South Williamsport Fire Department fire deal considered ‘revolutionary’

Officials involved in a proposed five-year cooperative agreement with Loyalsock Township and its fire department have labeled it as ‘revolutionary’ and one that could incorporate future municipal partners to provide fire and rescue services for their communities.

South Williamsport Borough Council in Pennsylvania approved the proposal earlier this week and township supervisors continue to review it as minor revisions get ironed out.

The agreement, a copy of which was provided to the Sun-Gazette, includes provisions for paid fire protection and rescue services that funds the departments and apparatus and equipment through existing fire taxes.

Under the banner of Susquehanna Mutual Aid Regional Team, or SMART, the dwindling manpower of the South Williamsport Volunteer Fire Department was given new legs this week.

The cooperative fire agreement, meanwhile, creates a legal mechanism to provide sufficient funding to the participating fire companies from participating municipalities and other third party sources, he said.

SMART will begin with an initial paid staff of five fully trained firefighters and rescue responders consisting of four full-time, 40-hour-per-week positions, Monday through Friday, with one shared administrative position providing the administrative oversight for the services administered under the SMART program, according to the terms, the SunGazette reported.

The four full-time positions will be assigned into two separate firefighter crews, with one crew to be stationed at Loyalsock Township, and with one crew to be stationed at South Williamsport Volunteer Fire Department.

The agreement provides necessary personnel, training, and equipment required to supplement the participating fire companies with paid firefighters that will provide for adequate paid fire protection and rescue services within the participating municipalities.

Global fire suppression systems Market to reach $26.6 Billion by 2027

The global market for Fire Suppression Systems is estimated at US$19 Billion in the year 2020, is projected to reach a revised size of US$26.6 Billion by 2027, growing at a CAGR of 4.9% over the analysis period 2020-2027.

Dry Chemical-Based, one of the segments analyzed in the report, is projected to grow at a 5.6% CAGR to reach US$10.8 Billion by the end of the analysis period.

After an early analysis of the business implications of the pandemic and its induced economic crisis, growth in the Water-Based segment is readjusted to a revised 4.6% CAGR for the next 7-year period. This segment currently accounts for a 28.7% share of the global Fire Suppression Systems market.

The U.S. Accounts for Over 29.7% of Global Market Size in 2020, While China is Forecast to Grow at a 6.7% CAGR for the Period of 2020-2027

The Fire Suppression Systems market in the U.S. is estimated at US$5.6 Billion in the year 2020. The country currently accounts for a 29.69% share in the global market. China, the world second largest economy, is forecast to reach an estimated market size of US$3.8 Billion in the year 2027 trailing a CAGR of 6.7% through 2027.

Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at 3.5% and 4.2% respectively over the 2020-2027 period. Within Europe, Germany is forecast to grow at approximately 4.1% CAGR while Rest of European market (as defined in the study) will reach US$3.8 Billion by the year 2027.

Other Product Types Segment Corners a 32.6% Share in 2020

In the global Other Product Types segment, USA, Canada, Japan, China and Europe will drive the 4.1% CAGR estimated for this segment. These regional markets accounting for a combined market size of US$4.9 Billion in the year 2020 will reach a projected size of US$6.5 Billion by the close of the analysis period.

China will remain among the fastest growing in this cluster of regional markets. Led by countries such as Australia, India, and South Korea, the market in Asia-Pacific is forecast to reach US$3 Billion by the year 2027, while Latin America will expand at a 4.9% CAGR through the analysis period.

Exclusive: Jonathan O’Neill, managing director, Fire Protection Association

Jonathan O’Neill OBE, managing director, FPA is a key figure in the UK’s efforts to keep its residents and buildings safe. In an exclusive chat with IFSJ, O’Neill speaks about the building safety bill, and what more needs to be done

The Fire Protection Association has existed in the UK for several decades, and has strived to identify the dangers of fire and help companies and developers reduce fire-related risks. At the heart of the organization is the FPA’s managing director Jonathan O’Neill OBE who completes three decades within the organization this year.  

“I joined the Loss Prevention Council (LPC) after working in insurance for eight years before that with Lloyd’s,” O’Neill tells International Fire and Safety Journal.  

Prior to it being an independent body, the FPA was a department in the LPC. “I took over the department, which was called the Fire Protection Association, a name which had disappeared over the years but still held a lot of gravitas in the sector. In 1997, the insurers decided to dispose of the LPC but they retained the FPA.” 

O’Neill’s mission was to give the FPA a new persona, away from the LPC as it moved forward with maintaining its aim of safety and fire protection in the country. “It wasn’t a commercial organisation and the early days were quite tough as we relied on levies from the insurers for the first 18 months. Thereafter we took a slight commercial direction. We are a not-for-profit organization and invest everything back into our activities.” 

O’Neill says the firm initially had a turnover of GBP1million in the early days. Last year, the FPA’s turnover was GBP12 million. “There was a surge and uptick of our services in the immediate aftermath of Grenfell.” For the immediate future, O’Neill forecasts a steady growth in revenue as its services continue to be in demand.  

Fire assessments and the Fire Safety Bill 

The Fire Safety Act 2021 was an act of the Parliament of the United Kingdom which arose out of the 2017 Grenfell Tower fire and relates to fire safety in buildings in England and Wales with two or more domestic residences, making changes to the Regulatory Reform Order (Fire Safety Order) 2005. 

“The Fire Safety Order was piecemeal, and it was rightly accused of being retrospective i.e. after every tragedy we would start to see a change in fire and safety law.”  

O’Neill is satisfied that the act incorporated two major changes. These are: “We have now got a situation where the fire risk assessment can look at the entire building, which is good. Secondly, we will start to see external assessment being part of that. Through the horrors of Grenfell, we have seen if a risk assessment doesn’t look at the entire building structure it can lead to serious problems.” 

 However, the act doesn’t consider third party accreditation of fire assessments. Expressing his concern on the matter, O’Neill says: “There a reluctance to accept that a fire risk assessor needs to have proper accreditation and a third-party accreditation. As it stands, anyone in the industry can set themselves up as a fire risk assessor and get work.  

Based on the barrister’s opinion the FPA suggestion to the government was: “Rather than making it a statutory duty to add third party assessments. What if we made it a statutory defense in law? This means that if you use a third-party assessment, all parties are protected by the full extent of the law, should something go wrong,” O’Neill tells IFSJ. It’s a practice where the assessors are being assessed in a constant loop of following the best practice through legislation.  

 “It boils down to a fundamental issue in safety. The gas industry managed to sort this issue out a few years ago. For instance, you cannot touch a gas appliance in a commercial or residential premise unless you are Gas Safe, which is a third-party accredited scheme.” 

A change in regulation 

Five years on from the Grenfell disaster O’Neill wants a fundamental root and branch review of building regulations in the UK as it’s well over a decade since the last review. “Building methods have evolved dramatically over the last decade, we are using different materials which are combustible. This will not change over the next 20 years because some of it ties into the sustainability agenda. In the years to come, we will continue to build with even more combustible products because they have less impact on the environment. We accept that. At the same time, we need to re-write some of the building rules, which were done keeping old fashioned building materials and techniques.” 

O’Neill recounts a fire that tore through a Cheshire care home a few years back. The largely timber frame of the building decimated the care home as it spread rapidly. Luckily there were no fatalities since the residents were mostly outside on a warm sunny day. “A massive disaster was averted, thanks to vigilant staff and fire rescue personnel, although the residents lost their belongings. 30 years ago, these fires would be inspected by the Inspectorate of Fire with a recommendation to investigate the building regulations.” 

O’Neill points out that the government and various bodies have done a great job in bringing down the number of fatalities caused by fires. “Over three decades ago, when I started in this industry there were approximately 800 fatalities due to fires in the UK every year. The government and the fire and rescue services have done a tremendous job in bringing those numbers down by about 75%.” 

At no point, O’Neill says, can the issue be taken for granted. The Grenfell disaster highlighted several flaws in building regulations and a lack of competent fire assessments.  

“We cannot assume that fire is no longer a problem,” he reiterates.  

Then there’s the Building Safety Bill which aims to reform the safety system for residential properties by appointing a Building Safety Regulator, giving a greater voice to residents, driving industry change, and creating a national framework for increased oversight. 

The Building Safety Bill is a step in the right direction and O’Neill feels despite its limitations it’s a welcome move. “The Building Safety Bill is limited in what it can do, since it looks at high rise buildings. It is at least bringing in a different regime for looking at building regulation. The Building Safety Bill was the absolute need of the hour. But we need a different building regulation that is reviewed on a regular basis because we are changing the way we build.” 

Building safety scandal 

O’Neill has also welcomed the government’s move to address the building safety scandal. In April 2022, Westminster, revealed a wide-ranging agreement that will see industry contribute £5 billion to address and fix various issues in buildings.  

Under the new agreement, which will become legally enforceable, over 35 of the UK’s biggest homebuilders have pledged to fix all buildings 11 metres+ that they have played a role in developing in the last 30 years. 

In what is considered a victory for leaseholders, Levelling Up Secretary Michael Gove has agreed a solution with the housing industry that will see developers commit a minimum of £2 billion to fix their own buildings. Industry will also pay up to a further £3 billion through an expansion to the Building Safety Levy. 

“This is a great move because leaseholders shouldn’t pay for these repairs. Those responsible for putting sub-standard fire protection should be held accountable. My concern is the route to getting the payment organized. It is up to the government to ensure that all of this is properly enforced, and the monies are properly paid.” 

O’Neill believes that leaseholders should not be held at ransom and the government can do more to help them. He suggests that the government can fund the repairs immediately, while the authorities chase payments from responsible parties. 

“Looking back at the evidence we have seen from the Grenfell Tower Inquiry, the building regulation system was the responsibility of the government, and they took their eye off the ball. This means leaseholders, through no fault of their own, bought properties that were unsafe, and did not comply with regulation.” 

A unified building code 

O’Neill has long advocated a unified set of building codes that can cover the devolved governments as well. “We can learn a lot from the efforts of the devolved governments (in the UK), and how they move on certain matters pertaining to fire prevention. For instance, mandatory suppression and detection enforced from a legislation standpoint can make a huge difference. When I first started in fire, Scotland had a requirement to put sprinklers in single-storey retail spaces. England followed only two to three years later. 

“Britain has one of the most innovative fire protection systems’ industry in the world. And manufacturers are always pushing the evolution in creating new products and systems. But the industry needs support from the government. It’s not enough to only have the highest manufacturing, testing, and certification standards. We need regulatory backing. We can learn from the devolved governments who are leading the way ever so often.” 

The future 

The future is bright for those working towards fire protection in the UK. “We are going to see a different level of scrutiny on building safety after the Building Safety Bill and the Fire Safety Act (come into full effect). There’s going to be a greater emphasis on compartmentation which is welcome. We are launching a fire compartmentation and door survey tool at FIREX in May 2022.  

“We also have some great developments in our laboratory, we are installing some equipment that allows us to improve fire door penetration tests. It gives some much-needed capacity to the market which now is quite busy.” The FPA plans on continuing its growth efforts over 2022 and into the future with surplus funds invested into ensuring that “we have a safer and more resilient built environment going forward.” 

In conclusion O’Neill feels fire is a great career option and must do everything to attract new talent. “There is a lack of awareness of fire as a lucrative career option. The industry has been slow in terms of adopting professional standards, adopting the right university courses, and national occupational standards to support the industry. For long we have been training people on the job without necessary accreditation. For many years now the new generation has not come through and we have a gap which needs to be filled by competent people. 

Today, the demand is high for passionate and qualified people who can work in the laboratory, or as assessors, trainer, and consultants.  

CertAlarm completes fourth cycle of round-robin tests

CertAlarm, an organization offering a pan-European quality mark in the fire protection and security systems industry, today confirmed the completion of its 4th cycle of round-robin test series.

Round-robin tests are comparative tests performed by the participating laboratories at regular intervals and using the same test sample. As such they are an important monitoring tool for CertAlarm’s partners and recognized test laboratories. They enable quality supervisors and management to place the results obtained by the laboratory performing the tests in a wider framework and to identify problems and initiate actions for improvement.

In particular, round-robin tests help to bring to light inconsistencies in the testing systems or methods and can give rise to necessary corrective action, e.g.:

  • interpretation of standards,
  • calibration/maintenance of the testing equipment,
  • training of the laboratory personnel,
  • adjustment of influencing factors relevant to testing (e.g. climate).

“In order to improve our program we specifically select tests which have proven to be difficult to perform or have shown in the market place that inconsistencies exist in approved products. One of the tests selected for this cycle’s series was therefore the measurement of the make and break distances of opening contacts according to EN 50131-2-6 (clause 6.4.2). The criticality of this test lays in the interpretation of the PASS/FAIL criteria in coherence with the manufacturer declaration and the requirements in clause 4.3.1.2 and 4.3.1.3.”, says Benoît Stockbroeckx, Technical Manager of Euralarm and Chair of CertAlarm’s Technical Advisory Group (TAG).

“As a matter of fact, diverging interpretations highlighted unclarity in the wording of the standard. This issue has been brought to the relevant standardisation working group (CLC/TC 79/WG 2) and the discussions paved the way for an improvement of the standard in view of a future revision. Thanks to this exercise we can now be sure that all of CertAlarm’s labs will test and conclude according to this understanding in the future. Moreover, CertAlarm so contributed to the improvement of the standard for the benefit of all European laboratories, certification bodies and manufacturers dealing with opening contacts”, he adds.

“The round-robin procedure helps us understand if we are doing things right and providing our customers the same level of results”, confirms Anja Kinsky, General Manager of CertAlarm.

Sustainable building materials could lead to more fires

The increase of sustainable building materials during construction has been welcomed by many environmentally concious. However, the use of certain products, while good for the environment, pose a higher risk of catching fire.

Jonathan O’Neill, Managing Director, Fire Protection Association told IFSJ in an exclusive interview: “Building methods have evolved dramatically over the last decade, we are using different materials which are combustible.

“This will not change over the next 20 years because some of it ties into the sustainability agenda. In the years to come, we will continue to build with even more combustible products because they have less impact on the environment. We accept that. At the same time, we need to re-write some of the building rules, which were done keeping old fashioned building materials and techniques.”

In Britain, a newly ratified law, the Building Safety Act, came into effect towards the end of April. The new law has been a work in progress fueled by modern fire disasters in the UK.

O’Neill welcomed the new bill but told IFSJ that we now need a fundamental root and branch review of building regulations in the UK. “It’s been well over a decade since the last review,” he said.

Rhino Doors expands with EV charging point installations

UK-based engineered doors manufacturer Rhino Doors is strengthening its commitment to its people and the environment with the installation of electric vehicle charging points at one of its manufacturing facilities.

Rhino Doors, whose main base is in Port Talbot, South Wales, installed the charging points to encourage its team members to adopt the use of electric vehicles (EV), and to support clients visiting the facility via an EV.

By providing its team with the facilities to charge their vehicles at work, Rhino is working to offset its carbon footprint and mitigate negative impacts on the environment.

This new initiative comes after the manufacturer completed Made in Britain’s Green Growth Programme in February of this year, scoring highly for social impact and green credentials.

The Green Growth Programme is designed to support UK manufacturers to advance their progress on sustainability and work towards reaching net zero by 2050 or earlier.

In January of this year, Rhino also published its strategy on Corporate Social Responsibility, outlining the ways in which it is working to prioritise both people and planet.

Spanning the key areas of Environment, Community, Workplace & People, and Marketplace, the company’s CSR strategy details a range of initiatives it has implemented to positively impact on local communities and the wider environment.

Stuart Lawrence, Group Managing Director of Rhino Engineering Group, said: “As a manufacturer of industrial doors, we know that the intensive work we undertake can have an impact on the environment and the people around us.

“We’re very proud to have been recognised by Made in Britain for our continued efforts to minimise our environmental impact and work towards carbon neutral operations.

“This new initiative is just one small way in which we are working to implement sustainable practices and bolster our ethical standing with all our stakeholders.”

Dräger launches compact thermal imaging camera

Dräger, an international leader in the fields of medical and safety technology, has launched the UCF FireVista, a thermal imaging camera (TIC) that can be activated one-handed with just one button, providing split-second access to critical visual support within a firefighting incident.

TICs provide vital insight when visibility is significantly reduced due to fire, smoke or darkness, thereby supporting firefighters whilst attending the most challenging environments. They deliver vital intelligence in locating casualties and helping locate the seat of a fire, so that it can be rapidly extinguished.

With the ability to detect even the smallest change in temperature, and providing a clear contrast between walls, doors and stairs, the UCF FireVista proves especially useful in detecting hotspots when a fire is behind cladding or in a building’s void. It therefore limits invasive physical damage as emergency teams have less need to strip out the fabric of a building to reach the fire.  

The UFC FireVista is compact, robust and features an ergonomic design and almost indestructible outer shell. It can withstand mechanical stresses and its IP67 protection class guarantees that is water and dust resistant. A fast frame rate and ultra-high image picture quality deliver a quick overview of an incident even under the most difficult operating conditions.

Weighing only 870g, the UFC FireVista is one of the lightest thermal imaging cameras currently on the market. This helps increase the mobility and reduce the physical strain placed on the firefighter.

The camera has an operating time of approximately five hours, due to its powerful rechargeable battery, which gives enough leeway for longer deployments. The camera is virtually maintenance-free, and the integrated battery has a lifetime of approx. 4000 charging cycles.

The compact and intuitive camera is easy to use and operate, with just one on/off switch, which means it can deliver vital information in seconds. 

Liz Millward, Marketing Manager Emergency and Rescue Services at Draeger Safety UK, says the UFC FireVista is an excellent addition to the range: “Dräger’s thermal imaging cameras are designed to supply firefighters with vital information during any incident where visibility is impaired, whether as a result of smoke or an underground or collapsed environment. The UFC FireVista is an important tool when speed, straightforward functionality and high-quality imaging are required,” she says. 

“Ultimately, it supports firefighters’ ability to save the lives of others and to protect their own safety.”

SFJ Awards completes 1,000th Operational Firefighter Apprenticeship End-Point Assessment

SFJ Awards reached an important milestone this week, completing its 1000th End-Point Assessment in Fire and Rescue.

End-Point Assessment (EPA) is the crucial last stage of an apprentice’s journey, testing the knowledge, skills and behaviours gained during their training.

Quality assured by Ofqual, SFJ Awards has been an approved independent End-Point Assessment Organisation (EPAO) since 2018 and has been delivering End-Point Assessments for the Operational Firefighter Apprenticeship since 2019.

As an independent End-Point Assessment Organisation, SFJ Awards has conducted EPAs for Fire & Rescue services across the country, including London Fire Brigade and County Durham and Darlington Fire & Rescue.

SFJ Awards’ Head of End-Point Assessment Kit Salt comments: “We feel proud that we have been able to play a part in launching the careers of 1,000 firefighters and counting. The Operational Firefighter Apprenticeship Standard is crucial to the ongoing workforce development for Fire and Rescue Services in England.

“Now, more than ever, recruits need hands-on experience to develop the skills, knowledge, and behaviours to perform the role of an Operational Firefighter competently in order to reassure the public that Fire & Rescue services are keeping them safe.”

A Tyne and Wear Fire & Rescue Service (TWFRS) spokesperson comments: “SFJ Awards have played a vital role in shaping and developing the Firefighter Apprenticeship programme at TWFRS. They have made a huge difference in how we operate our development programme and provide support to us at all stages.
They go the extra mile to ensure our Apprentices are as comfortable as can be whilst carrying out their EPA and this starts in the weeks running up to the EPA.

“Overall SFJ Awards have been great, and I feel the highest compliment I feel you can give about a company is to recommend them to another organisation, I have done this on a number of occasions.”

Steel Family Holdings acquires Fire Detection Devices

Canadian-based Steel Family Holdings (SFH) has acquired Fire Detection Devices Ltd.

Fire Detection Devices Ltd. has offered heat detection solutions for over 50 years, and includes the most reliable spot-type heat detectors on the market today. For many in the fire alarm industry, conventional heat detectors are easily recognized by their distinctive heat collecting disc. This design was the brainchild of Jack Duggan. In 1962, Jack incorporated Fire Devices Manufacturing Limited, and began manufacturing his patented design. The “Thermoflex” brand has been made in Canada, by Canadians ever since.

“I am thrilled to have the opportunity to bring Fire Detection Devices Ltd., a known and trusted Canadian brand, into the SFH group of companies”, said Jason Steel, President. “Our goal with this new venture is to build on the legacy of this industry pioneer, by investing in the original patented heat detector, to make it even more accessible to the market.”

“The past two years have been challenging for those in the manufacturing sector,” said Patricia Duggan, President of Fire Detection Devices. “This shift in the landscape inspired us to find someone who could carry on the work our father, Jack Duggan began over sixty years ago. We feel very fortunate to have met Jason Steel, and we believe SFH will not only continue to produce quality heat detectors but will take Jack’s vision to another level.”

Over the last 5 years SFH has acquired Serva-Lite Sales, SOTA Battery and Battery2000. The company continues to maintain the highest level of service and product quality, growing the business of customers across Canada and throughout North America and other export markets.

Brazil hospital complex installs connected fire alarm system

Brazil’s bustling general practice hospital in São Paulo, the Centro Médico Campinas installed a connected fire alarm system.

Over the past five decades, the hospital campus has undergone significant expansions to add new buildings and specialized healthcare services.

This resulted in installing eleven different, incompatible fire alarm panels across the sprawling campus that required individual monitoring, cleaning, and maintenance.

For seamless, around-the-clock fire safety of the entire premises, clinic operators wanted a unified and future-proof system. The Hospital Centro Médico Campinas chose a system designed by Bosch and implemented by Brazcamp Tecnologia installers in Campinas, Brazil for a completely integrated fire alarm system to provide optimized safety coverage.

The system secures the entire city hospital campus around the clock. All fire detection devices are connected via the Modular Fire Panel 5000 Series from Bosch for improved response times and better maintenance options –including remote maintenance – to the healthcare facility.

The project also required retrofitting of legacy fire prevention equipment and smart connectivity to accommodate the premises’ unique layout. By installing one single, fully customized solution, the hospital:

• Fixed compatibility challenges. Integration and consolidation of all data from connected devices on the fire panel. Thanks to retrofitting of legacy detectors, devices now communicate seamlessly.

• Decentralized access 24/7. Direct access for personnel via remote keypads connected to three desked areas: Main reception, on-site fire department, and operation and control center.

• Entire campus on a single network. Five loop modules cover all areas of Hospital Centro Médico Campinas with panels and detectors, including sensitive environments such as the ICU, operating theater, patient wards, and the hospital laboratory.

• Increased safety response and situational awareness via full integration with gas detection, sprinklers, and access control. As a result, personnel can pinpoint the location of a fire precisely and unlock doors and gates in case of an event for improved evacuation.

As the hospital continues to grow, the flexibility of the new solution allows for future integrations, such as access control and voice alarms.