How to Dispose of Fire Extinguishers Safely: Step-by-Step Guide

That red canister sitting in the garage for the past six years isn’t just unused space. It’s pressurized and likely expired, and if it lands in a curbside bin, it becomes someone else’s problem the moment a hygiene worker picks it up. That’s the part most people never think about.

According to the U.S. Environmental Protection Agency, improper disposal of household hazardous waste can pollute the environment, damage wastewater systems, and put sanitation workers, kids, and pets at risk. A fire extinguisher fits directly into that category, even when it looks harmless sitting in a corner of the garage. Toss it in with the regular trash, and there’s a real chance the cylinder breaks during collection or the chemical agent dissolves into soil at a landfill.

This guide walks through how to dispose of fire extinguishers the right way, from figuring out whether the unit is actually done for, to depressurizing it safely, to finding a location that will take it away from your hands safely. None of it is complicated once someone lays out the steps in order, and that’s exactly what this article does.

When Should You Dispose of a Fire Extinguisher?

Not every old extinguisher needs to go immediately to the trash collection. Some just need a recharge and a fresh inspection tag. The trick is knowing which situation applies before deciding whether disposal is even the right call.

Expired Fire Extinguisher

Most extinguishers carry a service life of somewhere between five and fifteen years, depending on the type and the manufacturer. Check the pressure gauge and the manufacture date stamped on the bottom or side of the unit. If the gauge needle sits in the red zone, or the extinguisher hasn’t been serviced in years, it’s time to think seriously about disposing of the fire extinguisher options rather than hoping it still works.

Damaged or Discharged Extinguisher

Dents, rust, a cracked hose, or a handle that won’t hold pressure are all signs the unit is no longer trustworthy in an emergency. A discharged extinguisher, even one that’s only been partially used, loses its ability to fight a fire effectively and should be treated the same way as an expired one.

Recharge vs Disposal

Small damage or a low gauge reading doesn’t mean it’s not usable. A licensed fire equipment technician can often recharge a unit and extend its service life for a fraction of the cost of a new one. Disposal makes sense once the cylinder itself is compromised, the extinguisher type has been discontinued, or a routine fire extinguisher inspection indicates it is unrepairable.

How to Dispose of Fire Extinguishers Safely?

Getting a fire extinguisher disposed of isn’t a one-step job, and skipping a step is where most people run into trouble. Here’s the sequence that keeps things safe for the person disposing of it and for whoever handles it later.

Check If the Fire Extinguisher Is Empty

Look at the pressure gauge first. If it reads zero, the unit is likely empty, but don’t assume that automatically. The EPA notes that even containers that previously held hazardous products can contain residual chemicals, so an empty-looking extinguisher still requires careful handling rather than a quick throw in the bin.

Identify the Extinguisher Type

Water, foam, dry powder, CO₂, and wet chemical extinguishers each contain different chemicals, and that changes how they should be handled at the end of their life. Understanding the different classes of fire and fire extinguishers matters here, because a CO2 unit disposal process looks nothing like disposing of a halon-based one. Halon extinguishers in particular fall under stricter rules, since the EPA requires them to be recovered or recycled through facilities that follow NFPA standards rather than thrown out through normal waste channels.

Depressurize Safely If Applicable

Never attempt to puncture or crush a pressurized cylinder at home. That’s a fast way to turn a routine disposal task into an injury. Depressurizing should be left to trained technicians or handled at a facility equipped to do it correctly, especially for larger commercial units.

Follow Manufacturer Guidance

Check the label on the extinguisher itself. Manufacturers often print specific disposal instructions, and the EPA recommends reading product labels before disposing of any hazardous household item. If the label is broken away or missing, the manufacturer’s website or customer service line usually has the same information.

Prepare for Approved Disposal

Once the type is confirmed and the unit is considered safe to transport, set it up ready for disposal at an approved location. Don’t leave it loose in a car trunk for weeks. Keep it upright and secure until it reaches its destination.

Where to Dispose of Fire Extinguishers

Knowing what to do with an old extinguisher is only part of the process. Finding somewhere that will actually accept it makes the whole process feel a lot less like guesswork.

Household Hazardous Waste (HHW) facilities are usually the best option. The EPA recommends taking hazardous household products to approved HHW collection sites or community collection events rather than placing them in general household waste or throwing the material into a drain. Most states run these programs on a scheduled basis, and a quick search for the local municipality’s waste management page will usually turn up dates and locations.

Fire extinguisher recycling programs, run either by manufacturers or specialty recyclers, are another solid option, particularly for larger commercial units. Some fire equipment suppliers will take back old extinguishers when a customer buys a replacement.

A local recycling center may also accept empty, depressurized units, though it’s worth calling ahead since acceptance rules differ by location. Because household hazardous waste is regulated mostly at the state and local levels, one town’s rules won’t necessarily match the next town over.

Authorized fire equipment service providers round out the list. These are companies already familiar with extinguisher recharge and disposal work, and they’re often the quickest route for anyone who’d rather not spend an afternoon calling around.

Can Fire Extinguishers Be Recycled?

Recycling an old extinguisher sounds easy, but the process is a bit more layered than throwing an aluminum can in the bin. Understanding what actually gets reused and what needs special handling makes the decision easier.

The metal cylinder, usually steel or aluminum, can often be recycled once it’s been safely depressurized and confirmed empty. That part is genuinely good news for anyone trying to keep old equipment out of a garbage dump. The extinguishing agent itself is a different story. Dry chemical powder, foam powder, and especially halon require specialist handling rather than standard scrap processing. As mentioned earlier, halon extinguishers must be recovered through facilities operating under NFPA standards, since releasing halon into the atmosphere carries its own environmental consequences.

That’s why fire extinguisher recycling almost always runs through a facility rather than a disposal system. The environmental benefit is real. Steel recovery reduces the need for new raw material extraction, and keeping chemical agents out of landfills protects groundwater. It just takes the right facility to make that happen properly.

Mistakes to Avoid When Disposing of Fire Extinguishers

A handful of avoidable mistakes cause most of the problems people run into with extinguisher disposal, and nearly all of them are due to skipping a step for convenience.

Throwing an extinguisher, even an empty fire extinguisher, directly into household trash is the most common one. Garbage trucks compact waste, and a pressurized or partially pressurized cylinder can split if caught in that process. Puncturing or crushing the cylinder at home is another mistake worth avoiding entirely; it might seem like a quick way to “make sure it’s really empty,” but it’s genuinely dangerous and unnecessary.

Ignoring fire extinguisher disposal regulations in the local area is a mistake too, since fines and liability can follow if hazardous waste ends up somewhere it shouldn’t. Dissolving out any remaining chemical agent onto the ground or into a drain is equally risky, contaminating soil and waterways in the process. Skipping manufacturer instructions, assuming every extinguisher type follows the same rules, rounds out the list of things to avoid.

Conclusion

Disposing of an old extinguisher doesn’t have to be a complicated process once the proper steps are taken. Confirm whether the unit is expired, damaged, or simply due for a recharge. Identify the extinguisher type before doing anything else, since that determines the correct disposal route. Take it to an approved household hazardous waste facility, recycling center, or fire equipment provider rather than the regular trash. A little care at each stage protects the people handling waste down the line and keeps hazardous material out of places it doesn’t belong.

FAQs

How should fire extinguishers be disposed of safely?

Check the pressure gauge first, then figure out what type of extinguisher it is, since that changes everything that follows. Skip the pressure to puncture the cylinder. Bring it to an approved household hazardous waste center or a fire equipment recycler instead of leaving it curbside with regular trash.

Can expired fire extinguishers be recycled?

Mostly, yes. Once the cylinder is safely depressurized, the metal shell usually gets recycled without much effort. The extinguishing agent inside is trickier, though. Depending on whether it’s powder, foam, or halon, it often needs a specialist process before it can be handled responsibly.

Where should old fire extinguishers be taken for disposal?

A handful of solid options exist: household hazardous waste collection sites, fire extinguisher recycling programs, local recycling centers willing to take them, or an authorized fire equipment service provider. Any one of those beats planning it out with the weekly garbage.

Can empty fire extinguishers be disposed of in household waste?

Even a unit that looks totally spent can still be holding onto residual chemicals or a trace of pressure inside. Taking that extra step to an approved hazardous waste or recycling facility is worth the small effort.

What steps should be followed before disposing of a fire extinguisher?

Confirm it’s empty, identify the type, and depressurize it if needed. Then check the manufacturer’s disposal guidance before dropping it off somewhere equipped to handle it properly.

Do Fire Extinguishers Have an Expiry Date? Lifespan & Safety Standards Explained

Walk through any plant room or warehouse corridor and you will pass a red cylinder bolted to the wall. Most people do not pay it any attention. Safety professionals cannot afford that luxury. The question, do fire extinguishers have an expiry date, sits at the centre of lifecycle management, because an extinguisher that fails under pressure protects nobody. Expiry timelines, inspection responsibilities, and fire extinguisher maintenance records all feed into one outcome, which is equipment that works the moment a fire starts. Miss a service date and you invite enforcement action, insurance invalidation, and a genuine risk to life. 

This article explains how expiry and service life differ, how long fire extinguishers last, how to spot a fire extinguisher manufacture date during checks, and when to replace a fire extinguisher. Read it as a working reference for audits, not a theory piece.

Do Fire Extinguishers Have an Expiry Date?

So, do fire extinguishers have an expiry date? Not in the way a carton of milk does. You will rarely find a printed date that says the unit stops working on a given morning. What every extinguisher does have is a finite fire extinguisher service life, and that life ends whether the unit has been discharged or not.

Here is why. The cylinder sits under constant pressure, often for years. Seals harden. O-rings shrink. Dry powder settles and compacts at the base until it pours like damp sand. Stored pressure bleeds away so slowly that the gauge needle barely seems to move month to month. None of this activity is visible from across the room, which is exactly why lifecycle monitoring matters even for a unit that has never been touched.

Expiry Date vs Service Life of Fire Extinguishers

Three separate dates get confused whenever someone asks, do fire extinguishers have an expiry date. The fire extinguisher manufacture date is stamped on the cylinder and starts the clock on overall lifespan. The service date, recorded during each fire extinguisher inspection, confirms the unit passed its most recent check. Maintenance records then tie the two together, showing every recharge, part swap, and pressure test across the asset’s life. An extinguisher can be well within its manufacturer lifespan yet still fail compliance because its service record has lapsed.

Why Expired Fire Extinguishers Create Compliance Risks

In the UK, the Regulatory Reform (Fire Safety) Order 2005 places a legal duty on the responsible person to keep firefighting equipment in efficient working order. An expired fire extinguisher on the wall is documented evidence that this duty was not met. GOV.UK figures for the year ending March 2025 record more than 1,700 enforcement notices issued after unsatisfactory fire safety audits. Insurers take the same view. A claim can collapse over one out-of-date cylinder.

How Long Do Fire Extinguishers Last?

How long do fire extinguishers last in practice? Overall fire extinguisher lifespan ranges from 10 to 20 years for a well-kept unit. Under BS 5306-3, the British fire safety standard for portable extinguisher maintenance, most types receive a basic service every 12 months and an extended service at 5 years, which involves a discharge and an internal examination. CO₂ units follow a different path. Their cylinders face hydraulic testing at the 10-year mark, and many organisations simply retire them at that point rather than pay for testing.

Fire extinguisher lifespan is not a promise, though. It is a ceiling. Real-world conditions decide whether a unit reaches it.

Environmental Conditions That Impact Extinguisher Performance

Corrosion is the quiet killer. Coastal salt air eats steel cylinders from the outside. A leaking pipe above a wall bracket does the same job faster. Extinguishers mounted in vehicles absorb years of vibration that loosen fittings and compact the powder. Temperature swings in unheated warehouses stress seals through constant expansion and contraction. Even a dented base from a careless forklift can compromise cylinder integrity. This phenomenon is partly why interest in composite fire extinguishers continues to grow, as they resist corrosion that shortens the lifespan of traditional steel units.

Role of Maintenance in Extending Fire Extinguisher Service Life

Routine fire extinguisher maintenance is what carries a unit toward that 20-year ceiling. Annual servicing catches slow pressure loss before it leads to a total failure. Recharging after any discharge, even a two-second squeeze, restores the unit to readiness. Skip the schedule and a 20-year asset becomes a five-year liability.

How to Identify a Fire Extinguisher Expiration Date During Inspections

Finding a fire extinguisher expiration date takes about a minute once you know where to look, and it belongs in every routine fire extinguisher inspection. Each check turns the question, do fire extinguishers have an expiry date, into a yes or no answer for the unit in front of you. Start with the paper or plastic label on the body. Then check the cylinder itself. Then the tag. Together, they tell you the unit’s age, its service history, and whether anything has slipped.

Checking Manufacture Dates and Service Records

The fire extinguisher manufacture date is usually stamped into the metal near the base, on the dome, or etched around the neck ring. A four-digit year, sometimes with a month code, is standard. The maintenance label shows the last basic service, the last extended service, and the engineer’s details. Cross-check both against the site logbook. If the label says one thing and the records say another, treat the unit as unverified until proven otherwise. Missing documentation is a finding in itself, not a shrug.

Inspection Indicators That Require Immediate Action

Some faults cannot wait for the next scheduled visit. Pull a unit from service immediately if you see a gauge needle sitting outside the green zone, rust or pitting on the cylinder, a cracked hose, a missing safety pin or tamper seal, or a service label so faded that no date can be read. Each one signals that the extinguisher may not deliver its charge when squeezed. Swap in a serviceable unit before you walk away.

When Should Fire Extinguishers Be Replaced?

When to replace a fire extinguisher depends on three factors: what inspections reveal, what testing shows, and how old the cylinder is. Repair and recharge are sensible for younger units with minor faults. Replacement wins once the cost of servicing approaches the cost of new stock, or once the cylinder can no longer pass testing at all.

Signs of an Expired or Unserviceable Fire Extinguisher

Replace any unit that shows structural corrosion, a cylinder past its stamped lifespan, repeated pressure loss between services, or a failed extended service. Obsolete types belong on the list too. Halon units, and foam extinguishers containing PFOA-based agents banned in the UK from July 2025, should already be gone from most estates. An expired fire extinguisher kept as a spare is a trap. Someone will grab it during a fire and discover the problem at the worst possible moment.

Fire Extinguisher Testing and Replacement Planning

Hydrostatic and extended service fire extinguisher testing gives you reliable data on cylinder integrity, and the results should drive a rolling fire extinguisher replacement budget rather than panic purchases. Regulators are watching the situation more closely. The London Fire Brigade’s 2026 message notes that over 1,500 London buildings are still operating under revised evacuation strategies due to fire safety concerns, and that scrutiny of equipment records has sharpened since the Grenfell Inquiry, whose aftermath continues to shape UK fire policy. Plan replacements a year in advance, as auditors notice the difference.

Conclusion

So, do fire extinguishers have an expiry date? Not a printed one, but every unit carries a service life that ends, used or not. Knowing the difference between manufacture dates, service dates, and maintenance records lets you manage extinguishers as ageing assets rather than fixed wall decorations. Regular inspection, disciplined servicing, and planned fire extinguisher replacement keep equipment reliable and keep the organisation on the right side of fire safety standards. The cylinder on the wall only earns its place if it works on the one day it is needed.

FAQs

Do fire extinguishers have an expiry date printed on them? 

No printed expiry date exists on most units. Instead, a stamped fire extinguisher manufacture date and service labels together indicate age, condition, and when servicing or replacement becomes due.

How long do fire extinguishers last on average?

Most portable extinguishers last between 10 and 20 years with proper care. CO₂ units are often retired after 10 years, while well-maintained powder and water types can serve longer.

Can an expired fire extinguisher still be used in an emergency? 

It might discharge, but nobody can guarantee it. Pressure loss, compacted powder, and degraded seals make expired units unreliable, so they should be removed from service and replaced promptly.

How often should fire extinguishers be inspected and serviced? 

Monthly visual checks by staff, a basic professional service every 12 months, and an extended service at five years form the standard cycle under BS 5306-3 in the UK.

When should a fire extinguisher be replaced instead of recharged? 

Replace the unit when it shows corrosion, fails hydrostatic or extended-service testing, repeatedly loses pressure, exceeds its manufacturer’s lifespan, or uses an obsolete or banned extinguishing agent.

Britannia Fire launches P50 Monnex fire extinguisher

Britannia Fire has added to its P50 composite fire extinguisher range with the introduction of Monnex, a specialist, high performance dry powder for high-risk industrial settings.

Monnex powder is non-conductive and rapidly extinguishes Class B (flammable liquids) and Class C (flammable gas) fires. It works differently to standard dry powder, breaking into smaller particles in intense heat which increases its surface area and coverage to extinguish fires quickly and more efficiently.

Britannia Fire’s P50 Monnex fire extinguishers are designed for high-risk sites including petrochemical plants, airports, fuel depots, power stations and manufacturing facilities. They are also particularly suitable for isolated, offshore locations such as ships or oil and gas facilities.

All P50s are environmentally friendly and fully recyclable with a 20-year life span and a 10-year guarantee. Unlike traditional, metal fire extinguishers, they don’t require costly external annual servicing. Instead, simple checks can be carried out by a responsible person.

“High-risk industrial sites need fire protection that performs instantly and reliably in extreme conditions,” said Andy Spence, Managing Director of Britannia Fire. “The launch of our P50 Monnex extinguisher gives operators a specialist solution that delivers rapid knock-down on flammable liquid and gas fires, while also reducing long term maintenance and environmental impact.”

A model certified to the Marine Equipment Directive (MED) is also available, which includes the required Schrader valve for equipment used on ships, offshore platforms and marine installations.

“The MED approved P50 Monnex is ideal for offshore environments, where conditions are harsher and regulations are stricter,” added Spence. “The P50 doesn’t corrode like traditional metal extinguishers and is much more durable. It also doesn’t require annual servicing, something that’s historically been very difficult and costly in these hard-to-reach sites. The Schrader valve allows easy pressure checks and re-pressurisation.”

New click-together CheckFire stands offer compact storage for fire safety professionals

CheckFire introduces flat-pack fire extinguisher stands

Fire safety supplier CheckFire has launched the Commander Flat-Pack Fire Extinguisher Stand range to improve storage and transport efficiency for fire safety engineers and maintenance professionals.

The new units use a click-together assembly method that allows them to be delivered in a flat-packed format.

This design enables professionals to store and handle the equipment more easily when vehicle or warehouse space is limited.

The stands are available as single or double units and are manufactured to hold most types of fire extinguishers.

Technical specifications of the CheckFire Commander range

The stand is constructed from 100% polypropylene to ensure the unit remains durable while maintaining a low weight for portable use.

The single fire extinguisher model weighs 1.2kg and the double stand version weighs 2.1kg.

Engineers can assemble the two-piece units without the need for drilling or additional fixings.

The design accommodates fire extinguishers with capacities ranging from 2kg or litres to 9kg or litres.

These units feature a built-in recess to assist with the installation of CO2 cylinders and provide designated space for ID signs without using clips.

Joshua Marshall, product manager at CheckFire, said: “The Commander Flat-Pack Stand has been designed in response to evolving demands on fire safety provisions.

“Those responsible for specifying, installing, or maintaining equipment increasingly need reliable solutions that are easy to transport, quick and simple to assemble, and durable enough for long-term use.

“CheckFire is proud to deliver on all these fronts with the new Commander Flat-Pack Stand.”

CheckFire stated that the range is intended to simplify installation and support regulatory compliance on site.

Britannia Fire supports UK’s new PFAS incineration capacity review

Environmental Audit Committee report highlights Britannia Fire waste concerns

The Environmental Audit Committee (EAC) has published a report on perfluoroalkyl and polyfluoroalkyl substances (PFAS) calling for the Government to restrict non-essential uses of these chemicals across the United Kingdom.

Andy Spence, Managing Director of Britannia Fire, welcomed the findings following his address to the EAC in the House of Commons during June 2025.

Spence explained: “I welcome today’s report which reflects the thorough and focussed approach taken by the EAC.

“In June last year I was invited to address the EAC in the House of Commons to provide an industry viewpoint on the challenges facing the fire safety industry in achieving a smooth transition away from PFAS firefighting foams.

“The MPs listened carefully to my concerns and have highlighted them within the report, in particular the issue of impending bottlenecks and rising costs for the disposal of PFAS foam waste, with only two approved PFAS incinerating facilities currently operational in the UK.”

The cross-party committee warned that the current incineration capacity is insufficient to handle the expected volume of hazardous waste.

National remediation fund proposed for PFAS cleanup

The EAC report recommends that the Government should apply a polluter pays principle and consult on a national PFAS Remediation Fund by March 2027.

Toby Perkins MP, Chair of the Environmental Audit Committee, stated: “Our report calls for the Government to phase out PFAS uses that are clearly non-essential, such as in kitchen equipment and school uniforms, and to take a precautionary approach to approving new PFAS.

“Rather than waiting for proof that a chemical is harmful before banning it, companies should need approval before they introduce a new PFAS substance.”

Spence noted: “I agree wholeheartedly with the findings that urgent action needs to be taken.

“The UK is lagging behind Europe in restricting the use of PFAS.

“We haven’t kept pace and need to catch up.

“We eagerly await the recommendations from the Health and Safety Executive following a six month consultation on proposed restrictions of PFAS in firefighting foam and hope that swift action to phase them out follows soon after.

“Although the phasing out of PFAS for some essential applications may be challenging, banning PFAS foams in fire extinguishers is an easy win.

“There are PFAS-free foam alternatives already available as effective and affordable replacements, such as Britannia Fire’s P50 ECO model, introduced to the market back in 2024.

“Responsible customers are already beginning to make the switch, which is bringing the issue of safe disposal of PFAS foams to the foreground.”

The committee suggests a phased restriction on non-essential consumer products starting from 2027.

Britannia Fire calls for lithium-ion battery safety measures

Britannia Fire responds to battery fire figures

Britannia Fire has called for greater fire safety around lithium-ion batteries after new figures showed record numbers of e-bike and e-scooter fires attended by fire and rescue services in 2025.

Britannia Fire cited a Press Association investigation which found there were 432 e-bike fires and 147 e-scooter fires attended in 2025, up 38% and 20% on reports from the previous year.

Andy Spence, Managing Director of Britannia Fire, said: “Lithium-ion battery fires are by nature more unpredictable and intense than conventional fires.

“They are harder to extinguish, often behave differently to typical fires and can spread quickly, meaning that standard fire protection measures aren’t always adequate.”

The company linked the figures to the Government’s product safety consultation published at the end of March.

The consultation identifies unsafe e-bike batteries, conversion kits and chargers sourced from online marketplaces as a serious hazard.

It also proposes new duties on producers, suppliers and online marketplaces to improve safety standards in products containing lithium-ion batteries.

The British Standards Institution (BSI) is also developing a fast-tracked Publicly Available Specification (PAS) for batteries used in e-bikes, e-scooters and conversion kits.

Products launched for lithium-ion fire response

Britannia Fire recently launched the P50 AVD fire extinguisher and the AVD fire blanket in response to the rise in lithium-ion battery fires.

The AVD fire blanket is available in three sizes for different battery-powered products.

It is designed to be placed over a device to contain flames, block heat radiation and prevent fire spread.

The P50 AVD fire extinguisher is the newest addition to the company’s P50 composite range.

Britannia Fire said the extinguisher can be discharged under the blanket edge to cool and extinguish the fire and prevent reignition.

The company added that the P50 AVD has a 20 year lifespan, requires servicing once every 10 years and is fully recyclable.

Spence said: “We welcome the Government’s recognition that the current framework needs strengthening, and the focus on online marketplace accountability is long overdue.

“While regulatory reform takes time, lithium-ion fires continue to endanger lives and properties today.

“It’s important for landlords, facilities managers and business owners to consider extra precautions, particularly for locations with charging stations or clusters of battery-powered devices.”

He added: “As a nation we are using many more products and devices containing lithium-ion batteries than ever before.

“It’s vital that we introduce measures to make these products safer at the point of purchase, and it’s also important that fire safety equipment keeps pace with this growing trend, to keep people and property protected.”

Britannia Fire said its AVD products are suited to locations including bike storage areas in residential blocks or offices, IT equipment rooms and office environments, schools, universities and public sector buildings.

Britannia Fire appoints health and safety manager in Norfolk expansion

Britannia Fire appoints Phil Hodge

Britannia Fire has appointed Phil Hodge as Health and Safety Manager as it expands its manufacturing facility in Norfolk, UK, and responds to rising demand for its composite fire extinguishers.

Britannia Fire announced that Hodge will oversee health, safety and compliance, and support the business as it works towards ISO 14001 accreditation and its environmental targets.

He joins the company with experience in manufacturing environments, including work on ISO systems and sustainability measures aimed at reducing waste and carbon emissions.

Hodge previously spent 12 years as an explosives and weapons technician in the Royal Air Force (RAF), where he oversaw health and safety compliance in what the company described as an extremely hazardous environment.

He later worked at MSI-Defence Systems, where Britannia Fire said he helped build a safety culture across two sites with more than 200 employees and supported continuous improvement.

Britannia Fire links role to environmental targets

In the same announcement, Britannia Fire said Hodge will also support the business in preparing for a potential ban on PFAS and in managing disposal requirements for those chemicals.

Hodge said: “I have worked for 20 years in some of the most challenging and hazardous environments, and I bring a huge amount of knowledge and experience to Britannia Fire at a time of rapid business expansion and transformation.

“As well as ensuring operational safety and compliance, I will be implementing IS0 14001 systems across the business and building on the great work the team has already done to reduce its environmental impact.

“With a PFAS ban expected to be announced early next year, I will also ensure that these ‘forever chemicals’ are disposed of correctly and responsibly.”

Managing Director Andy Spence said: “We are thrilled to welcome Phil to Britannia at an exciting time for the business when we are rapidly expanding and demand is increasing.

“His expertise and commitment to a safe and healthy workplace will be invaluable as we continue to prioritise sustainability and the well-being of our team and uphold the highest safety standards.

“He joins our business as we work towards ISO 14001 accreditation and prepare for a potential ban on PFAS.”

Britannia Fire adds Finance Manager as production demand rises

Britannia Fire finance manager appointment

Britannia Fire has appointed Amy Bayliss as Finance Manager as the business continues to expand following another bumper year of production of its P50 composite fire extinguishers.

Bayliss is an Institute of Chartered Accountants in England and Wales (ICAEW) qualified accountant.

She joins from Norse Group where she held the role of Finance Business Partner.

Her new role marks a return to the manufacturing sector following a previous Management Accountant position at printing company Clays.

Role responsibilities and business priorities

In the role, Bayliss will manage financial planning and reporting across the organisation.

Britannia Fire said the appointment forms part of its investment in people and infrastructure to support growth as it responds to increasing demand for its fire extinguishers.

Bayliss said: “It’s exciting to be joining Britannia Fire at such a pivotal time for the business.

“The company’s commitment to innovation and quality is clear, and I’m looking forward to supporting its continued growth and success.”

Finance team changes and ESG focus

The company said Bayliss’s appointment will enable Financial Officer Karla Guadarrama to focus more closely on sustainability initiatives including Environmental, Social and Governance (ESG) projects.

Joint Managing Director Andy Spence said: “Amy is a great addition to our team, bringing a strong blend of technical accounting expertise and commercial insight.

“As we continue to grow, her experience and approach will be invaluable in supporting the next phase of Britannia Fire’s development.

“Her appointment also allows us to further advance our ESG ambitions, which are integral to the way we operate as a business.”

PFAS timelines clarified as OHEAP advises UK businesses there is no ban

OHEAP responds to PFAS questions in the UK

OHEAP Fire & Security is advising UK businesses that no PFAS firefighting foam ban currently applies in the country, despite new rules introduced in the European Union.

The company said headlines about per- and polyfluoroalkyl substances (PFAS) have led some organisations to believe their existing foam extinguishers are no longer compliant.

According to OHEAP Fire & Security, there is currently no legal requirement for any UK organisation to remove or replace PFAS-containing extinguishers.

The firm stated that it is already preparing for possible regulatory change but stressed that current equipment remains compliant in the UK.

OHEAP Fire & Security said it wants customers to avoid unnecessary expenditure or disruption based on mistaken assumptions about EU legislation.

EU PFAS regulation and current UK position

OHEAP Fire & Security explained that the European Union has introduced a PFAS ban under Regulation 2025/1988.

The regulation came into force on 23 October 2025.

It includes a ban on the sale of PFAS-containing foams in the EU after 23 October 2030.

It also requires the complete removal of PFAS-containing extinguishers in EU member states by 31 December 2030.

OHEAP Fire & Security emphasised that these deadlines do not apply in the United Kingdom.

The company noted that the UK Government and the Health and Safety Executive (HSE) are following their own process.

According to OHEAP Fire & Security, the HSE launched a six-month consultation on PFAS use in firefighting foam on Monday 18 August 2025.

The consultation is scheduled to close on Wednesday 18 February 2026.

OHEAP Fire & Security stated that UK decisions on PFAS in firefighting foam will only be made after this review concludes.

The firm reiterated that, for now, nothing has changed for UK businesses and all existing fire safety equipment remains compliant.

PFAS timelines and planning for UK businesses

OHEAP Fire & Security is calling for calm and clarity from organisations reviewing their firefighting foam provisions.

Nicholas Heap, Managing Director at OHEAP Fire & Security, said: “There is a lot of misinformation circulating, and we want to reassure our customers.

“The UK has not introduced any PFAS ban, and UK businesses do not need to remove or replace equipment at this time.

“OHEAP Fire & Security will guide customers through any future changes in a planned, cost-effective way.”

The company stated that early indications point to the earliest possible UK ban falling in late 2026.

OHEAP Fire & Security reported that a phase-out period of around five years is likely if a UK ban is introduced.

On that basis, the firm said existing PFAS foam extinguishers might not need to be removed until 2031 or later.

The company highlighted that these projected timelines would allow businesses to plan budgets and replacements in a controlled way.

OHEAP Fire & Security added that long notice periods should help organisations avoid unnecessary disruption to operations.

PFAS-free alternatives and ongoing support from OHEAP

OHEAP Fire & Security stated that it is already helping customers prepare for possible future PFAS restrictions.

The company said it is monitoring legislative developments and will provide factual updates as new information becomes available.

OHEAP Fire & Security confirmed it will offer guidance on replacement options only when regulations require change.

The firm outlined that it is already transitioning some organisations to the Hydrex ECO Fire Extinguisher.

According to OHEAP Fire & Security, Hydrex ECO is a PFAS-free extinguisher that is positioned as an environmentally responsible option.

The company said Hydrex ECO allows customers to move towards PFAS-free equipment in line with the direction of anticipated future regulations.

OHEAP Fire & Security added that this approach enables businesses to upgrade at their own pace over a longer term.

The firm stated that it aims to help organisations manage any eventual transition smoothly and in a cost-effective manner.

PFAS decision-making and equipment strategy in the UK

Procurement officers responsible for extinguishers and firefighting foam in UK organisations can use this information to avoid premature replacement of PFAS-containing equipment.

OHEAP Fire & Security’s explanation that current PFAS foam extinguishers remain compliant in the United Kingdom means replacement cycles can be aligned with confirmed regulatory decisions rather than media coverage.

Facility managers in industrial, commercial and public buildings can factor the potential earliest ban date of late 2026 and a likely five-year phase-out into asset planning.

This allows them to phase in PFAS-free extinguishers such as Hydrex ECO Fire Extinguishers alongside normal renewal programmes instead of undertaking immediate whole-site changeovers.

Risk assessors and fire engineering consultants can reference the distinction between European Union Regulation 2025/1988 and the current UK position when reviewing firefighting foam specifications and advising clients.

Fire-protection contractors, system installers and fire engineers can use the projected timelines and OHEAP Fire & Security’s stated support offer to plan service visits, replacement programmes and stock management over several years.

Specialists working with multi-site portfolios across the EU and UK can also separate EU deadlines from UK consultation dates when coordinating equipment strategies in different jurisdictions.

Correction: this article previously incorrectly stated ‘It includes a ban on the sale of PFAS-containing foams in the EU after 23 October 2025.

Britannia Fire director Andy Spence continues role shaping UK fire standards

Andy Spence re-elected to FIA board for third term

Britannia Fire has announced that its Joint Managing Director, Andy Spence, has been re-elected for a third term to the board of the Fire Industry Association (FIA).

The FIA represents more than 1,200 UK member companies and is Europe’s largest fire safety trade association.

It delivers training, technical expertise and standards guidance to help shape the development of the fire safety sector.

Spence’s ongoing contribution to standards and governance

With 25 years of experience in the fire safety industry, Spence has served on the FIA’s Extinguishing and Export Councils for over a decade.

He also sits on the British Standards Institution (BSI) FSH/2 Committee for Fire Extinguishers, contributing to the ongoing development of UK fire safety standards.

Earlier in 2025, he addressed the Environmental Audit Committee in the House of Commons to outline the industry’s challenges in achieving a smooth transition away from PFAS-based firefighting foams.

According to Britannia Fire, Spence’s re-election reflects his continued commitment to advancing quality, safety and environmental responsibility across the industry.

Focus on safety, innovation and sustainability

A strong advocate for sustainable practices, Spence has played a key role in driving forward improvements in extinguisher design and manufacturing processes.

He said: “It’s been a privilege to contribute to the fire safety industry over the years, so I’m immensely grateful to the FIA members for re-electing me to the board.

“It’s been a privilege to contribute to the fire safety industry over the years, so I’m immensely grateful to the FIA members for re-electing me to the board.

“A great deal of progress has been made in improving standards and embracing new technology but there’s still much to be done.

“I’m honoured to continue working with the FIA and its members so we can help to build a safer and more sustainable future together.”