Third UK fire service convoy on its way to Ukraine

by ActiveFeatured News

The third convoy of UK fire service kit and equipment is now on its way, providing vital life-saving equipment to firefighters in Ukraine.

These monumental ‘mega’ convoys are the culmination of a number of weeks of incredible hard work and planning to ensure support is being given by the UK.

This means an amazing 60 fire vehicles – packed with hoses, helmets, thermal imaging cameras, generators, ladders, rescue equipment and protective equipment and other kit requested by Ukraine – have now been donated by UK fire and rescue services and the wider fire sector.

Organised by UK charity FIRE AID and International Development, the National Fire Chiefs Council (NFCC), EASST, and the wider fire industry, the convoys have also been supported by the Home Office and other government departments.

As well as kit and equipment being donated by fire and rescue services, the convoy has been joined by a fully kitted out mechanical team – provided by the fire sector – to ensure vital support to ensure its safe passage to Poland.

22 vehicles have left UK shores today and are on their way to Poland, where the kit will be handed over to Ukraine via the Polish State Fire Service.

The first convoy left in mid-March, the second one set off on April 21st and the third convoy has now left.

These donations of firefighting equipment – which has been requested by Ukraine – will help its fire and rescue service as they continue their life-saving work in the most difficult conditions imaginable.

Over one hundred fire stations and two hundred and fifty fire engines have been destroyed in Ukraine with a number of firefighters tragically losing their lives as they battle to protect their country.

The deployment of these donations is being supported by funding from the Home Office, Foreign, Commonwealth & Development Office, and the FIA Foundation.

The wider fire sector – including the MSA Safety, Fire Sector Federation (FSF), the Fire and Rescue Suppliers [FIRESA] Council and the Fire Industry Association (FIA) – are key partners in supporting and making the deployment.   

Chair of the National Fire Chiefs Council, Mark Hardingham commented: “Once again we have seen fire and rescue services, FIRE AID and the wider sector work together to make this happen. The situation in Ukraine remains at the forefront of everyone’s mind and to be able to assist is something everyone involved should be incredibly proud of.”

Ian Moore, Chief Executive, Fire Industry Association: “This third convoy has been the culmination of incredible partnership working, with everyone coming together to support this convoy. The wider fire sector is proud to have played its part in supporting this – a truly collaborative humanitarian response from the UK to assist those who need our help the most.”

Claire Hoyland, FIRE AID Project Manager said: “When we started collecting equipment six weeks ago, I could never have imagined the scale of the response. Everybody wanted to help. The deployment of 60 vehicles has been an incredible achievement by all involved but I must acknowledge our FIRE AID members EASST and Kent Fire and Rescue who have been working in Ukraine now for 10 years. The relationships that we have built up with in this time have been critical to the successful deployment of these convoys. For us, this is about more than just helping firefighters in a time of desperate need. It is also about helping friends and colleagues who have found themselves on the frontline of a war.”

Lord Greenhalgh, Fire Minister, said: “I am proud to see a further convoy of fire service kit on its way to Ukraine to provide vital support to the Ukrainian firefighters for the third time in less than two months. It is truly a great demonstration of hard work by civil servants, the UK’s fire and rescue services, the NFCC and FIREAID.”

Major developers agree to fund building safety repairs

by ActiveBuilding ManagementFeatured NewsIndustry Sectors

The government has revealed a wide-ranging agreement that will see industry contribute £5 billion to address the building safety scandal.

In a victory for leaseholders, Levelling Up Secretary Michael Gove has agreed a solution with the housing industry that will see developers commit a minimum of £2 billion to fix their own buildings. Industry will also pay up to a further £3 billion through an expansion to the Building Safety Levy.

Under the new agreement, which will become legally enforceable, over 35 of the UK’s biggest homebuilders have pledged to fix all buildings 11 metres+ that they have played a role in developing in the last 30 years.

For the companies yet to make the pledge, the Secretary of State has also confirmed there is little time left for them to sign up, and that those who continue to refuse will face consequences if they fail to do so.

As set out in January, a new government scheme will also see industry pay to fix buildings where those responsible cannot be identified or forced to in law. This follows previous confirmation that plans for a 30-year loan scheme paid for by leaseholders would be scrapped.

The new scheme will be funded through an extension to the Building Safety Levy that will be chargeable on all new residential buildings in England. This is expected to raise up to an additional estimated £3 billion over ten years from developers and ensure no leaseholder in medium-rise buildings faces crippling bills, even when their developer cannot be traced.

New proposed laws, announced in February under the Building Safety Bill, will ensure qualifying leaseholders are protected from the costs of historical building safety defects, including total protection against cladding costs. Today’s deal establishes that the industry responsible – not innocent leaseholders – will pay.

Levelling Up Secretary Michael Gove said: “Today marks a significant step towards protecting innocent leaseholders and ensuring those responsible pay to solve the crisis they helped to cause. I welcome the move by many of the largest developers to do the right thing. But this is just the beginning. We will do whatever it takes to hold industry to account, and under our new measures there will be nowhere to hide.”

The pledge published by government today commits developers who have signed up to legally binding contracts, and to implement their promises as soon as possible.

The detailed agreement confirms developers will:

  • Act as quickly as possible to fix buildings
  • Implement new proportionate guidance on building safety
  • Regularly report to leaseholders and government on their progress
  • Respect an independent dispute resolution process established by government; and
  • Refund money already received from the taxpayer to fix their buildings.

More information on how government plans to enforce the agreement in law will be released in due course.

The government is introducing new powers that could be enforced on a developer should they breach the agreement, as well as on any remaining companies who fail to sign up. These new powers would allow the Secretary of State to block those who refuse to sign from building and selling new homes.

The government is clear that building safety is an industry wide issue. Cladding and insulation manufacturers are yet to accept their share of responsibility and come forward with a proposal. The Secretary of State has also today written to the Construction Products Association and warned he will do whatever it takes to hold cladding and insulation manufacturers to account.

The announcement follows a statement from Mr Gove in January, when he set out a 4-point plan to reset the approach to building safety and give leaseholders more protection against unfair costs.

Gregg’s deploys active fire prevention system at new facility

by ActiveFeatured NewsIndustrialIndustry Sectors

Greggs, a UK-founded fast food service chain, deployed an active fire prevention system at its new deep-freeze high-bay warehouse at its factory near Newcastle Upon Tyne, UK.

The factory occupies 90,530 cubic metre, and the fire fire protection systems were provided by Wagner. Owing to the warehouse running several automated systems, there tends to be a higher risk of fire than traditional warehouses. This is due to the large amount of electrical equipment in the warehouse.

The high bay warehouse was difficult to protect by traditional methods due to the combination of its height, densely packed stored goods and deep-freeze operating temperature, Global Cold Chain News reported.

The automated high-bay warehouse stands at 23 metres tall and has a storage capacity with upwards of 14,000 pallet bays.

The warehouse is operated at -20°, where savoury baked goods will be stored frozen packaged in plastic trays or cardboard boxes, in both cases on wooden pallets. Something else, that had to be kept in mind: the warehouse is directly connected to the factory. If a fire occurs, it must not spread.

Gregg’s fire prevention system uses OxyReduct, that builds a protective atmosphere in the protected area with a permanently reduced oxygen level through the controlled introduction of nitrogen. This reduces the oxygen levels to prevent the spread of fires, taking the individual ignition thresholds of the most critical materials found in the warehouse into consideration. Sensors continuously measure the oxygen concentration in the protected area, working with the OxyControl system to maintain a constant oxygen operation concentration.

As a smouldering fire can still result despite oxygen reduction, the active fire prevention strategy also includes an early smoke detection system with air sampling smoke detectors.

London fire: Major blaze hits 22-storey tower block

by ActiveFeatured NewsSafety

A large fire broke out on Monday afternoon, in East London on the 17th floor of a block of flats. London’s fire service said it sent 15 engines and 125 firefighters to the high-rise at Whitechapel High Street.

Eye-witnesses described large panels of glass falling hundreds of metres to the ground and smoke bellowing out of the windows. Three commercial units underneath the railway arches were completely alight, and four cars and a telephone box were also on fire.

At one point, flames began to spread to a balcony on the 18th floor before fire crews put them out. Fire could later be seen through a window on the 19th floor.

A resident in the 10th floor of the building, who was visiting her friend from Nottingham, said no alarms went off. The fire severely disturbed several victims who were in the building. London Mayor Sadiq Khan said he was in “close contact” with London Fire Brigade’s commissioner Andy Roe, Sky News reported.

According to property developer Hondo Enterprises, which sold the building in 2018, it is a 22-storey mixed use development consisting of more than 7,000 square feet of retail area, 97,000 square feet of commercial office space and 207 residential apartments.

It is located over Aldgate East Tube station between the City, the financial heart of London, and neighbourhoods Aldgate and Spitalfields.

Peaky Blinders, Downtown Abbey film set gutted in heavy Yorkshire fire

by ActiveFeatured News

Image: West Yorkshire Fire & Rescue Service

More than 100 firefighters were involved in tackling a blaze at a mill complex used as a film location for hit shows such as Peaky Blinders and Downton Abbey. Fire crews were drafted in to tackle the inferno at Dalton Mills in Dalton Lane, Keighley, West Yorkshire, the BBC reported.

West Yorkshire Fire and Rescue Service said 20 pumps were called out just before noon on Thursday. The service said the incident was being scaled back but some crews would remain overnight to damp down the blaze.

People living in the vicinity were told to keep windows and doors closed and to avoid travelling through the area because of the smoke. There is a police cordon in place and some roads have been closed.

Nick Smith from West Yorkshire Fire and Rescue Service said nobody had been hurt in the fire. He said: “Internally the building has collapsed, the floor and the roof.” Firefighters spent the night damping down the fire neighbouring brigades were also in attendance, along with police, ambulances, Yorkshire Water and the Environment Agency.

Lack of domestic smoke alarms in UK causing fatalities

by ActiveBuilding ManagementFeatured NewsFire DetectionIndustry SectorsProductsProjects

In research presented by BAFE and NAPIT, data collated over the last decade (2010-11 to 2020-21) in England, Wales, and Scotland record an unsettling 424,464 dwelling fires.

These fires resulted in almost 82,000 non-fatal casualties and close to 3,000 deaths. In more recent statistics made available by Fire and Rescue Services nationwide, there is an ongoing issue with high failure rates or a complete absence of domestic smoke alarms.

In England alone, during 2020 / 2021, there was a 28% failure rate of smoke alarms (i.e. that failed to operate or were not present). This failure rate rises to 39% in Scotland and increasing even further to half of all fires (50%) in Wales.

The ‘Fire Kills’ campaign from the UK government states: “You are around 8 times more likely to die from a fire if you don’t have a working smoke alarm in your home”. Both BAFE and NAPIT have stressed the paramount importance of having suitable life safety systems in place.

Provisional data from the Department for Levelling Up, Housing & Communities reports close to 176,000 new build dwellings were started in England alone during the previous 12 months from year ending 2021 (July-September). It is of key importance that the housing development sector complies with Building Regulations and relevant Approved Documents when providing appropriate domestic fire detection and alarm systems. These must be installed by competent contractors.

In August last year, BAFE launched its latest competency scheme with NAPIT, called DS301. This provides a route for contractors to demonstrate their competence to design, install, commission, and maintain Grade D fire detection and fire alarm systems in domestic premises. This supports appropriate British Standards and working best practice, most notably the latest iteration of BS 5839-6 (Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises).

Justin Maltby-Smith, managing director BAFE, said: “This information clearly outlines that it is extremely important that any work on Grade D fire detection and fire alarm systems is performed in compliance with the appropriate current regulatory and competency documents available. Having suitable systems in place will aid in alerting residents as quickly as possible, allowing for a safer evacuation and providing emergency services more time to mitigate any damage. The housing sector has a great responsibility to use competent contractors, which is why the BAFE DS301 Scheme was developed, and it will clearly help in evidencing this competency. We must not lose focus that these are people’s homes, and they should feel safe and be confident in the systems installed.”

Frank Bertie, chief technical officer, NAPIT added: “These statistics show the risk to life posed by fire is a real threat. NAPIT are proud to be leading the way with the introduction of the new DS301 Scheme with BAFE to provide homeowners, house builders, management companies and specifiers with confidence that the contractor they use is appropriately qualified, competent, and assessed.  Registered members on the NAPIT DS301 Scheme have demonstrated their competency to deliver design, installation, commissioning and/or maintenance works for Grade D fire detection and fire alarm systems in domestic premises. Correctly installed fire detection systems help save lives and must be considered a priority in all homes.”

Meiko introduces new respirator warewasher

by ActiveBreathing ApparatusFeatured NewsProducts

Meiko has launched a new respirator washing machine that claims to save on labour, chemicals, hygiene, and most importantly ensures consistent results and eliminates the risk of human error. The German engineering brand specialises in manufacturing warewashing and food waste handling equipment.

According to Meiko this is the first disinfection machine to clean masks. The automated washing technology for respirators and face masks provides Log 5 protection.

Washing in a machine, rather than hand washing, protects staff from aerosols and ensures maximum hygiene and inactivation of Covid 19. Babcock’s Rosyth site is the first UK user of Meiko’s automated respirator washing technology, which provides Log 5 protection.

Colin Chrystal, health, safety and environmental manager, Babcock’s Rosyth said: “Along with being able to evidence compliance with regulations, we know that our people are supplied with fully maintained kit, to the highest levels of cleanliness.”

“We anticipate being able to fully inspect, disinfect and maintain 60 units per day, comfortably. Babcock’s Rosyth site is currently washing 10 masks per day using the Meiko TopClean M Cleaning and Disinfection system (3M 6000 full face respirators and 3M 7500 half mask respirators).

“We are also investigating the possibility of cleaning our powered Respiratory Protective Equipment (RPE) head tops using the same system (3M M-200 series Versaflo and Speedglas head tops).”

Major fire forces road closure in Wiltshire

by ActiveFeatured News

A fire in an large home caused a major road to be closed in Wiltshire, with plumes of smoke covering the skyline in the nearby area. The Dorset and Wiltshire Fire and Rescue Service were called to the property in the Westbrook near Bromham, just off the A3102.

An official statement from the Dorset and Wiltshire Fire and Rescue Service said: “At 6.59pm this evening our Service Control Centre received the first of multiple 999 calls to report a property fire in Westbrook near Bromham.

https://twitter.com/DWFireRescue/status/1494408374917775365

“Initially crews were dispatched to the incident from Calne and Melksham. Firefighters quickly requested support and we currently have 15 fire engines, three water carriers and an aerial ladder platform at this incident (approx. 75 firefighters).”Crews are dealing with a significant fire in a large property. The A3102 has been closed and will remain closed overnight while we deal with this incident.”

An update earlier today from the Dorset and Wiltshire Fire and Rescue Service said: “We have reduced our attendance at this incident over night. 20 firefighters remain on scene. The A3102 remains closed to allow us to deal with the incident. The road will remain closed for some time yet. A fire investigation into the cause of this incident will begin as soon as it is safe to do so.”

Global fire alarm and detection market to reach $53.15bn in 2032

by ActiveBreaking NewsFire DetectionHealthcareIndustrialIndustry SectorsPorts & MaritimeProducts

The global fire alarm and detection market is expected to be $53.15bn in 2032 expanding at a CAGR of 6% from 2022 through to 2032. The market is currently valued at $29.68bn in 2022.

The increase is forecasted to comes from a demand for developed fire safety systems in mining, automotive, petrochemical, oil and gas exploration, and power and utility sectors.

Rising deployment of fire alarm and detection systems across educational institutes and increasing awareness about its benefits among residents for fire detection systems are key factors propelling market expansion during the forecast period. Furthermore, ongoing technological developments in fire detection and alarming devices is expected to boost the industry’s growth in the coming time.

In addition, the advancement of wireless and remote function fire detection and alarm systems are anticipated to offer significant opportunities for expansion in the evaluation time.  

The Covid-19 pandemic ushered in a change in the demand and consumption pattern of fire alarm and detection systems. With increasing hospitalisation rates and shift towards remote working, the need for residential and healthcare setting oriented fire safety protocols have increased, leading to growing sales of fire alarm and detection systems across these domains.

Key players in the global fire alarm and detection market have adopted various strategies of mergers, acquisitions, and partnerships. In August 2021, ProPharma group acquired iSafety Systems, an Indian pharmacovigilance service provider.

Then in July 2021, ICON plc acquired a CRO, called PRA Health Sciences. The objective of the acquisition was to increase the services portfolio of ICON plc. In October 2020, Honeywell rolled out its first tools from its new suite of Connected Life Safety Services (CLSS), which is its first all-in-one cloud platform for fire safety systems.

Warringtonfire upgrades laboratory following UKCA certification demand

by ActiveFeatured News

Warringtonfire, a fire testing, inspection, and certification service provider, has said to have made significant investments in its High Wycombe fire resistant testing laboratory to meet the anticipated growth in demand ahead of the UKCA Mark deadline.

The transformation of the facility includes refurbishment of its onsite fire resistance and smoke laboratories. This comprises new smoke testing equipment, a complete re-lining of two test furnaces as well as installation of a new cold abatement system to extract test fumes from the fire laboratory environment.

Alongside the additional fire resistance testing equipment, Warringtonfire’s acoustics laboratory has also been revamped, with new acoustic measuring equipment to enhance and improve testing capabilities.

Lee Wade, general manager, Warringtonfire High Wycombe said: “We have seen a surge in demand for the smoke testing of products. This is being driven by both regulatory changes, such as the looming UKCA Mark deadline coming into effect from January 2023, as well as an increasing appreciation from our customers of the value that testing and certification adds to their products.

“That’s why, despite the uncertainty Covid-19 has generated within the industry throughout the past two years, we have committed to significant capital investment to ensure our laboratory is the benchmark for fire testing, inspection and certification here in the UK. In turn, this will help our clients ensure they can continue to market their products in line with the very latest regulations, in a timely and efficient way.”

Further investment has also been made to improve the facility’s sustainability credentials, with the installation of a new cold abatement system to extract fumes and odours from the test area, as well as fitting LED lighting throughout the laboratory. Alongside this, the company has added more floor space through a new purpose-built building to ease congestion and improve working conditions, allowing staff to build test specimens away from the furnace.

New digital viewing technology has also been introduced at Warringtonfire High Wycombe. The package enables customers to watch live product testing remotely at higher quality and has the capability to share live test data from Warringtonfire’s control system

“Given the changing ways we and our clients have had to adapt, we’ve increased our focus on digital technology. This includes new video packages, better viewing angles of tests in ultra-high definition, and the ability to zoom in on specific areas of the test and our furnaces,” said Wade.

“In order to maximise the potential of the investments made throughout the site, we’ve also embarked on an internal programme to train and upskill our colleagues in testing capabilities, technical qualifications, and project management. This will help our clients stay ahead of any regulatory changes, such as the UKCA Mark, and help them continually improve their products.”