UK remediation delays highlight demand for less disruptive cavity fire safety solutions

by Featured NewsPassiveSafety

UK Public Accounts Committee report highlights issues in cladding remediation

A report from the UK Committee of Public Accounts has raised concerns over delays and costs in cladding remediation across the country.

According to Light Science Technologies, the Injectaclad solution provided by its subsidiary Injecta Fire Barrier could offer a cost-effective, less disruptive method for cavity remediation.

The report, published on Friday 21 March 2025, found that work has yet to begin on half of the identified buildings.

It stated that the initial estimate of £600 million for 450 buildings has increased to a projected £12.6 billion to £22.4 billion for 9,000 to 12,000 medium and high-rise buildings.

It also highlighted a shortage of skilled workers and an increase in the expected scope of work.

Injectaclad solution positioned as alternative to façade removal

Injectaclad is installed within the internal cavity of a building, removing the need to dismantle brick or rendered façades.

Light Science Technologies stated that project quotes for Injectaclad are typically three times lower than conventional façade removal methods.

It added that the system enables reduced disruption for residents and shorter project durations.

It is designed to support lower risk mitigation under PAS 9980 guidance for fire risk assessments of external wall construction.

Injecta Fire Barrier activity since acquisition

Since its acquisition in November 2023, Injecta Fire Barrier has received orders totalling £2.7 million and has completed work on 11 buildings.

It currently has a quoted pipeline of active projects valued at £16.5 million.

Light Science Technologies expects this pipeline to convert at a faster rate following the Building Safety Regulator’s commitment to clear a backlog of 122 Gateway 2 projects by the end of April 2025.

CEO comments on cladding remediation and Injectaclad’s role

Simon Deacon, Chief Executive Officer of Light Science Technologies, commented on the Public Accounts Committee’s findings and the role Injectaclad could play in improving remediation progress.

Deacon said: “This report clearly highlights the slow progress on vital remediation work in the UK.

“In addition to that, public consensus is that the 2029 target for completing works is an unacceptably long time for this work to go undone.

“A stark reminder of this danger came only last August with the Dagenham fire.

“We have a compelling solution that meets new safety standards, saves money, is far faster to implement, causes significantly less disruption, and is quick to scale.

“Wider adoption of Injectaclad ultimately means that homes and places of work will be safer; both at a faster rate and with less financial burden.”

UK remediation delays highlight demand for less disruptive cavity fire safety solutions: Summary

The UK Committee of Public Accounts published a report on 21 March 2025 addressing delays in cladding remediation.

Light Science Technologies stated that its Injectaclad product offers a cost-effective solution.

The report said half of identified buildings have not had work started.

Projected costs have risen from £600 million to between £12.6 billion and £22.4 billion.

Injectaclad is installed within wall cavities, avoiding façade removal.

The system aligns with PAS 9980 guidance.

Since November 2023, Injecta Fire Barrier has completed work on 11 buildings.

It has taken £2.7 million in orders and built a quoted project pipeline worth £16.5 million.

The Building Safety Regulator aims to clear a backlog of 122 Gateway 2 projects by April 2025.

Simon Deacon, CEO of Light Science Technologies, said the Injectaclad solution reduces disruption and cost.

Wetherby Wall Systems introduces fire-tested insulation for buildings over 11m

by Featured NewsPassiveProducts

New insulation system meets fire safety rules for buildings over 11 metres

Wetherby Wall Systems has announced the launch of SOQEL A2, a below damp-proof course (DPC) external wall insulation (EWI) system designed to meet UK fire safety standards.

As reported by Wetherby Wall Systems, SOQEL A2 is the first fully fire-tested system designed for below DPC applications and meets the A2-s1,d0 fire classification.

This meets current UK Building Regulations for materials used in buildings over 11 metres in height.

The system became available on 17 March 2025 and is intended to offer contractors, architects and specifiers a compliant and durable alternative to traditional below DPC solutions.

Designed for high-risk areas with foot traffic and moisture exposure

SOQEL A2 is intended for use in base areas of external wall insulation systems, including balconies, plant rooms and walkways.

The system features Coverrock x-2 pre-coated insulation, which is bonded to protect the A1-rated stone wool core during application.

This design is aimed at withstanding impact and moisture exposure in high-risk areas.

It also incorporates Heck K+A SL coating and Heck CER Mesh.

According to the company, this combination is designed to improve impact resistance and durability in environments exposed to weather and pedestrian activity.

Appearance designed to match wider façade systems

Wetherby Wall Systems stated that the SOQEL A2 system integrates with existing façade systems to avoid visual disruption.

The inclusion of Heck 4S Silicone Render provides a seamless finish intended to match the surrounding insulated façade.

This differs from traditional below DPC treatments, such as bitumen paint, which can contrast with the building’s appearance.

The system is positioned as a functional and aesthetic solution for areas where performance and appearance both need to be considered.

Joint development with HECK in Germany

Wetherby Wall Systems developed the SOQEL A2 system in collaboration with HECK, part of the ROCKWOOL Group.

Joe Ragdale, Technical Director at Wetherby Wall Systems, said: “We have worked alongside our ROCKWOOL Group sister company, HECK in Germany to launch this innovative system into the UK market.

“We are delighted to introduce SOQEL A2, the first system of its kind for below DPC and base areas.”

He added: “This solution provides architects and contractors working on remediation projects with a compliant, durable, and efficient way to enhance building safety while ensuring a seamless finish alongside insulated façade systems.”

SOQEL A2 launched for compliant below DPC insulation in UK construction: Summary

Wetherby Wall Systems has launched the SOQEL A2 insulation system for below DPC use in the UK.

The system is designed to meet the A2-s1,d0 fire classification, in line with UK Building Regulations for materials used in buildings over 11 metres.

SOQEL A2 is aimed at base areas, balconies, plant rooms and walkways where fire resistance, impact protection and moisture durability are required.

The product features Coverrock x-2 pre-coated insulation, Heck K+A SL coating and Heck CER Mesh.

It also uses Heck 4S Silicone Render to provide a seamless finish.

The system was developed in partnership with HECK in Germany, also part of the ROCKWOOL Group.

Wetherby Wall Systems stated that SOQEL A2 is intended to replace traditional below DPC solutions, including bitumen paint, by offering a compliant and durable option.

Fire safety remediation: RSH reports 1,920 buildings with critical external wall defects

by Breaking NewsBuilding ManagementPassiveSafety

Fire safety remediation survey identifies 1,920 buildings with critical issues

The Regulator of Social Housing has reported that 1,920 buildings in the social housing sector in England have a life-critical fire safety defect linked to their external wall system.

According to the latest quarterly data published on 20 March 2025, 17,299 buildings over 11 metres in height were reported by landlords.

Of these, 11.1% were identified as having a life-critical fire safety (LCFS) defect related to the external wall system.

The data was gathered during the Q3 2024/2025 survey, which ran from 13 December 2024 to 22 January 2025 and covers reporting as of 31 December 2024.

Most remediation expected within five years, though delays remain

73.6% of buildings with LCFS defects are expected to be remediated within five years.

However, the Regulator noted that completion dates for 21.1% of affected buildings extend beyond ten years or remain unclear.

Landlords said that delays were caused by complex legal arrangements, difficulties in sourcing contractors and issues in the supply chain.

Remediation work has begun on 355 buildings, or 18.5% of the total affected.

Monitoring continues across all landlords with relevant buildings

Landlords are required to submit quarterly data to the Regulator and the Ministry of Housing, Communities and Local Government.

They are expected to maintain accurate records and ensure risk mitigation measures are in place while remediation work is ongoing.

Will Perry, Director of Strategy at the Regulator of Social Housing, said: “Tenants’ health and safety is non-negotiable and we have a number of tools at our disposal – including these surveys, as well as proactive inspections and responsive engagement – to make sure landlords are making the necessary progress on fire safety remediation.

“Boards and councillors have a duty to seek assurance that landlords are meeting legal obligations for building safety, and that risks are being well managed and promptly remedied.

“This includes any risks to tenants while work has not been completed.”

Data shows historical and ongoing remediation progress

Since 14 June 2017, a total of 2,545 buildings have been identified with an LCFS external wall defect.

Of these, 625 buildings (24.6%) have already been remediated.

An additional 123 buildings (4.8%) have had works completed and are awaiting a new building works assessment.

A total of 478 buildings (24.9%) are reported to have had remediation works either started or completed.

In the most recent quarter, 29% of landlords (434 in total) reported owning at least one relevant building, with most being large landlords with 1,000 or more units.

Fire safety remediation: RSH reports 1,920 buildings with critical external wall defects: Summary

The Regulator of Social Housing published quarterly fire safety remediation data on 20 March 2025.

It reported that 11.1% of the 17,299 relevant buildings in England’s social housing sector have a life-critical fire safety defect related to external wall systems.

The data, covering Q3 2024/2025, showed that 73.6% of affected buildings are expected to be remediated within five years.

Remediation has started on 355 buildings.

Since June 2017, 2,545 buildings have been identified with external wall defects.

Of these, 625 have been remediated and 123 have completed work awaiting assessment.

406 buildings have a completion date beyond ten years or an unclear timeline.

The report stated that delays stem from legal, contractor and supply chain issues.

434 landlords reported at least one relevant building this quarter, mostly large providers.

The Regulator continues to monitor remediation progress through surveys, inspections and engagement with landlords.

Promat achieves Indoor Air Comfort Gold certification for fire protection boards

by Featured NewsPassive

Promat receives Eurofins certification for low VOC emissions

Promat has secured Indoor Air Comfort Gold certification from Eurofins for its fire protection boards, demonstrating compliance with low volatile organic compound (VOC) emissions standards.

The certification applies to all of Promat’s standard calcium silicate and mineral-bound fire protection boards.

These products have been tested to EN 16516 and meet sustainability requirements for building standards such as BREEAM and LEED.

The certification confirms that Promat’s fire protection boards support healthier indoor air quality and sustainable building design.

Certification supports sustainable construction standards

According to Promat, the Eurofins certification provides third-party verification that its products meet industry sustainability standards.

The company states that this helps architects and specifiers ensure compliance with environmental regulations.

Eurofins, a global laboratory specialising in VOC testing, continuously updates its certification criteria in line with industry changes.

This ensures that certified products remain compliant with evolving sustainability documentation requirements.

Promat’s sustainability initiatives and commitments

Promat has outlined its sustainability objectives through its ‘6 steps to CLEARCHANGE’ programme, which includes goals for environmental responsibility and product transparency.

The company reports having 26 Environmental Product Declarations (EPDs) across its product range, offering lifecycle assessment data for its fire protection solutions.

These declarations provide information about the environmental impact of Promat’s boards in construction projects.

Industry perspective on indoor air quality

Duncan Gardiner, Promat Platform Sustainability and Communications Manager, commented on the certification: “Indoor air quality is essential to quality of life both for people working with Promat’s products, and those living in or spending time in the building.”

He added: “This Eurofins certification confirms the low VOC emissions of our passive fire protection boards and that our products can be used with absolute comfort indoors.

“Having third-party verification for our products is key to providing accessible and reliable sustainability information to our stakeholders, and this is one step towards supporting market needs for sustainable design.”

Promat achieves Indoor Air Comfort Gold certification for fire protection boards: Summary

Promat has received Indoor Air Comfort Gold certification from Eurofins for its fire protection boards, verifying low VOC emissions.

The certification applies to all standard calcium silicate and mineral-bound boards and aligns with sustainability standards such as BREEAM and LEED.

Eurofins conducts VOC testing under EN 16516, updating certification criteria based on industry changes.

Promat states that this provides ongoing compliance for sustainable building documentation.

The company has committed to sustainability through its ‘6 steps to CLEARCHANGE’ initiative, which includes 26 EPDs covering its product range.

Promat reports that these declarations support sustainable design and environmental transparency.

Duncan Gardiner of Promat highlighted the importance of indoor air quality and stated that third-party verification is essential for providing reliable sustainability information.

Quelfire and Ark Fire Protection collaborate on fire safety training in London

by Featured NewsPassiveProjects

Fire safety training conducted at Kings Cross construction site

Quelfire and Ark Fire Protection have partnered to provide fire safety training for construction professionals on a Bouygues UK project near Kings Cross, London.

According to Quelfire, the training focused on passive fire protection and was delivered to site staff, site managers, and contracts managers.

The sessions aimed to ensure compliance with fire safety regulations and equip participants with the latest skills and knowledge for installing firestopping products in line with test evidence.

The partnership highlights the importance of collaboration in the construction industry to address evolving fire safety requirements and improve installation standards across projects.

Ongoing fire safety training in the construction industry

Quelfire states that ongoing training is essential for ensuring compliance and supporting workers in making informed decisions regarding firestopping installations.

Service penetration sealing remains a complex aspect of fire protection, requiring up-to-date knowledge of regulations and best practices.

Quelfire’s CPD training covers various topics, including the latest industry standards and installation techniques.

This approach aims to build a culture prioritising fire safety, particularly for high-risk developments where inadequate firestopping could have serious consequences.

The role of collaboration in fire safety compliance

Quelfire and Ark Fire Protection’s collaboration with Bouygues UK demonstrates the benefits of aligning all parties involved in a construction project.

Effective communication and quality assurance help ensure that firestopping solutions are installed correctly from the outset.

Addressing potential challenges during the design stage can also minimise unexpected costs and delays.

Ark Fire Protection relies on Quelfire’s firestopping solutions for its installations, while Bouygues UK, as the client, benefits from a fire safety approach designed to meet regulatory requirements.

Passive fire protection and risk reduction

According to Quelfire, passive fire protection plays a critical role in containing fire and smoke, preventing their spread and allowing occupants time to evacuate safely.

Ensuring that firestopping solutions are installed in accordance with manufacturers’ guidance and test evidence is necessary for protecting both people and property.

As fire safety regulations continue to evolve, the collaboration between Quelfire, Ark Fire Protection, and Bouygues UK reflects a proactive approach to compliance and risk management within the construction sector.

Quelfire and Ark Fire Protection collaborate on fire safety training in London: Summary

Quelfire and Ark Fire Protection have partnered to deliver fire safety training on a Bouygues UK project near Kings Cross, London.

The training covered passive fire protection and aimed to ensure compliance by equipping site staff, site managers, and contracts managers with the necessary skills and knowledge for firestopping installations.

Quelfire states that regular CPD training is important for supporting construction professionals in making informed decisions, particularly for service penetration sealing.

The company’s training covers industry regulations and installation techniques to promote a ‘safety first’ culture.

The partnership between Quelfire, Ark Fire Protection, and Bouygues UK demonstrates the role of collaboration in ensuring fire safety compliance.

Effective communication and quality assurance help prevent installation errors, reduce project delays, and support adherence to regulatory standards.

Passive fire protection plays a critical role in containing fire and smoke, allowing safe evacuation and minimising property damage.

Quelfire highlights the importance of proper installation in reducing fire risks across construction projects.

JELD-WEN achieves BM Trada Q Mark certification for fire doorsets in the UK

by Featured NewsFire DoorsPassive

JELD-WEN expands certified fire doorset manufacturing

JELD-WEN has obtained BM Trada Q Mark certification, enabling the company to expand its production of certified internal fire doorsets.

The UKAS-verified certification confirms that JELD-WEN’s fire doorsets comply with independent third-party certification standards.

As part of this process, the company has designated an area of its Sheffield manufacturing plant specifically for producing BM Trada Q Mark certified fire doors.

The facility will process a wider selection of door cores, allowing for customisation with different finishes, colours, glazing options, and hardware to meet project requirements.

Third-party certification supports expanded product range

JELD-WEN already manufactures its own fire doorsets.

With BM Trada Q Mark certification, it can now fabricate components and parts for other certified manufacturers, ensuring the certification extends to the final product.

This accreditation adds to JELD-WEN’s existing compliance with Certifire and Certisecure standards.

It allows the company to offer an expanded range of doorsets while meeting third-party testing requirements.

Sheffield facility dedicated to certified fire doors

JELD-WEN allocated space within its Sheffield manufacturing plant to focus on BM Trada Q Mark certified fire doors.

The facility is designed to ensure that products meet the required certification standards throughout production.

The site will allow for processing doors with various specifications, including different cores and finishes, to meet diverse project needs.

First certified doorsets produced within nine months

JELD-WEN secured BM Trada Q Mark certification within nine months, with the first certified fire doorsets coming off the production line at the end of January.

Glyn Hauser, Engineering and Innovation Manager at JELD-WEN UK, said: “At JELD-WEN we pride ourselves on achieving the highest safety standards when manufacturing fire doorsets and the gold standard in demonstrating this is through third-party verification.”

Hauser added: “BM Trada upholds the very highest standards across the supply chain.

“By becoming a verified member of the scheme, JELD-WEN can now work with other suppliers also holding BM Trada certification to deliver a wider range of products to meet varied specifications.”

JELD-WEN achieves BM Trada Q Mark certification for fire doorsets in the UK: Summary

JELD-WEN has secured BM Trada Q Mark certification, allowing the UK manufacturer to expand its fire doorset production.

The certification verifies compliance with third-party certification standards.

A section of JELD-WEN’s Sheffield manufacturing plant has been designated for producing BM Trada Q Mark certified fire doors.

This will enable the company to process a wider variety of door cores with different finishes, glazing, and hardware options.

With the certification, JELD-WEN can now fabricate components and parts for other BM Trada Q Mark certified manufacturers.

The company also complies with Certifire and Certisecure standards.

JELD-WEN obtained BM Trada Q Mark certification within nine months, and the first certified fire doorsets were produced in January.

Engineering and Innovation Manager Glyn Hauser stated that the certification allows the company to work with other certified suppliers to provide a broader range of products.

ROCKWOOL progresses UK expansion with Birmingham facility application

by Featured NewsPassive

Section 73 application submitted to Birmingham City Council

ROCKWOOL has submitted a Section 73 application to Birmingham City Council as part of its plans to develop a manufacturing facility in the West Midlands.

The proposed facility, located at the Peddimore site near Minworth, would expand ROCKWOOL’s supply capacity for customers in the UK and the Republic of Ireland.

The company states that the development aligns with its global sustainability plans.

The Peddimore site already has outline planning permission for manufacturing.

ROCKWOOL’s application seeks to modify specific aspects of the existing permission to accommodate its facility.

If approved, the company plans to submit a Reserved Matters application in late 2025 or early 2026.

Construction timeline and operational plans

If both applications receive approval, construction could begin in 2026, with the facility expected to become operational in 2029.

ROCKWOOL has operated in South Wales since 1979 and aims to expand its UK presence with the proposed plant.

The company states that the facility would enhance production capacity and reinforce its commitment to sustainability.

Community engagement and public consultation

Since announcing its expansion plans in November 2024, ROCKWOOL has engaged with the local community to share information and gather feedback.

The company has completed the first phase of its community engagement programme and plans to hold a second phase once further details and designs are developed.

Nick Wilson, Managing Director of ROCKWOOL UK & Ireland, said: “Since we announced our intentions to expand the business into the West Midlands, we have had an opportunity to share our plans with the community and are very grateful to those who have provided feedback.

“We are taking all feedback into consideration as we develop the plans and have included the community’s observations so far in our Section 73 application to the Council.

“We look forward to meeting with community members again in the coming months.”

Next steps for ROCKWOOL’s Birmingham expansion

ROCKWOOL has stated that information about the development is available at www.rockwool.com/uk/peddimore and will be updated as the proposal progresses.

The company plans to submit a Reserved Matters application following approval of the Section 73 request.

If the necessary permissions are granted, construction is expected to commence in 2026.

ROCKWOOL progresses UK expansion with Birmingham facility application: Summary

ROCKWOOL has submitted a Section 73 application to Birmingham City Council to modify planning permissions for a proposed manufacturing facility at the Peddimore site near Minworth.

The site already has outline permission for manufacturing, and ROCKWOOL aims to adjust details to align with its development plans.

If approved, the company will submit a Reserved Matters application in late 2025 or early 2026, with construction beginning in 2026 and operations starting in 2029.

Since announcing the plans in November 2024, ROCKWOOL has conducted community engagement to share information and gather feedback.

A second phase of engagement is planned as the project progresses.

The company states that updates on the proposal will be available online.

UK fire curtain standards: A1S Fire & Smoke Curtains addresses BS 8524-1 compliance

by Featured NewsPassiveResearch

Clarifying BS 8524-1 in the UK fire curtain industry

A1S Fire & Smoke Curtains has addressed ongoing confusion within the UK fire curtain industry regarding BS 8524-1 compliance following the International Fire Consultants’ (IFC) withdrawal from the standard in June 2023.

According to A1S, some manufacturers and resellers have used this situation to make misleading claims about fire curtain compliance.

The company has collaborated with industry experts to review the situation and provide accurate information on fire curtain standards in the UK.

BS 8524-1 remains the UK’s primary fire curtain standard

BS 8524-1 remains the only UK standard specifically designed for active fire curtains, distinct from BS EN 16034, which covers a broader range of fire barriers, including doors and shutters.

Sweco, an independent building standards consultancy, reviewed the matter and stated: “It is our opinion that fire curtain products with valid third-party certification to BS 8524-1 remain valid beyond the 9 June 2023 date of withdrawal, subject to: no changes in design or manufacturing process, continued ISO 9001 accreditation, and certification validity beyond 2023.”

Sweco’s findings align with guidance from the Association of Specialist Fire Protection (ASFP), which confirmed that BS EN 16034 does not regulate fire curtain deployment speeds, initiation devices, or warning mechanisms, all of which BS 8524-1 covers.

BS EN 16034’s role in fire curtain regulation

While BS EN 16034 is recognised in the European market, it does not replace BS 8524-1 for most fire curtain applications in the UK.

The ASFP clarified that BS EN 16034 applies to various fire and smoke barriers but does not include operational testing for fire curtains.

The standard lacks key testing requirements such as cycle durability tests, barrier assembly reliability, and elevated temperature motor operation tests.

A1S states that using BS EN 16034 alone could introduce risks, as it does not evaluate the operational reliability of fire curtains under sustained use.

Industry response to misleading claims

A1S Fire & Smoke Curtains has warned against unverified claims by certain manufacturers regarding compliance with BS 8524-1.

The company advises industry professionals to verify certification documents, ensure they originate from a recognised notified body, and conduct due diligence when specifying fire curtains.

The Office for Product Safety and Standards (OPSS) has reviewed the applicable fire curtain standards in the UK, aligning with the ASFP, Sweco, and the British Standards Institution (BSI).

Their guidance confirms that BS 8524-1 certification remains valid beyond June 2023, provided products maintain third-party certification, design consistency, and ISO 9001 accreditation.

UK fire curtain standards: A1S Fire & Smoke Curtains addresses BS 8524-1 compliance – Summary

A1S Fire & Smoke Curtains has addressed industry concerns over BS 8524-1 compliance following the IFC’s withdrawal in June 2023.

The company highlights that BS 8524-1 remains the primary UK standard for fire curtains, as confirmed by industry bodies such as Sweco and ASFP.

BS EN 16034, while applicable in Europe, does not cover operational performance criteria essential for fire curtain reliability in the UK.

The OPSS has clarified that BS 8524-1 certification remains valid under specific conditions, reinforcing its continued relevance.

A1S advises professionals to verify certification claims to ensure compliance with recognised standards.

Siderise challenges Kensington and Chelsea building material exclusion in court

by ConstructionFeatured NewsPassive

Judicial review initiated over Siderise product exclusion

Siderise Insulation Ltd has initiated judicial review proceedings against the Royal Borough of Kensington and Chelsea (RBKC).

The company is seeking the withdrawal and reversal of an RBKC decision made on 11 December 2024, which excludes Siderise products from construction projects within the borough.

RBKC’s decision is based on criteria linked to the Grenfell Tower fire.

Siderise argues that the criteria are being applied incorrectly in its case.

The company states that while its products were used in the Grenfell Tower refurbishment, the Grenfell Inquiry Report does not attribute any responsibility to the firm for the fire or its spread.

Siderise challenges basis of RBKC decision

RBKC’s exclusion policy targets companies that the council deems to have engaged in dishonesty, incompetence, or misleading behaviour related to the Grenfell tragedy.

Siderise states that the Grenfell Inquiry found no evidence of dishonesty or incompetence on its part.

The company contends that RBKC’s decision is unjustified and does not align with the inquiry’s findings.

Protecting company reputation and industry role

Siderise has positioned itself as a supplier of external passive fire protection products and states that it has worked to improve industry standards since the Grenfell fire.

The company emphasises that the exclusion by RBKC affects its reputation and its ability to provide fire protection solutions in the UK and internationally.

RBKC has acknowledged that some companies were excluded from the decision due to a lack of evidence of wrongdoing.

Siderise argues that it should fall within this category.

Siderise reaffirms commitment to building safety

Despite the legal proceedings, Siderise has stated that it remains committed to advancing building safety through its products, systems, and services.

The company continues to work towards higher industry standards and compliance.

Siderise has framed its challenge against RBKC as an effort to protect its standing as a British manufacturer supplying fire safety solutions worldwide.

Judicial review initiated over Siderise product exclusion: Summary

Siderise Insulation Ltd has launched judicial review proceedings against the Royal Borough of Kensington and Chelsea following a decision on 11 December 2024 that excludes its products from construction projects in the borough.

The exclusion is based on criteria linked to the Grenfell Tower fire.

Siderise argues that the Grenfell Inquiry Report does not support the exclusion, as there was no finding of dishonesty, incompetence, or misleading behaviour by the company.

RBKC has stated that some companies were not included in its exclusion policy due to a lack of evidence against them, and Siderise believes it should be among them.

The company is taking legal action to challenge the decision and protect its reputation.

Siderise has stated that it remains focused on building safety and supporting industry standards through its products and services.

Fire protection guidance for data centres now available in multiple languages

by ActiveFeatured NewsPassiveSafety

Euralarm expands data centre fire safety guidance

Euralarm has released Dutch, German, and Spanish versions of its guidance document on fire protection systems for data centres.

The document outlines key considerations for selecting fire protection systems and details the available options for safeguarding data centres.

Fire safety considerations for data centres

Data centres house expensive equipment and critical data, making fire protection a priority.

The Euralarm guidance explains how protection objectives can vary depending on the client and region.

It provides an overview of different fire suppression technologies, including sprinklers, water mist, gaseous suppression, oxygen reduction, and condensed aerosols, along with their suitability for different fire scenarios.

Target audience for the guidance

The document is designed for data centre designers, operators, and fire protection professionals.

It assumes that readers understand the importance of fire safety and seek clarity on the implications of choosing one fire suppression method over another.

It includes insights on standards, regulations, and the impact of fire protection strategies on business continuity.

Guidance tailored to specific applications

The document does not prescribe a one-size-fits-all approach but helps stakeholders assess different fire protection solutions based on their specific needs.

It aims to support decision-making beyond minimum legal requirements, taking into account business continuity and asset protection.

Fire protection guidance for data centres now available in multiple languages: Summary

Euralarm has published Dutch, German, and Spanish versions of its guidance document on fire protection systems for data centres.

The document explains considerations for selecting fire suppression technologies, addressing varying protection needs across different regions.

It provides information on suppression methods, including sprinklers, water mist, gaseous systems, oxygen reduction, and condensed aerosols, outlining their effectiveness at different fire stages.

Targeted at data centre designers, operators, and fire protection professionals, the guidance document helps stakeholders evaluate fire safety strategies based on their specific applications.

It also discusses the role of fire protection in business continuity planning.