Global fire suppression systems Market to reach $26.6 Billion by 2027

by ActiveBreaking News

The global market for Fire Suppression Systems is estimated at US$19 Billion in the year 2020, is projected to reach a revised size of US$26.6 Billion by 2027, growing at a CAGR of 4.9% over the analysis period 2020-2027.

Dry Chemical-Based, one of the segments analyzed in the report, is projected to grow at a 5.6% CAGR to reach US$10.8 Billion by the end of the analysis period.

After an early analysis of the business implications of the pandemic and its induced economic crisis, growth in the Water-Based segment is readjusted to a revised 4.6% CAGR for the next 7-year period. This segment currently accounts for a 28.7% share of the global Fire Suppression Systems market.

The U.S. Accounts for Over 29.7% of Global Market Size in 2020, While China is Forecast to Grow at a 6.7% CAGR for the Period of 2020-2027

The Fire Suppression Systems market in the U.S. is estimated at US$5.6 Billion in the year 2020. The country currently accounts for a 29.69% share in the global market. China, the world second largest economy, is forecast to reach an estimated market size of US$3.8 Billion in the year 2027 trailing a CAGR of 6.7% through 2027.

Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at 3.5% and 4.2% respectively over the 2020-2027 period. Within Europe, Germany is forecast to grow at approximately 4.1% CAGR while Rest of European market (as defined in the study) will reach US$3.8 Billion by the year 2027.

Other Product Types Segment Corners a 32.6% Share in 2020

In the global Other Product Types segment, USA, Canada, Japan, China and Europe will drive the 4.1% CAGR estimated for this segment. These regional markets accounting for a combined market size of US$4.9 Billion in the year 2020 will reach a projected size of US$6.5 Billion by the close of the analysis period.

China will remain among the fastest growing in this cluster of regional markets. Led by countries such as Australia, India, and South Korea, the market in Asia-Pacific is forecast to reach US$3 Billion by the year 2027, while Latin America will expand at a 4.9% CAGR through the analysis period.

CertAlarm completes fourth cycle of round-robin tests

by Featured NewsSafety

CertAlarm, an organization offering a pan-European quality mark in the fire protection and security systems industry, today confirmed the completion of its 4th cycle of round-robin test series.

Round-robin tests are comparative tests performed by the participating laboratories at regular intervals and using the same test sample. As such they are an important monitoring tool for CertAlarm’s partners and recognized test laboratories. They enable quality supervisors and management to place the results obtained by the laboratory performing the tests in a wider framework and to identify problems and initiate actions for improvement.

In particular, round-robin tests help to bring to light inconsistencies in the testing systems or methods and can give rise to necessary corrective action, e.g.:

  • interpretation of standards,
  • calibration/maintenance of the testing equipment,
  • training of the laboratory personnel,
  • adjustment of influencing factors relevant to testing (e.g. climate).

“In order to improve our program we specifically select tests which have proven to be difficult to perform or have shown in the market place that inconsistencies exist in approved products. One of the tests selected for this cycle’s series was therefore the measurement of the make and break distances of opening contacts according to EN 50131-2-6 (clause 6.4.2). The criticality of this test lays in the interpretation of the PASS/FAIL criteria in coherence with the manufacturer declaration and the requirements in clause 4.3.1.2 and 4.3.1.3.”, says Benoît Stockbroeckx, Technical Manager of Euralarm and Chair of CertAlarm’s Technical Advisory Group (TAG).

“As a matter of fact, diverging interpretations highlighted unclarity in the wording of the standard. This issue has been brought to the relevant standardisation working group (CLC/TC 79/WG 2) and the discussions paved the way for an improvement of the standard in view of a future revision. Thanks to this exercise we can now be sure that all of CertAlarm’s labs will test and conclude according to this understanding in the future. Moreover, CertAlarm so contributed to the improvement of the standard for the benefit of all European laboratories, certification bodies and manufacturers dealing with opening contacts”, he adds.

“The round-robin procedure helps us understand if we are doing things right and providing our customers the same level of results”, confirms Anja Kinsky, General Manager of CertAlarm.

Rhino Doors expands with EV charging point installations

by Featured NewsSafety

UK-based engineered doors manufacturer Rhino Doors is strengthening its commitment to its people and the environment with the installation of electric vehicle charging points at one of its manufacturing facilities.

Rhino Doors, whose main base is in Port Talbot, South Wales, installed the charging points to encourage its team members to adopt the use of electric vehicles (EV), and to support clients visiting the facility via an EV.

By providing its team with the facilities to charge their vehicles at work, Rhino is working to offset its carbon footprint and mitigate negative impacts on the environment.

This new initiative comes after the manufacturer completed Made in Britain’s Green Growth Programme in February of this year, scoring highly for social impact and green credentials.

The Green Growth Programme is designed to support UK manufacturers to advance their progress on sustainability and work towards reaching net zero by 2050 or earlier.

In January of this year, Rhino also published its strategy on Corporate Social Responsibility, outlining the ways in which it is working to prioritise both people and planet.

Spanning the key areas of Environment, Community, Workplace & People, and Marketplace, the company’s CSR strategy details a range of initiatives it has implemented to positively impact on local communities and the wider environment.

Stuart Lawrence, Group Managing Director of Rhino Engineering Group, said: “As a manufacturer of industrial doors, we know that the intensive work we undertake can have an impact on the environment and the people around us.

“We’re very proud to have been recognised by Made in Britain for our continued efforts to minimise our environmental impact and work towards carbon neutral operations.

“This new initiative is just one small way in which we are working to implement sustainable practices and bolster our ethical standing with all our stakeholders.”

Dräger launches compact thermal imaging camera

by Featured NewsProductsThermal Imaging

Dräger, an international leader in the fields of medical and safety technology, has launched the UCF FireVista, a thermal imaging camera (TIC) that can be activated one-handed with just one button, providing split-second access to critical visual support within a firefighting incident.

TICs provide vital insight when visibility is significantly reduced due to fire, smoke or darkness, thereby supporting firefighters whilst attending the most challenging environments. They deliver vital intelligence in locating casualties and helping locate the seat of a fire, so that it can be rapidly extinguished.

With the ability to detect even the smallest change in temperature, and providing a clear contrast between walls, doors and stairs, the UCF FireVista proves especially useful in detecting hotspots when a fire is behind cladding or in a building’s void. It therefore limits invasive physical damage as emergency teams have less need to strip out the fabric of a building to reach the fire.  

The UFC FireVista is compact, robust and features an ergonomic design and almost indestructible outer shell. It can withstand mechanical stresses and its IP67 protection class guarantees that is water and dust resistant. A fast frame rate and ultra-high image picture quality deliver a quick overview of an incident even under the most difficult operating conditions.

Weighing only 870g, the UFC FireVista is one of the lightest thermal imaging cameras currently on the market. This helps increase the mobility and reduce the physical strain placed on the firefighter.

The camera has an operating time of approximately five hours, due to its powerful rechargeable battery, which gives enough leeway for longer deployments. The camera is virtually maintenance-free, and the integrated battery has a lifetime of approx. 4000 charging cycles.

The compact and intuitive camera is easy to use and operate, with just one on/off switch, which means it can deliver vital information in seconds. 

Liz Millward, Marketing Manager Emergency and Rescue Services at Draeger Safety UK, says the UFC FireVista is an excellent addition to the range: “Dräger’s thermal imaging cameras are designed to supply firefighters with vital information during any incident where visibility is impaired, whether as a result of smoke or an underground or collapsed environment. The UFC FireVista is an important tool when speed, straightforward functionality and high-quality imaging are required,” she says. 

“Ultimately, it supports firefighters’ ability to save the lives of others and to protect their own safety.”

Steel Family Holdings acquires Fire Detection Devices

by Breaking NewsFire DetectionProducts

Canadian-based Steel Family Holdings (SFH) has acquired Fire Detection Devices Ltd.

Fire Detection Devices Ltd. has offered heat detection solutions for over 50 years, and includes the most reliable spot-type heat detectors on the market today. For many in the fire alarm industry, conventional heat detectors are easily recognized by their distinctive heat collecting disc. This design was the brainchild of Jack Duggan. In 1962, Jack incorporated Fire Devices Manufacturing Limited, and began manufacturing his patented design. The “Thermoflex” brand has been made in Canada, by Canadians ever since.

“I am thrilled to have the opportunity to bring Fire Detection Devices Ltd., a known and trusted Canadian brand, into the SFH group of companies”, said Jason Steel, President. “Our goal with this new venture is to build on the legacy of this industry pioneer, by investing in the original patented heat detector, to make it even more accessible to the market.”

“The past two years have been challenging for those in the manufacturing sector,” said Patricia Duggan, President of Fire Detection Devices. “This shift in the landscape inspired us to find someone who could carry on the work our father, Jack Duggan began over sixty years ago. We feel very fortunate to have met Jason Steel, and we believe SFH will not only continue to produce quality heat detectors but will take Jack’s vision to another level.”

Over the last 5 years SFH has acquired Serva-Lite Sales, SOTA Battery and Battery2000. The company continues to maintain the highest level of service and product quality, growing the business of customers across Canada and throughout North America and other export markets.

London warns against home fires to save on heating

by Featured NewsSafety

Fire chiefs in London have warned the public that should not attempt to reduce their energy bills by improvising open fires at home.

The caution comes after a man in south-west London set fire to his property by burning timber in his living room to keep warm. The man was trying to avoid putting on the central heating in his home, fire investigators said.

Fuel poverty campaigners said the incident – one of at least 100 involving open fires, log burners and heaters in the capital in the last few months – laid bare “the harsh and dangerous reality of the cost-of-living crisis”.

Issuing an urgent safety warning, the London fire brigade (LFB) said the cause of the blaze on 26 April had been determined as “involving an open fire being used instead of gas central heating.”

It is understood to have also been caused by combustible items too close to an open fire. The London ambulance service said it treated three people at the property in New Malden, with one man being taken to hospital as a priority.

The LFB said there had been more than 100 fires involving open fires, log burners and heaters in the past few months.

It fears the rise in energy bills could result in a surge of fires as people resort to alternative means to heat their homes throughout the colder spells of the year.

Charlie Pugsley, assistant commissioner for fire safety, said: “We know this is a difficult time and people are thinking about ways to reduce their energy bills, but we’re really concerned that they may be putting lives at risk by doing so.

“If you do have a log burner or an open fire, follow our advice carefully. Almost 30% of fires involving log burners, heaters and traditional open fires are caused by items being placed too close to a heat source. Always use a fire guard and keep anything that could catch alight well away, such as logs and kindling which could be ignited by radiating heat.”

Weber Hydraulik secures ISO 14001 and ISO 50001 certifications

by Featured NewsSafety

Rescue equipment manufacturer Weber Hydraulik has secured two crucial environmental and sustainability certifications in ISO 14001 and ISO 50001 at its base in Losenstein, in Austria.

Both certifications comply with environmental guidelines and the efficient use of energy contribute significantly to the sustainable orientation of companies.

“Sustainability is a very important topic for us. We are constantly working on optimizing our processes with regard to the set environmental and energy targets. The ISO 14001 and ISO 50001 certifications now show quite objectively that we meet very high requirements in this regard,” says Günther Rebhandl, Head of Quality Management at WEBER- HYDRAULIK, who is pleased with the success.

Environmental risks can be reduced through sustainable environmental and energy management. At the same time, environmental performance is made transparent and targeted improvement measures are devised. Lower consumption of resources such as energy and water, plus the reduction of disposal costs also offer an economic advantage over the competition in the long term.

Environmentally friendly energy and heating technology

At its site in the Enns Valley, the innovative manufacturer goes far beyond the required measures. Photovoltaic systems installed on the roof of the building provide clean electricity from solar energy. With an output of 364 kWp, part of the electricity used in production is self-generated. “The proportion of electricity requirements that can be covered by solar energy has been continuously increased in recent years,” explains Albert Koppenberger, who is responsible for plant maintenance at the Losenstein site.

The heating system is also powered by wood chips in an environmentally friendly manner. “Our entire heating requirements are covered by the wood chip heating system,” Koppenberger continues. This makes the Losenstein site independent of oil and gas.

E-mobility reduces CO2 emissions

In March 2019, it was discovered that transportation causes a large part of the CO2 pollution at the Losenstein site. “By using e-mobility for work trips, we saw great potential to reduce the site’s CO2 emissions. That was the starting signal for the e-mobility campaign,” says Koppenberger. An attractive leasing model for e-cars was worked out for employees at the Losenstein site. In the meantime, around 70 employees have taken advantage of the campaign. The electricity required for the e-cars also comes from the company’s own photovoltaic system. Employees can charge their vehicles free of charge at the 20 newly installed charging points.

“Passing the certifications once again proves the consistently high quality orientation as well as the environmentally friendly and energy-efficient design of all processes in the company,” confirm Kurt Sperrer and Bernhard Obermayr as managing directors at the Losenstein site. “We are convinced that we can also offer our customers a decisive advantage with our sustainable orientation.”

Magirus completes delivery of 17 fire engines to Austria’s Provincial Fire Brigade

by Breaking NewsProductsVehicles

During the Florianifeier festivity on 4 May 2022, the Provincial Fire Brigade Association of Lower Austria received 17 new Magirus tank pumpers for wildfire applications

The handover was completed in the presence of Provincial Fire Brigade Commander Dietmar Fahrafellner, Diocesan Bishop Dr. Alois Schwarz, Federal Minister Karoline Edtstadler and Deputy Provincial Governor Dr Stephan Pernkopf,

“Climate change is increasingly bringing new demands to the fire service. Vegetation fires are increasing in severity and number and are placing particularly higher demands for the population, for the fire brigades and their equipment. Often, the areas of operation are difficult to access, water sources are not available or hardly accessible and the permanent unpredictability of the fires poses an additional danger”, explains Josef Huber, the Provincial Technology councillor for the Lower Austrian fire brigade association.

The new vehicle concept for the “Forest Firefighting Vehicle”, HLF2-WB, is based on the current existing recommendations for forest firefighting vehicles – coupled with the requirements of the HLF2 according to the construction guidelines of the Lower Austrian Fire Brigade Association, in order to achieve the highest possible benefit and operational utility in everyday use. The main differences to the standard HLF2: all-terrain chassis, extensive equipment which is specially designed for forest fighting and vegetation fires, midship-pump configuration in conjunction with a self-protection extinguishing system, additional heat-protection for aggregates, a cabin with roll-over protection as well as a modular designed interior to increase multiple use of the vehicle.

The ” fast attach vehicle” VFA is built on a Ford Ranger with an innovative exchangeable modular structure. In the basic configuration, a vegetation firefighting module is equipped with tank, centrifugal pump and engine-unit and forest firefighting equipment. The simple module change, the storage possibility and respectively the flexible worktable is realized with a multi-adjustable, mobile work/logistics module. Besides to the forest firefighting module, one of the vehicles is equipped with a commander-module.

The HLF2-WB are equipped with a Treibmatic winch and the VFA are equipped with an electric winch.

With these vehicles, in addition to the forest fire QUAD’s already in service, the Provincial Fire Brigade Association has now a complete and consistent forest firefighting unit, which has already been used in the firefighting operation in Hirschwang an der Rax (district of Neunkirchen). On this occasion, the vehicles have already passed a successful baptism of fire.

“It’s a special honour that the vehicle concept literally met the requirements even before the official ceremonial handover. Now, we can book a follow-up order for additional 8 HLF2-WB and 8 VFA vehicles”, states Christian Reisl, Managing Director of Magirus Lohr GmbH.

Construction Industry Council welcomes Building Safety Act

by Featured NewsSafety

The Construction Industry Council (CIC) welcomes the Building Safety Act, which received Royal Assent today. CIC and its membership of the professional bodies across the built environment have been liaising with officials at DLUCH (Department for Levelling Up, Housing and Communities) since the Grenfell tragedy in 2017. CIC has provided input, representing our membership, into the Hackitt Review, the draft bill and the Bill which has, amongst other things, sought to implement her recommendations.

CIC is also particularly pleased that the establishment of a New Homes Ombudsman is taken forward in the Act, since this implements the main recommendation from the ‘More Homes, fewer complaints’ report.

The Act represents a paradigm shift in the way in which residential buildings are to be designed, built, managed and regulated. However, despite the scale of the Act (262 pages) and the vast number of amendments that have been made to it, there is still a great deal of detail to be determined through secondary legislation which CIC and its members stand ready to further assist government by providing expert opinion to enable government to get this detail right.

One issue that needs to be addressed is that, despite the five years that have elapsed since Grenfell, the wider industry is still ill-prepared for the changes to come. In tandem with the transitional period of 18-24 months for the implementation of secondary legislation there needs to be a considerable communication exercise to create the necessary culture change in the industry and to absorb the new regulatory regime.

CIC especially welcomes the specific focus on improving competence across all sectors engaged in the design, construction, maintenance, management and regulation of residential buildings. This carries forward the work of the Competence Steering Group that CIC has hosted over the past four years. CIC will continue to work closely with colleagues in the construction, built environment, fire safety and building owner/manager sectors to continue our engagement with the interim Building Safety Regulator and the Interim Industry Competence Committee.

Whilst welcoming the Act, which has taken two years since the publication of a draft bill in 2020, CIC has a number of reservations about the extensive changes that have been made during the passage of the bill. In particular, the holistic process recommended by Dame Judith Hackitt has been cherry-picked*. (Note 3) In some regards, her recommendations have been expanded upon (for example, in relation to scope, which we welcome) and in others they have been watered down and her rounded approach to achieving building safety has been impacted.

The last-minute change of heart about the statutory requirement to appoint a Building Safety Manager is a prime example of this break from the Hackitt recommendations. The role has been removed but the functions to ensure the building safety of residents remain and the idea that the cost of providing building safety management of occupied buildings, in scope to the Act, will not fall on the residents is unlikely to be the case, irrespective of whether there is a duty to appoint a Building Safety Manager.

CIC also remains concerned about the impact of extended liability under the Act, including for any works to dwellings (whether higher risk or not), and under the s38 of the Building Act. It is particularly concerned about extending the period of liability under the Defective Premises Act from six to thirty years and retains the belief that such a period of retrospective strict liability is unworkable for practical and contractual reasons. This amendment is likely to further exacerbate an already uncertain market for professional indemnity insurance (PII).

The PII market for construction-related activity in general and any work on high-rise residential buildings, in particular, is already far too weak to meet demand and there is adequate data to show that businesses are leaving the marketplace as a result. This is a major problem that requires urgent government intervention to enable businesses to continue to be able to carry out work on the design, construction and management of high-rise residential buildings and more widely, on fire risk and building safety work. Taken together with the rising cost of building work, particularly in relation to construction product availability and inflation, this will have a constraining impact on the industry’s ability to meet housing demand, especially affordable housing. This is a matter that the Treasury will need to consider very carefully.

Third UK fire service convoy on its way to Ukraine

by ActiveFeatured News

The third convoy of UK fire service kit and equipment is now on its way, providing vital life-saving equipment to firefighters in Ukraine.

These monumental ‘mega’ convoys are the culmination of a number of weeks of incredible hard work and planning to ensure support is being given by the UK.

This means an amazing 60 fire vehicles – packed with hoses, helmets, thermal imaging cameras, generators, ladders, rescue equipment and protective equipment and other kit requested by Ukraine – have now been donated by UK fire and rescue services and the wider fire sector.

Organised by UK charity FIRE AID and International Development, the National Fire Chiefs Council (NFCC), EASST, and the wider fire industry, the convoys have also been supported by the Home Office and other government departments.

As well as kit and equipment being donated by fire and rescue services, the convoy has been joined by a fully kitted out mechanical team – provided by the fire sector – to ensure vital support to ensure its safe passage to Poland.

22 vehicles have left UK shores today and are on their way to Poland, where the kit will be handed over to Ukraine via the Polish State Fire Service.

The first convoy left in mid-March, the second one set off on April 21st and the third convoy has now left.

These donations of firefighting equipment – which has been requested by Ukraine – will help its fire and rescue service as they continue their life-saving work in the most difficult conditions imaginable.

Over one hundred fire stations and two hundred and fifty fire engines have been destroyed in Ukraine with a number of firefighters tragically losing their lives as they battle to protect their country.

The deployment of these donations is being supported by funding from the Home Office, Foreign, Commonwealth & Development Office, and the FIA Foundation.

The wider fire sector – including the MSA Safety, Fire Sector Federation (FSF), the Fire and Rescue Suppliers [FIRESA] Council and the Fire Industry Association (FIA) – are key partners in supporting and making the deployment.   

Chair of the National Fire Chiefs Council, Mark Hardingham commented: “Once again we have seen fire and rescue services, FIRE AID and the wider sector work together to make this happen. The situation in Ukraine remains at the forefront of everyone’s mind and to be able to assist is something everyone involved should be incredibly proud of.”

Ian Moore, Chief Executive, Fire Industry Association: “This third convoy has been the culmination of incredible partnership working, with everyone coming together to support this convoy. The wider fire sector is proud to have played its part in supporting this – a truly collaborative humanitarian response from the UK to assist those who need our help the most.”

Claire Hoyland, FIRE AID Project Manager said: “When we started collecting equipment six weeks ago, I could never have imagined the scale of the response. Everybody wanted to help. The deployment of 60 vehicles has been an incredible achievement by all involved but I must acknowledge our FIRE AID members EASST and Kent Fire and Rescue who have been working in Ukraine now for 10 years. The relationships that we have built up with in this time have been critical to the successful deployment of these convoys. For us, this is about more than just helping firefighters in a time of desperate need. It is also about helping friends and colleagues who have found themselves on the frontline of a war.”

Lord Greenhalgh, Fire Minister, said: “I am proud to see a further convoy of fire service kit on its way to Ukraine to provide vital support to the Ukrainian firefighters for the third time in less than two months. It is truly a great demonstration of hard work by civil servants, the UK’s fire and rescue services, the NFCC and FIREAID.”