AkzoNobel debuts Chartek 2218E for shop-applied steel protection in Abu Dhabi

by Featured NewsPassiveProducts

Chartek 2218E launch announced at ADIPEC 2025

AkzoNobel said its protective coatings brand International has launched Chartek 2218E at ADIPEC 2025 in Abu Dhabi from 3–6 November, located at stand 15038.

The company described the product as the next generation of its epoxy passive fire protection solution within the Chartek range.

It said the new coating builds on more than 50 years of development in the portfolio.

International stated that the product focuses on enhanced performance and efficiency while maintaining established protection characteristics.

Single-coat, two-hour pool fire rating

According to the company, Chartek 2218E achieves a two-hour hydrocarbon pool fire rating in a single-coat application over Charlok mesh.

International said the coating is designed for shop-applied steel.

It is a patented boron-free epoxy intumescent, the firm added.

UL1709 thickness and weight claims

AkzoNobel said Chartek 2218E offers the lowest UL1709-certified thickness and weight in the industry for a W10x49 steel section.

The manufacturer linked these characteristics to installation efficiency on qualifying projects.

It positioned the product for large two-hour pool fire use cases in oil and gas assets.

Application efficiency and project impact

International stated that a streamlined application process enables faster project turnaround, lower energy consumption and reduced risk of delays.

The company said the coating can deliver up to 50% fewer application hours, up to 25% savings in shop-applied costs and up to a 25% reduction in material use.

It said these factors are intended to support both fabricators and applicators.

According to AkzoNobel, fewer hours, reduced material use and high durability can also lower maintenance costs.

The firm added that these benefits align with its aim to cut emissions by 50% across its value chain.

Durability, weathering and certification details

International said Chartek 2218E is part of a range with field-proven technology platforms.

The company stated that the product has been tested against ASTM D5894 and certified to UL2431 without a prescribed topcoat.

It added that this provides fire performance after weathering and allows a cosmetic topcoat to be specified without affecting long-term performance.

The firm said this combination is intended to give operators confidence that assets remain protected across the lifecycle.

Quotes from AkzoNobel representatives

Robin Wade, Global Fire Protection Manager at AkzoNobel, said: “Chartek 2218E represents the latest innovation in passive fire protection for the large two-hour pool fire market, which is critical for many oil and gas assets.

“It reflects our continued commitment to investing in innovation and sustainability in structural fire protection.

“Chartek 2218E can be applied in a single coat with Charlok mesh, maximizing productivity without compromising robustness and durability.

“Its patented polysiloxane-modified epoxy technology means steelwork can be stacked with minimal damage, enhancing throughput and overall fire efficiency.”

Andy Holt, Business Development Manager of AkzoNobel’s Middle East division, said: “Feedback from customers highlights that productivity and workshop efficiency remain some of the biggest challenges in oil and gas construction, and that’s exactly where Chartek 2218E delivers.

“Early demonstrations have been met with strong confidence from applicators and fabricators alike, who see the benefits first-hand in speed, consistency and ease of application.

“Maintaining that close collaboration with our customers is what drives continuous improvement and long-term trust.”

Visitor access and regional availability

According to the company, visitors to the ADIPEC stand can view product samples and speak with subject matter experts.

International said a dinner event on 5 November will include a presentation on Chartek 2218E efficiency and project value.

AkzoNobel stated the product will be available across the Middle East, South Asia and Australasia from November following the launch.

The firm said further regional rollouts are planned and that customers can contact local sales representatives for availability details.

Relevance for fire and safety professionals

Procurement officers and equipment specifiers can assess a single-coat approach that the company says achieves a two-hour hydrocarbon pool fire rating over Charlok mesh.

Oil and gas safety officers and fire engineering consultants may examine the claim of lowest UL1709-certified thickness and weight for a W10x49 section, alongside stated savings in application hours and material use.

Fabricators and applicators can review the stated reductions of up to 50% in application hours, up to 25% in shop-applied costs and up to 25% in material use for planning and throughput.

Standards and certification bodies may note testing to ASTM D5894 and certification to UL2431 without a prescribed topcoat, which the company says maintains fire performance after weathering.

Chartek ONE: AkzoNobel introduces epoxy passive fire protection solution at ADIPEC 2024

by Featured NewsPassiveProducts

Introduction of Chartek ONE in Middle East

International, part of AkzoNobel, has launched Chartek ONE, a single-coat, mesh-free epoxy passive fire protection (PFP) solution at the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2024.

Designed to simplify PFP application for energy sector assets, Chartek ONE aims to enhance efficiency, streamline installation, and boost health and safety measures.

The new product is a 100% solids, boron-free, two-pack material that provides combined protection against corrosion, cryogenic conditions, and hydrocarbon fires.

Chartek ONE offers up to three hours of jet and pool fire resistance, effectively shielding assets across a broad range of temperatures.

This latest PFP solution caters to the strict weight and safety requirements of offshore oil and gas industries, aiming to reduce workshop hours by up to 59%, as reported by International.

Enhanced installation efficiency for fire protection

Chartek ONE is formulated to speed up the installation of PFP systems, both in workshops and on-site locations, while maintaining the same level of fire protection.

By reducing installed weight, it addresses the challenges faced by sectors like offshore oil and gas, which demand low-weight solutions without compromising safety.

The material’s durability and versatility ensure it can withstand demanding environments without the need for additional mesh support.

According to International, this accelerated installation process can lead to reduced labour and material costs, saving both time and resources over the lifecycle of the protected asset.

This streamlined approach supports industries prioritising cost and time savings while adhering to rigorous safety standards.

Tested to meet global standards

Chartek ONE has been rigorously tested to meet critical industry standards, including NORSOK M-501:2022 Edition 7 and ISO 22899, which cover standard and high-heat jet fire scenarios.

Its 100% solids composition not only enhances durability but also reduces occupational risks, improving Health, Safety, and Environmental (HSE) performance.

The boron-free formulation also reduces the environmental impact of the product, aligning with AkzoNobel’s sustainability goals.

Robin Wade, Global Fire Protection Manager at AkzoNobel, stated: “Chartek stands at the forefront of the industry, offering a comprehensive range of solutions that reflect our heritage and track record of success.”

Middle East launch and future availability

The introduction of Chartek ONE at ADIPEC highlights AkzoNobel’s focus on addressing regional needs, particularly for Middle East customers seeking efficient fire protection solutions that consider environmental impact.

The product’s availability is expected to expand globally in 2025.

Andy Holt, Business Development Manager for the Middle East at International, expressed the company’s enthusiasm for the launch, stating: “We are thrilled to be introducing Chartek ONE for our Middle East customers at ADIPEC 2024.

“Crafted to offer our customers superior safety, reliability, and peace of mind, Chartek ONE showcases our continued dedication to sustainability and innovation.”

Chartek ONE: AkzoNobel introduces epoxy passive fire protection solution at ADIPEC 2024: Summary

International, part of AkzoNobel, unveiled its Chartek ONE epoxy passive fire protection (PFP) solution at ADIPEC 2024, specifically for the Middle East market.

The single-coat, mesh-free solution enhances efficiency and simplifies installation, while providing three hours of fire resistance and combined protection against corrosion and cryogenic conditions.

The 100% solids, boron-free composition reduces environmental impact and meets rigorous industry standards, including NORSOK M-501 and ISO 22899.

Chartek ONE aims to minimise project downtime and reduce costs for industries such as offshore oil and gas.

The product is currently available in the Middle East, with global availability expected in 2025.

MSA Safety unveils advanced flame detection and connected work solutions at ADIPEC 2024

by EventsFeatured NewsFire DetectionMiddle East - Breaking News

MSA Safety highlights new flame detection technology

MSA Safety is presenting its latest developments in flame and gas detection technologies at the ADIPEC 2024 event in Abu Dhabi, from 4 to 7 November.

The event, hosted by the Abu Dhabi National Oil Company (ADNOC), serves as a key platform for the energy industry to discuss challenges and explore safety and operational innovations for energy production environments.

Among the showcased products is the MSA General Monitors® FL5000 Multi-Spectrum Flame Detector.

Described as the industry’s first optical flame detector with Bluetooth connectivity, the FL5000 offers remote access for configuration, diagnostics, and event log monitoring.

This feature allows for easier device management and quicker response to potential safety incidents.

Enhanced detection capabilities with artificial neural networks

The FL5000 Flame Detector incorporates artificial neural networks (ANNs) to improve flame detection accuracy.

According to MSA Safety, this technology allows the detector to differentiate between actual flames and other sources that could trigger false alarms.

Such advancements are intended to increase reliability and safety in facilities by reducing the likelihood of false alerts.

Additionally, the FL5000 integrates with plant safety systems to support automated facility monitoring.

This communication capability is designed to streamline integration into existing safety infrastructures, enhancing overall safety management within industrial settings.

Connected work platform improves worker safety visibility

MSA Safety will also showcase its Connected Work Platform, featuring the ALTAIR io™ 4 Gas Detection Wearable.

The ALTAIR io 4 is designed for real-time, cloud-based visibility by connecting with MSA Grid software and the ALTAIR io™ Dock.

This system enables continuous monitoring and management of gas detection data, allowing rapid emergency response through the MSA Grid Shared Alerts feature, which sends notifications to relevant personnel in case of detected hazards.

Dave Howells, President of MSA International, stated: “For MSA Safety, we’re focused on creating an impact by helping to protect people, places, and the planet.

“We’re committed to helping reduce environmental impacts while helping to keep people safe at work.”

Additional safety solutions on display at ADIPEC

ADIPEC attendees will also have the opportunity to view MSA Safety’s range of gas detection, fall protection, and head protection equipment.

The company will be exhibiting the V-Gard C1® Hard Hat, which features ReflectIR® Thermal Barrier technology.

This technology aims to reduce heat stress for workers exposed to high temperatures, particularly in industries where sun exposure is a concern.

MSA Safety’s exhibit at ADIPEC, located in Hall 8 Stand #8176, will provide attendees with insights into the latest technologies aimed at enhancing safety and operational efficiency in high-risk environments.

MSA Safety unveils advanced flame detection and connected work solutions at ADIPEC 2024: Summary

At the ADIPEC 2024 conference, MSA Safety is showcasing its advancements in safety technology, including the FL5000 Multi-Spectrum Flame Detector, which offers Bluetooth connectivity and artificial neural networks to improve flame detection and reduce false alarms.

In addition, MSA Safety’s Connected Work Platform with the ALTAIR io™ 4 Gas Detection Wearable integrates with MSA Grid software for real-time monitoring.

These solutions, aimed at improving workplace safety in the energy sector, are complemented by other protective equipment, such as the V-Gard C1® Hard Hat.

The exhibition runs from 4 to 7 November in Abu Dhabi’s Hall 8, Stand #8176, as reported by MSA Safety

ADIPEC 2020 to be held virtually from 9-12 November due to COVID-19 restrictions

by EventsMiddle East - Featured News Archives

dmg events, organiser of the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC), and with the support of its strategic partner and host, the Abu Dhabi National Oil Company (ADNOC), has announced that the ADIPEC Strategic and Technical Conference will take place virtually between November 9 and 12, 2020.

This follows a directive from Abu Dhabi’s Department of Culture and Tourism that events should not take place in light of Covid-19 restrictions. The next full in-person annual exhibition and conferences will take place from November 8 to 11, 2021.

The decision to hold an online event ensures the ADIPEC Strategic and Technical Conferences will continue to provide the thought leadership that will frame the future oil and gas landscape and connect global organisations to shape the industry’s future.

Omar Suwaina Al Suwaidi, Chairman of ADIPEC said: “Despite the global challenge of COVID-19, we are delighted the ADIPEC strategic and technical conferences will take place virtually this year, enabling leaders from across the oil and gas industry to come together to share ideas and connect on a range of key industry trends, challenges, and opportunities.

“The health and welfare of all ADIPEC participants is our highest priority and we look forward to welcoming all visitors to the full in-person exhibition and conference at ADIPEC 2021. As we look to the future, collaboration, technology and innovation will be essential levers as we continue to identify new smart growth opportunities across the global energy landscape.”

ADIPEC is an annual global industry event that attracts world energy leaders to discuss and debate the future of global energy markets, geopolitics, and technology. Held for over thirty-five years, ADIPEC underpins Abu Dhabi as a global energy hub in bringing together the best of minds at a government and industry leadership level including senior academics, technology innovators and financial leaders.

dmg events Global Energy President, Christopher Hudson said: “We are committed to ensuring ADIPEC remains at the heart of the global oil and gas landscape, driving forward the conversations, collaborations, and connections that address key challenges and fuel innovative ideas and strategies that shape the industry.

“By staging a concentrated and abridged virtual conference program this year, ADIPEC will utilise cutting edge technology that has evolved exponentially over the last 4-5 months, to ensure the industry and its community has a voice to discuss and share the learnings of this year and into the future.”

Khalifa Yahweel Al Qubaisi, Chief Commercial Officer at the Abu Dhabi National Exhibitions Company (ADNEC), stated: “The Abu Dhabi National Exhibitions Company always co-ordinates closely with its partners to find optimal solutions that ensure the competitiveness of events which it hosts on both the local and international level. In order to ensure the health and safety of exhibitors and visitors, which is our company’s foremost priority across our operations, it was agreed with the organisers of ADIPEC to postpone the activities of this year’s exhibition to 2021.”

He added: “We look forward to welcoming the upcoming ADIPEC 2021 exhibition at the Abu Dhabi National Exhibition Centre. Our teams are currently developing a wide range of programmes that will improve exhibitor’s and visitor’s experience at this important event, ensuring to exceed their expectations and provide leading sector-based standards.”

Marking its 10th anniversary milestone this year, ADIPEC Awards 2020 will be presented in an immersive and interactive virtual awards experience in November 2020.

Fatema Al Nuaimi, Chief Executive Officer of ADNOC LNG and ADIPEC Awards Chairperson commented: “I am pleased we will be virtually staging this year’s awards and I am confident the progress and enhancements made to the ADIPEC Awards will magnify the value, prestige, and visibility of the ADIPEC Awards for years to come”.

As the organisers and ADNOC look to the 2021 edition, the event will retain its position as the premium event partner of choice and market leader within the global energy event industry, with ADIPEC 2021 promising a powerful platform for industry stakeholders and its value chain to display their innovation, launch new products, strike partnerships and conduct business that will fast track their recovery and highlight pathways to a successful future.

Held under the patronage of His Highness Sheikh Khalifa Bin Zayed Al Nahyan, President of the UAE ADIPEC 2021 will take place at the Abu Dhabi National Exhibition Centre (ADNEC). ADIPEC is hosted by Abu Dhabi National Oil Company (ADNOC) and supported by the UAE Ministry of Energy and Infrastructure, the Abu Dhabi Chamber, and the Abu Dhabi Tourism and Culture Authority.

www.adipec.com/