Can Short Wavelength Infrared cameras benefit the Fire & Safety industry? Dr Samiul Haque, Senior Product Manager at Emberion investigates
The fire industry is continuously tackling challenging situations where adverse conditions can affect rescue operations. Smoke from the fire is a major disruption during a rescue operation and a camera that can see through smoke would provide a fundamental advantage in solving some of the key challenges.
Cameras that operate in the visible spectral range cannot penetrate through smoke. This is due to wavelength across 400-700nm (nanometres) being absorbed rather than reflected back. On the other hand, short wavelength infrared wavelength can penetrate through smoke particles and so with short wave infrared (SWIR) imaging one can easily see through smoke particles in the air.
Infrared camera developer Emberion has created a camera based on nanostructured materials which allows it to capture an image from visible range 400nm to extended SWIR range up to 2000nm using colloidal quantum dot materials which are semiconductor crystals (<20nm) that can be integrated on a single CMOS (complementary metal oxide semiconductor) readout chip. The readout chip allows the photons impinging on the surface of the sensor which subsequently generates electrons to be read out.
Emberion designs the readout circuits and the image pipeline user interface and ultimately a camera that can be deployed. We produce high performance visible to short wavelength (VIS-SWIR) infrared cameras based on its unique nanomaterials-based sensor solution and custom CMOS read out integrated circuit. We have also already enabled various applications in machine vision, surveillance, pharmaceutical, agriculture, multispectral imaging where both visible and infrared cameras are utilised.
Outdoor imaging
A challenging area for outdoor imaging is bad weather conditions for example when there is smoke, haze, or fog in the air. This can be address by SWIR imaging cameras. The incumbent technologies have been expensive due to the complexity of the fabrication procedures undertaken, for example the hybridisation semiconductor bonding processes of Indium Galium Arsenide (InGaAs). InGaAs-based sensors require complex wafer to wafer bonding processes and the yield of this process as you increase the resolution becomes more challenging as it requires the alignment of millions of micro-solder bumps to form micro-connections to a readout integrated circuit.
In comparison to the InGaAs processes, Emberion utilises scalable monolithic integration process which mainly consists of industry standard spin-coating, evaporation or sputter coating techniques making it a viable, highly scalable process in terms of manufacturability.
The camera can be utilised to see through smoke in outdoor conditions. During a test, the images captured by the Emberion VS20 camera clearly gave a clearer picture when taken through smoke than those shot with standard CMOS camera, such as those people have on mobile devices.
As the camera can capture from 400-2000nm and the visible range is from 400nm-700nm which needs to be cut-off to allow only the SWIR wavelength to be detected as the smoke particles let through the SWIR wavelength. Due to this, the image captured with Emberion VS20 SWIR camera with a 1000nm band pass filter in front of the lens of the shortwave infrared camera to filter the visible light out as it is the key precondition to see through smoke when looking at the images. The comparison images clearly illustrated the difference in the scene using CMOS camera and Emberion VS20 camera which allows imaging through the heavy smoke generated from the campfire.
In a similar application, we generated chemical or party smoke to demonstrate the capability of such cameras. It was observed that the SWIR images clearly see through the chemical smoke which was impossible to see through with the naked eye.
The future of SWIR
Emberion offers a dense roadmap where higher spectral resolution, mega-pixel densities and frame rates up to 400 frames per second(fps) will be released over the near term.
Soon we will start to offer high speed 400fps cameras for optical sorting and other markets. Additionally, the technical team are developing an ultra-broadband solution that will cover from Vis-SWIR-MWIR for simultaneous imaging in order to enable broadband surveillance and hyperspectral imaging. It has major benefits including:
- A Wide spectral range from Visible to Extended SWIR up to 2000nm with a tuneable peak
- A High Dynamic Range which offers better contrast and detection of bright and dark objects at the same time
- Up to 400 frames per second GigE compatibility (Full VGA) allowing the possibility of detection of objects in high-speed conveyor belts e.g. in optical sorting of food and waste recycling
- Monolithic integration for ease of manufacturing and scale up of manufacturing processes
- High-performance sensor, low noise with novel quantum dot material solution providing affordable e cameras compared to incumbent technologies
Emberion’s current product VS20 camera VGA resolution camera enables various applications in the machine vision industry, surveillance, safety and security, defence, optical sorting, semiconductor imaging, medical, automotive, laser beam profiling. Particular examples include water peak detection at 1920nm which has the maximum contrast levels, and PVC detection beyond 1700nm in waste recycling with our cameras due to the extended range of our sensors.
The sensors have high pixel operability greater than 99.98% and HDR up to 120dB. The images with our cameras enable detection of both bright and dark objects and allows for multispectral imaging and enabling hyperspectral solutions making it a key enabler for security, safety and fire industry.
Seeing through smoke or harsh conditions would provide added advantage in surveillance and fire safety applications as it can assist with early detection and assessment of the scene due. It can help fire safety professionals in heavy smoke environments to check for trapped individuals or objects through glass windows or in a rescue operation using SWIR cameras. These cameras have a wide range of use and the form factor can vary allowing fire safety professionals to use them as handheld units or the smaller size cameras as detachable body gear units for flexibility in operation.
This article was originally published in the September edition of IFSJ. To read your FREE digital copy, click here.