmartNet-Pro supports 511 devices and up to 96 zones, with a combined capability of over 2500 devices across five panels.

The SmartNet-100 offers configurations for up to 100 devices on a single panel, networkable to five panels via a software upgrade.

These systems aim to simplify fire detection setups without the need for expanders or gateways.

Cygnus’ contribution to the fire safety sector

Cygnus, an independent developer of wireless fire safety technology, continues to innovate in life-saving equipment.

Starting with its radio evacuation systems for construction sites, the company has become known for providing reliable solutions that enhance safety and efficiency.

Its CPD course and SmartNet offerings reinforce its commitment to supporting professionals with practical and reliable technology.

Cygnus launches CPD training on wireless fire detection systems: Summary

Cygnus has developed a CPD course to enhance fire alarm installers’ knowledge of wireless fire detection systems.

The course explores the adoption of wireless technology, offering practical insights into mesh networks.

Cygnus’ EN 54 certified SmartNet system, with scalable options such as SmartNet-Pro and SmartNet-100, provides fast, reliable, and adaptable solutions.

Cygnus aims to support professionals by simplifying fire detection installation and maintenance, while also offering robust customer and technical support.

Cygnus and Bull Products join FIA to promote fire safety advancements

by Associations and OrganisationsBreaking NewsFire DetectionSafety

Cygnus collaborates with FIA to advance wireless fire technology

Cygnus has announced its partnership with the Fire Industry Association (FIA), the UK’s largest trade association for the fire protection sector.

The company, known for its EN 54 certified wireless fire detection and alarm systems, aims to strengthen its role in shaping fire safety technologies.

Stephen Marsh, Head of Sales at Cygnus, said: “We are thrilled to join forces with the Fire Industry Association.

“This partnership aligns perfectly with our mission to provide high-quality fire protection solutions.

“By collaborating with the FIA, we can leverage their extensive expertise and resources to further improve our services and stay at the forefront of fire safety innovations.”

Through this collaboration, Cygnus will participate in FIA-led initiatives such as training programmes and industry conferences to enhance fire safety practices.

Bull Products partners with FIA to improve construction safety

Bull Products, a provider of temporary fire, safety, and access control systems for construction and civil engineering, has also announced its partnership with the FIA.

The company plans to use this collaboration to reinforce its fire safety offerings, which include EN 54 certified SITENET alarm systems and SITEGATE, a cloud-based workforce management solution.

Carl Leeson, Head of Sales at Bull Products, commented: “We are delighted to enter into this partnership with the FIA.

“The FIA is a leader in promoting the highest standards and best practices in fire safety.

“This collaboration aligns perfectly with our commitment to enhancing fire protection and safety measures.

“Together, we look forward to contributing to a safer environment for communities and businesses across the country.”

FIA to support training and development for fire safety

The FIA is a not-for-profit trade association with over 1,000 members, focused on improving fire safety standards through training, advocacy, and technical support.

Cygnus and Bull Products will have access to FIA’s extensive resources, including training programmes, industry networking opportunities, and technical guidance.

These partnerships highlight the FIA’s role in facilitating advancements across the UK fire protection industry.

Impact of FIA partnerships on the fire safety industry

The collaboration between Cygnus, Bull Products, and the FIA is set to drive advancements in fire safety technology and industry practices.

Cygnus will use this opportunity to expand its SmartNet system, which features self-healing wireless mesh technology supporting up to 2,500 devices.

Bull Products will integrate FIA’s standards into its Fire 360° service, covering risk assessments and equipment servicing.

These partnerships signify progress in promoting enhanced fire safety measures across diverse sectors, including construction and civil engineering.

Fire protection leaders form partnerships with FIA: Summary

Cygnus and Bull Products have joined the Fire Industry Association to promote fire safety innovations and improve industry standards across the UK.

Cygnus aims to advance wireless fire detection systems, while Bull Products focuses on enhancing temporary fire safety solutions.

The FIA’s training and resources will support these companies in improving their offerings, with both firms committing to participate in FIA-led initiatives.

These partnerships reflect collaborative efforts to enhance fire protection technologies and practices.

Cygnus launches new Site Survey kit and Portal Programming Unit for SmartNet fire detection

by Featured NewsFire DetectionProducts

New tools support planning and deployment of Cygnus SmartNet system

Cygnus has launched two tools to aid in the setup and ongoing maintenance of its SmartNet wireless fire detection and alarm system.

The new Site Survey kit assists in planning and deploying the SmartNet system, while the Portal Programming Unit (PPU) enables wireless firmware and configuration updates for system devices.

The Site Survey kit is equipped with three bespoke detectors, enabling installers to simulate the SmartNet mesh network to assess the system’s compatibility with specific sites.

This tool is particularly useful in environments with structural obstructions, such as thick walls or steel-enclosed buildings, as well as for L5 category systems, ensuring a strong and reliable network from the outset.

Enhanced network reliability and installation efficiency

The Site Survey kit facilitates an optimised sensor network design by allowing installers to confirm signal strength and connection pathways at installation sites.

By conducting an initial survey, Cygnus staff demonstrate the control panel’s connectivity to system devices, providing visual confirmation of multiple communication paths.

This process assists in determining the necessary number of devices and their optimal positioning on-site, which contributes to smoother installations and reduced maintenance call-outs.

Stephen Marsh, Head of Sales at Cygnus, commented on the network’s stability: “We believe our network is the most robust and stable wireless network.

“Our certified installer partners have realised this through the projects they have completed.

“Now they can offer that same confidence and peace of mind to their customers before an installation takes place.”

Cygnus Mesh Analyser and ALERT monitoring platform for SmartNet

The Site Survey kit complements Cygnus’s existing commissioning tools, including the Cygnus Mesh Analyser and Cygnus ALERT monitoring platform, which help maintain the SmartNet system.

The Cygnus Mesh Analyser software visualises the network, displaying device signal strengths and connection routes within the mesh.

It also suggests performance improvements, contributing to reliable, long-term operation.

The cloud-based Cygnus ALERT platform supports real-time monitoring of system events and faults.

By delivering timely notifications, it allows site managers and integrators to respond quickly to issues, enhancing overall site safety.

Portal Programming Unit enables remote firmware updates

The Portal Programming Unit (PPU) facilitates firmware updates and device reconfiguration without requiring physical access to each device, which can be particularly advantageous for hard-to-reach installations.

Installers can activate programming mode, execute updates, and seamlessly reintegrate devices into the main SmartNet network, minimising time and disruption.

Stephen Marsh highlighted the value of these new tools: “These new products enhance our portfolio providing additional support tools to the SmartNet range.

“We are delighted to be able to launch both products and deliver solutions that help customers from the initial stages of a project design, through to ongoing maintenance.”

Cygnus SmartNet offers scalable, wireless fire detection

The EN 54 certified SmartNet system by Cygnus is a fully wireless solution designed for rapid installation without the need for physical gateways or translating devices.

SmartNet’s mesh technology, which is both self-forming and self-healing, can accommodate various project requirements, from the scalable SmartNet-Pro system, supporting over 2,500 devices, to the SmartNet-100, capable of connecting up to 100 devices from a single control panel.

Cygnus launches new Site Survey kit and Portal Programming Unit for SmartNet fire detection: Summary

Cygnus has introduced two new tools to support the planning, deployment, and maintenance of its wireless SmartNet fire detection and alarm system.

The Site Survey kit enables installers to verify network suitability on-site, providing visual confirmation of signal strength and guiding device placement for optimal network performance.

The Portal Programming Unit (PPU) streamlines firmware updates and device reconfiguration, especially useful for installations with limited access.

These additions complement Cygnus’s existing tools, such as the Cygnus Mesh Analyser and ALERT monitoring platform, further enhancing the reliability and efficiency of the SmartNet system.

Cygnus introduces Mesh Analyser for enhanced fire detection system management

by Featured NewsFire DetectionProducts

Cygnus launches diagnostic tool to aid fire detection and alarm systems

As reported by Cygnus, the company has launched a new diagnostic tool designed to improve the commissioning and maintenance processes of their fire detection and alarm systems.

The Cygnus Mesh Analyser software provides a graphical display of mesh signal strengths and connection paths for each device in a SmartNet fire detection and alarm system network.

The software, available for free download from Cygnus’ customer support portal, offers a comprehensive overview of the network, enhancing the efficiency of installation and maintenance.

Features and capabilities of the Cygnus Mesh Analyser

The Cygnus Mesh Analyser software displays the structure and strength of the mesh network and suggests actions to enhance system performance.

It also shows the history of device connections within the network, providing installers and end-users with a robust and stable network.

Stephen Marsh, Head of Sales at Cygnus, said: “The Cygnus Mesh Analyser is an exciting launch for us.

“This technology is crucial to instil confidence for end users and equipping our installer partners with comprehensive network information at their fingertips.”

The software is compatible with both new and existing SmartNet-100 and SmartNet-Pro systems, providing an audit trail of all network events and showing primary and secondary paths to ensure dual path redundancy.

Benefits for installers and end-users

Installers can download PDF reports from the software, outlining the health of the network and suggesting improvements.

Marsh added: “The technology in our SmartNet range is incredibly advanced, yet the product remains simple and user-friendly.

“It’s 100% wireless and requires no translator, making it a game changer for the industry.”

The SmartNet system, featuring patented self-forming and self-healing mesh technology, offers a reliable and adaptable solution that is significantly faster to install than wired systems.

The SmartNet-Pro system can support up to 2555 devices across five panels, while the SmartNet-100 system can manage up to 100 devices from a single control panel.